5 Easy Laser Engraving Projects That Sell FAST
Вставка
- Опубліковано 17 чер 2024
- These are 5 EASY laser engraving projects that will Sell Fast. Stay to the last one because it is the most important!
🔥 Best Budget Laser for Beginners: bit.ly/WeCreatVisionLaser
👉 My FAVORITE LASER: bit.ly/F1UltraUSA
US Store : bit.ly/F1UltraUSA
EU Store: bit.ly/F1UltraEU
UK Store: bit.ly/UltraF1UK
CA Store: bit.ly/UltraF1CA
DE Store: bit.ly/F1UltraDE
FR STore: bit.ly/F1UltraFR
🔥 xTool Exclusive discount code for $80 off: CC10
---------------------------------
👉 xTool F1 (Little Brother)
US Store: bit.ly/3uaPs8Y
UK Store: bit.ly/47BxA5O
EU Store: bit.ly/46k7VNE
CA Store: bit.ly/xToolF1CA
FR Store: bit.ly/xToolF1FR
DE Store: bit.ly/xToolF1DE
--------------------------------
👉 xTool S1 Diode
US Store: bit.ly/48RUUO9
UK Store: bit.ly/46UVSqV
EU Store: bit.ly/46k7VNE
CA Store: bit.ly/xToolS1CA
FR Store: bit.ly/xToolS1FR
DE Store: bit.ly/xToolS1DE
--------------------------------
👉 xTool P2 CO2:
US Store: bit.ly/47m6H6c
UK Store: bit.ly/3FY9Woh
EU Store: bit.ly/3R2dtZ1
CA Store: bit.ly/xToolP2CA
FR Store: bit.ly/xToolP2FR
DE Store: bit.ly/xToolP2DE
🎨 Project Idea Guide Mini eCourse: corneliuscreations.gumroad.co...
- Best Budget Laser for Beginners: bit.ly/WeCreatVisionLaser
🔥 Go all out with this Big Bundle Savings: bit.ly/S140WBigBundle
xTool Owners: Upgrade your laser for safety and savings! Trade in any open diode machine for an enclosed xTool and get up to $500 off: bit.ly/3vOu4XR
Accessories to engrave
-12-Piece Charcuterie Board: amzn.to/48I8QK3
-16-Pack Tumblers: amzn.to/3U9nV2B
-Wallets (Check out other places too) - www.alibaba.com/product-detai...
Promo Code for $80 off: CC10
#xtool #laserengraving #esty
Cornelius Creations proudly holds an affiliation with xTool. Any purchases made through the links will help support the channel at no extra cost to the buyer
00:00 Introduction
00:50 5 Wallet's & Flex Targeting Secret
02:50 4 Charcuterie & Marketing Strategy
04:28 3 Tumblers & Specialty Drinkware
05:20 2 Jewelry & Pets
06:04 1 You & Expert Communication
06:47 One Liner & Opener
👉 xTool F1 Ultra My New FAVORITE Laser 👇
- F1 Ultra US: bit.ly/F1UltraUSA
- F1 Ultra EU: bit.ly/F1UltraEU
- F1 Ultra UK: bit.ly/UltraF1UK
🔥xTool Exclusive discount code for $80 off: CC10
xTool F1: bit.ly/3uaPs8Y
xTool S1: bit.ly/48RUUO9
xTool P2: bit.ly/47m6H6c
-12-Piece Charcuterie Board: amzn.to/48I8QK3
-16-Pack Tumblers: amzn.to/3U9nV2B
🎨 Project Idea Guide: corneliuscreations.gumroad.com/l/inqzE
People should pay attention to the last leg of this video. The marketing logic is on point. Props for that and thanks for the ideas!
Glad you enjoyed it my friend!
I liked this video and appreciate the detail to customer service and finding your market. Working hard on that and focusing great quality and core products customers enjoy and come back for more.
Marketing is everything. Without that, it doesn't matter how cool your product is!! Thanks for the tips. I put you in my collection of subscriptions!!
You're the best!
Another great video... Thanks for all you share with the laser engraving and woodworking community. Looking forward to your next video...
Thank you for the great video!
Great video, thanks for the information.. I will use this and keep my fingers crossed! Appreciate your efforts.
Glad it was helpful!
Awesome video👍🏽👍🏽 that’s some good knowledge keep up the good work. I love to engrave mirrors
Thank you for the kind words! Yes, mirrors are awesome to engrave!
Thank you for a very informative and interesting video.
Glad it was helpful!
Thanks for fantastic video.
Glad you enjoyed it!
great video, and very helpful, thank you
Glad you found it helpful!
Great advice. Thanks.
Glad you enjoyed it!
Great projects!
Glad you like them!
Awesome Bro!!! This is the first video of yours that showed up in my feed. Fortunately. Thank you for taking the time to share the various ideas. I was hit with a jolt🫨⚡ of inspiration with your marketing tip. I was like yeah I can do something like that🤑!!!
Glad it was helpful!
I rarely take the time to comment on a video. You did a great job on this one…with some great tips
Subscribed
The last line is honestly kind of terrifying. What you've said is, essentially, that the average person buys what FEELS good, rather than what IS good. Explains a lot about the current state of the economy.
#1 is the best tip of all
👊🏻👍🏻
So So So cool !
Glad you enjoyed it!
Anything pet related is a great idea. It's been shown that even during a recession, consumers cut back more on purchases for themselves than for their pets. It just goes to show the love. They are family. As I sit here now right in front of me is an engraved frame with a picture of my dog who had passed, I am also wearing an engraved necklace charm in honor of his death. I'm telling you. I work at a small locally owned pet shop. People spend $$$ on things for and about their pets! I wish I could get started! I just keep getting one roadblock after another with my health which is financially preventing me purchasing an engraver. In mean time I will practice carving with help from your videos! Thank You! I will do this!!!
I am happy you are getting a lot from the videos. That is also very valuable insight! I hope you get better soon! Keep hanging in there my friend. I appreciate your support!
Like your marketing idea for posting pictures of your work on social media without a sales pitch. I see how that would work.
Thank you!
Thank for sharing. What are the links for the wallets?
Hi Matt. Sorry i've been away for so long. Moving countries and get started from 0 hasn't been easy. Finally soon will start using my laser engraving machine, but i got a question for you, it only comes with one pair of protective glasses, and i would like to get another as we and my partner will be working with it, the people at the store where we bought it, Crreality distributoirs here in Colombia, told us to buy any that has UV protection which can be cheap, what do you think of this and what do you recommend?? Once again much appreciate the advice and help. Take care!! Thank you!!!
Could you please elaborate on the process you followed to create the design prior to laser engraving it?
How did you get the jig to hold the items
Hey, I really liked your video. I am interested, what do you think about xTool D1 Pro 20W? Does it engrave well on wood, steel etc.?
Thank you for your feedback!
Hey There! The 20W is amazing and will work on just about anything. Depending on the steel, it can mark with discoloration. The 20W is probably my favorite open diode laser.
i want to make my own jewelry..what lazer cutter will cut a sheet of silver or gold into flat pieces like a cross or a 100 other flat shapes shapes..
any suggestions..thanks..doc johnny ..italy
Thanks for the shoutout buddy!! Great video!
Thank you man! Totally misspelled your name! 😫🤣
@@CorneliusCreations not even an issue ! :) I'm basically @ShyneflowLC everywhere :)
I love animals and what you created is beautiful and creative. Nice job!
@jessicaguoan5835 I really appreciate that ! Check out the page have done plenty of different animal pieces :)
Great video, love the ideas! Just to let you know, when i click on the more info button, your link to your course is not active. It is active in the dropdown menu above the messages though.
Thank you my friend! Wow, thanks for letting me know that!!!
Buongiorno. Questa macchina può essere utilizzata su magliette in cotone e calze uomo?
Which xTool are you using for your tumblers?
I change it up all the time! I am currently using my P2 the most for that.
I am a cricut crafter and recently bought a laser engraver wanted the one you have but was not in my budget so I bought the creality laser Falcon volume 2- 10 watts I've looked everywhere to see if i can laser cups and glasses and cannot find an answer can you help, please
Good Video but the 1,00,00 dóllar question. What laser are you using? Does one laser work for the 4 ideas you gave on wood, metal, glass, leather? You linked the F1 but you have a different engraver on your desk.
Thank you for the kind words! At the end of the video, I mentioned you need an F1 or Fiber for anything metal and posted a link on my end screen to a video that will help you find one to fit any budget.
What oil did you use after you engraved on your cutting board in the video?
I used Bayes Food Grade Mineral Oil for Cutting Boards.
"Do ordinary duties extraordinarily well."
~ Saint John Bosco
(I love your channel!)
Thank you!
I live in Idaho, which is the “South” of the northwest. So, I heed your advice.
Haha, thank you!
I have the P2 and F1. Was trying to engrave a ring and can find no good videos anywhere.
Working on some Celtics knots mixed with some letters on a hatchet handle
Yes sir!!! That’s what I’m talking about!
I'm having trouble with Dimond dremel heads. Tungsten carbine is ridiculously expensive. This Dimond dremel heads "chew" the wood so I have to take extra steps. Man idk if I'm ready for Lazer looks expensive. I'm looking for the smooth carbine wood carving. I'm not selling just a project as gifts for now.
[Edit] I went on Amazon and it's a ton cheaper then hardware store. Also I have all the accessories, tank compressor, release value, regulator, needed for the super rpm daddy. So I'm a beginner but I'm over halfway there for ur favorite rotary. I'll let I know when I get it
Awesome! Yes, get some cheap burrs on Amazon at first when carving. Diamond bits are only good for sanding
Burrs-I’ll go research-sons like more to learn-it’s never ending lol
Which page should should I buy as a new user? I know that I want to do jewelry, tumblers, pet or key tags, most likely the wallets, possibly the cutting boards…..ok EVERYTHING you posted:) I do not have a limited pockets or funds. Therefore, this is why I’m asking which engraver is the best overall but on a budget that can do these tasks properly???!!!
**PLEASE HELP:)
Hey there, I cannot tell you which to buy, but I do have a video that will help you find which one would be best. "How to choose the best laser engraver"
I bought a rotary with my diode laser, but I still haven't opened it yet. I really want nothing to do with tumblers. I don't really like them personally, and with my luck I'd sell 100s of them and have to engrave them all one at a time...
Saw your recommended Alibaba store, just how reliable are they?
Many vendors are on Alibaba. I have bought from them many times. Look at seller ratings and I think you should be fine.
Thanks.
what is the price of your product?
2:43 Where is "Alababa"? Is that down south, but with a cold?! 🤣
😘
I want to do this with my poetry but I don't know anything about wood engraving or engravers.
Where do you get the wallet insert?
I had a friend 3d print it for me
"be genuine and honestly care about people", but you told me to be genuine, the two statement conflicts xDDD
xtool is so expensive that I had to find a cheaper alternative.
And I hardly ever carve metal, I work with plywood, and I ended up choosing the Acmer P1 S, I don't think there's a better option for less than $200
Welp. I failed on the #1 😅😂
*Great Video! I really do have a question. For someone with less than $10,000 to invest, how would you recommend we enter the crypto market? I am looking at studying some traders and copying their strategy rather than investing myself and losing money emotionally. What’s your take on this approach*
The key to financial stability is having the right investment suggestions for a diverse portfolio. Many investment failures and losses happen when you invest without proper guidance.
I feel sympathy and empathy for low income individuals who are struggling to survive. If it weren't for my investments with Katrina jornales I wouldn't be where I am today.
Interesting, you also trade with Katrina? That woman has been a blessing to me and my family as well.
This is not the first time I am hearing of this woman and her exploits in the trading world but I have no idea how to reach her?
1:07 You love hunting, and you call that a "value"?
Yes I do. And let me ask, trolling people must be yours? 😁
4:56 "Freedom" "Land of the Free" etc etc....things that Yanks are always going on about. Tell me how Americans are any more "free" than the majority of other civilised countries in the world. How do you actually define freedom, and how does YOUR freedom differ from the type of freedom that so many other countries enjoy?
😘
Thank you for the video! I am new to your channel. What is your opinion on wecreat and xtool M1
Hey there, I made videos on both of those you can check out :)
Great projects!
Glad you like them!