Enjoyed seeing the different jigs they "invented" to do various steps in the box making. I admire all the hard work they're doing for such a worthy cause! The boxes are very nice and will be treasured by those who get them!!!
It’s great! My shed has been completed and it turned out nice looking and sturdy and it is way better than the sheds that many of my neighbors had put up. Of course, I'm pleased with the outcome and this Ryan’s ua-cam.com/users/postUgkxGZedDTcDfgD7fG_uU4esfx_EgxzlY2_1 Plans was extremely useful to me as a guide.
That glue roller, we had the same thing going some 40 years ago, I did some designing back then for boxes that was used in the jewelry industry you know the small box you open for girlfriend and there is the diamond ring. We made rollers like that filled with pva glue so the workers would feed a roll of decorated paper on the top of the rollers and cover the whole paper in glue which they stuck onto the "naked" boxes. Worked very well.
At first glance I thought the same, but there is a lot of custom hand finishing involved. They are really nice boxes. The problem is China could knock them off for $2 a box for a really crappy copy that most people wouldn't notice the difference and would pay $19.99 for.
Good stuff. I have bee hives, and the “man made” panels are terrible to fit together … but Flowhive hives are laser cut, and they are a thing of beauty. Just perfect. Saves so much time at the assembly stage.
Thank you for documenting this Jon, as someone who also does a lot of production work myself it was really cool seeing their thought processes and aiming for efficiency.
When I ran huge amounts of parts the router I always made an inset in a disposable rear plate. Solid guide to the router bit and solid guide as soon as you exit the bit. Seems other wise you always stand a chance to clip the trailing corner.
@@justinsk1 LOL you are brainwashed. You should realize that this kind of wood working is done in Asia, and they can make this better as well. The box shown on this video is also mass produce if you haven't realized it. They made a template and then mass produced it themselves. I can go to China and have a local woodworker make this same product and same quality for less than $5 each for 1000 pieces. You should also understand that China makes cheap low-quality products because their western customers like Walmart wants the products to be made at the lowest quality as they are not willing to pay for quality products. Western businesses also realize that it's better to sell cheap merchandise that will break so that people will buy a new one in a year or less.
Is it just me or was anyone else sad when the striking detail of the burn from the laser came off the joints of the boxes. Fantastic attention to detail in every aspect. Congratulations.
Nice work on the details in the video for those watching. It goes to show the hard work it takes to make these things. Some people don’t understand the cost in equipment, time, material, and such. That $100,000 is not pure revenue either. Good work! I am curious why you all chose to go with a laser vs. a cnc router? A CNC router would use less power, machine may have cost less, could have cut more material all at once, not had the burn marks, etc.
Inside corners of CNC routers are not going to be as crisp and square. That would have to be taken care of. The engraving on a CNC takes a bit longer. The size of the CNC would probably be a little bit bigger to accomplish the same amount of capacity. More capacity, bigger machine. CNC is much louder. More moving parts. Dust collection is a pain. More waste with a CNC. Also, their bottleneck is not the laser capacity. It's the manual labor going into each box. They don't need the extra capacity of a CNC. There are a lot of reasons why the laser makes sense. My ideal shop has a cnc and laser setup, but for this type of product the laser makes a lot of sense.
Should be using UV 3M Light Cure Adhesive for instant curing with no clamps! For $100 a box probably cheap to contract it out by the look of it, should be under $20 a box tops!
Hello, Suggestion: For the finger groove, rather than the full long finger groove… make a jig to push the box into the knife on the router table so the result just a centered round groove. Your thoughts?
Should be a good project for everyone involved. People get a nice bespoke hand made real wood salt box. Charity gets a sizeable amount. Good steady work for the company building them. Laser is a no brainer for this project.
If you guys with all of the negative comments took this video as an incentive to get off your ass and use whatever tools at your disposal to create a niche business and make a few bucks then that's great! I'm happy for him because that means that any one of us could do the same thing! The people that are taking any bit of useful information from this or any other video are the ones that will benefit one way or another. In other words... You don't have to criticize. Be inspired and learn everyday! ✌🏼🌎👍🏼
What a fantastic video of process and efficiency and the detail required, I just hope you guys can make money from this fine workmanship This was one the best walk through videos on UA-cam. The most significant message here is the investment of machinery to make this very well made box.
The best on of the best on UA-cam? If you gonna suck up do it bigger, don't say it's one of the best on UA-camsay it' is THE BEST walkthrough not only on UA-cam but on planet Earth and if anyone else makes boxes they should watch this first and if it doesn't turn out this good, throw it away and start over. And if after 3 tries it's not even close, (which it won't be because this is the Michael Jordan of boxes) then either quit and find another job to do, or give up on everything because clearly failing hasn't taught you anything.
I'm a big fan of Brad and Kenji, but I unfortunately missed out on the first 2 preorder runs. It was really cool to see the work that goes on behind the scenes to make them. And hopefully I will be able to get in on the next run.
Great to see how much thought you've put into the process. People think cutting parts using a laser takes the craftsmanship out of the process. Clearly not!
Interesting to see a small run of production like this, thanks, Jon! Really good point on how prepping all that 3/8 stock would have been a huge time sink,
Very nice. If you ever decide to upgrade that laser, you will be blown away by the Trotec. I just snagged by second Trotec. Massive difference in speed and quality. Nice work!
Love it when worlds collide. I’m a huge fan of Kenji’s channel and remember when he announced this project. Kinda forgot about it though and didn’t think I’d see it resurface on your channel. Very cool, Jon,
Totally fascinating video brilliantly explained I personally am useless at wood work of any time but I appreciate production technique and process ,also thanks for mentioning costs .
This is very cool - all of it: the project, the cause, and the process. I love the scale-up-to-mass-production process. Like, I don't enjoy the mass production itself. Rather, I enjoy the figuring out a more efficient way to do the production. My biggest problem trying to do things like this (on a much smaller scale, obv) is not getting wrapped around the axle trying to make the process more efficient at every step. In fact, I had to take my iPad out of the keyboard folio and watch the video a second time because the first time thru, all I could think about was how would I try to do each of the steps, and I kept finding myself opening Notes to write something down. For example, in the block plane step, I'd have probably mounted the plane and a reference 90º board in the vise to save the time having to insert/tighten/loosen every piece getting planed.
I wonder if the shaper bit can go high enough that you could run the boxes upright. I’d also consider using a cove bit so you don’t create that hard inside edge. This was really cool to see the process and kind of how it is evolving. Heard about this on Working Hands a little so it’s nice to see some visuals of what they were discussing.
I’m wondering if using a CNC router would be faster? It could cut the rabbits and round-over, and even engrave the names, saving the router / shaper steps.
Love the GSJ guys so much that I'm a Patron. Thanks Jon for making this video. I've been hearing about these damn boxes for months. It was great to finally see you document them making them. Hell, I might even design one, cut it out on my laser and have one for my kitchen. P.S. I love the way you guys are collaborating. Hope to see you in 2023 at Maker Camp!
QUestions. Why is system sealed up with tape? Is it to keep the airflow coming from outside? Also, is this a 130w or a 100w? Nice video showing the different tools and steps.
People commenting on the $100/box need to understand that is the retail price people were paying for this celebrity-chef signed salt-box and $25 of that goes to the charity. Jeff doesn't say how much he was paid for the run of 1000, but look how much effort went into those boxes that tied up his shop for days on end.
Great project guys! Have you ever considered building a pneumatic clamping fixture and using RF to cure the joints? Its dead easy and takes 30 seconds to complete the box and no huge pile of clamps needed. Also if you dont mind me saying - that rebate idea to lift the lid spoils the look. Why didn't you just have a thumbnail route in the centre - just as easy to produce and neater. Love the boxes though and wish I had invested in a laser years ago.
@@isaackvasager9957 Hi Isaac - 18 years ago I was managing a woodworking company making various wood furniture items for high end stores. One of the items was an oak bath panel consisting of a framework using mortice and tenon joints with raised panels inserted into slots. We had to produce between 600 and 850 units per week and even though we had a considerable factory floor there was no way we could afford to have panels in clamps for any length of time, considering we had a product range of several hundred items. I did consider a windmill clamping press but that would have taken up too much room as the bath panels were 1700 x 700 x 25 mm. After much searching I found a company which could provide a matrix clamping station together with an RF gun which could cure the joints almost instantly. The frames had the glue applied using pneumatic glue guns with special shaped nozzles which ensured glue was applied all round the mortices. They were then pushed together and dropped into the pneumatic rig which then forced the joints tightly together totally square and to size. Each joint was then zapped with the RF gun which cured the glue straight away allowing the operator to remove the panel immediately and send it through our multi belt surface sander. We had to experiment with the glue dose to ensure we didn't get too much squeeze out but it was time well spent. We never had a single failed joint over the five year period we were making those panels and the pneumatic rig was easily adjusted for other products to be assembled. This was in England and as I have been retired for nearly six years I cannot remember the company name who supplied the equipment but I am sure a Google search will show up a company in the US who can help you. It was one of my best buys and I could not recommend it enough for mass production.
Awesome video Jon! Obviously a ton of work goes into making those small boxes. It's nice that a portion of the funds are being donated to that charity! On a side note, I would have made the top of the box 1/4" wider in order to negate having to cut out that channel which would save a lot of time. 👍👍
How interesting. A lovely box, and the way the guys are looking for efficiencies and ways to streamline the process is intriguing. Doing something for 'production' is certainly different than something custom, or one-off. [that laser makes nice cuts]
I'm wondering if there was any reason why they couldn't rotate half the pieces 180 degrees on the template to interlock the joints repeated pattern to save a lot of laser passes and time. Or why they couldn't get a little bit wider pieces of wood to template them all 90 degrees rotated so they share the flat sides to save on material and a bunch of passes for time.
One reason not to optimize the cuts in that manner (one pass cuts the fingers for the adjoining pieces) is that the kerf of the laser on thick material like that would make the joints very loose. If you notice when he assembles the box, the joints are perfectly snug. They would not be if the same cut was used for both sides.
At 18:00 I would also route the front edge of the top, And perhaps route a 1/4 bit along the horizontal cut on the front piece. If you do this, send me one. Cheers.
Creo que están totalmente locos en hacer mil cajas de esa manera Yo no tengo la respuesta exacta de cómo optimizar la forma de fabricación pero me da la sensación impresión de que no es la manera más rápida y más eficiente seguramente lleva muchísimo tiempo pero hay que buscarle la vuelta y la opción de ideas para trabajar menos y que sea más efectivo la fabricación de 1000 cajas es muchísimo lo que están haciendo
Nice video. Too bad we didn't get to see a finished product. That should've probably helped justifying to some of your viewers easier the $100 price tag, not that for the amount of work and how well made the box is, it's not already. The only thing I would've done differently design wise is the finger slots for opening. I find that square rabbet too much. I would have tapered that upper front outside corner ever so slightly. You don't need a lot of room for a finger to catch that lid and lift it up. But maybe the finish product would've proved me wrong. Cheers.
Awesome video and project! It was really neat to see how you problem-solved for a project of this size. Do you think you will sell the laser cut files?
a Co2 laser shouldn't produce an hourglass shaped beam. That is more typical with plasma. At least in an industrial application. The Co2 laser should produce an inverted cone. There is a lot of factors in that though. Focal Length and focus would change beam size/shape. Regardless, typical Co2 beam kerf should float around .003"-.005" with a 5 inch focal length. Beautiful work though!
So, rough estimate. $100,000. 25k to charity. 25k to those that made them. Minus materials. And 50k to those that sold them. And they look like heros for giving 25k to charity. I'm just guessing how they split the money. Which still isn't bad for maybe 2 weeks of work for 3 or 4 guys.
one hundred dollars for a box like this? okay i mean you donated something, maybe then people are more generous in general and the box is really looking good, but 100 dollars? WOW! that's much money for stuff i could cut with ease with my own desktop laser.
0:00: ⚙️ Collaborative production of 1000 salt boxes using laser cutting technology for pre-finishing and assembly. 4:17: ⚙️ Efficient production process for making boxes using a specific stacking method to save time and steps. 8:43: ⚙️ In the woodworking project, a glue jig with silicon wheels is used to speed up the slow process of applying glue to the box joints. 12:51: 🔨 Crafting a precision box with fixed pins and free-moving lid using a custom jig, drill press, and brass pins. 17:49: 🔨 Woodworking process using various sanders and finishing techniques to create boxes. Recapped using Tammy AI
Enjoyed seeing the different jigs they "invented" to do various steps in the box making. I admire all the hard work they're doing for such a worthy cause! The boxes are very nice and will be treasured by those who get them!!!
It’s great! My shed has been completed and it turned out nice looking and sturdy and it is way better than the sheds that many of my neighbors had put up. Of course, I'm pleased with the outcome and this Ryan’s ua-cam.com/users/postUgkxGZedDTcDfgD7fG_uU4esfx_EgxzlY2_1 Plans was extremely useful to me as a guide.
That glue roller, we had the same thing going some 40 years ago, I did some designing back then for boxes that was used in the jewelry industry you know the small box you open for girlfriend and there is the diamond ring. We made rollers like that filled with pva glue so the workers would feed a roll of decorated paper on the top of the rollers and cover the whole paper in glue which they stuck onto the "naked" boxes. Worked very well.
That guy just before 12 minutes 👍👍👍👍👍👍 smiles and pride in the work. F yes!
$100 for a mini box is madness
Oh man making box's is cool! You should see Japanese made box's. I love box's!
Just give me 10 for 1 and I will make it
It's got a charity
mad the right way , if he can get it .. People pay idiotic (subjective) prices for art , cars ... good luck to him..
At first glance I thought the same, but there is a lot of custom hand finishing involved. They are really nice boxes. The problem is China could knock them off for $2 a box for a really crappy copy that most people wouldn't notice the difference and would pay $19.99 for.
That gluing jig is pure genius!
Excellent video.
Is someone really paying $100 per box? Wow, I wish I had customers like that! Well done. I am envious.
I think they may have messed up big time on the math , maybe 10,000 but not 100 lmao
@@timmayvns actually he is saying that's the price that his client selling for.
Watching the video all the way thru I agree, it IS a hundred dollar box. They are lovely.
Good stuff. I have bee hives, and the “man made” panels are terrible to fit together … but Flowhive hives are laser cut, and they are a thing of beauty. Just perfect. Saves so much time at the assembly stage.
Thank you for documenting this Jon, as someone who also does a lot of production work myself it was really cool seeing their thought processes and aiming for efficiency.
When I ran huge amounts of parts the router I always made an inset in a disposable rear plate. Solid guide to the router bit and solid guide as soon as you exit the bit. Seems other wise you always stand a chance to clip the trailing corner.
Beautiful boxes and loved watching this amazing process.
That was fantastic! Much thanks for taking the time- both off the task, and recording, editing, posting. Generous insight.
ok manufacturing part is easy and understandable, but hardest part is how do hell you can sell 10usd box for 100 usd
only him dream sell 100$ max 20$ box
$100 for a salt box? Does the box magically get replenish?
Lol
What’s it worth? Whatever someone will pay for it.
Suckers used to be born every minute. Now it's like every second, lol.
You're paying for custom woodworking not Chinese crap from BBB.
@@justinsk1 LOL you are brainwashed. You should realize that this kind of wood working is done in Asia, and they can make this better as well. The box shown on this video is also mass produce if you haven't realized it. They made a template and then mass produced it themselves. I can go to China and have a local woodworker make this same product and same quality for less than $5 each for 1000 pieces.
You should also understand that China makes cheap low-quality products because their western customers like Walmart wants the products to be made at the lowest quality as they are not willing to pay for quality products. Western businesses also realize that it's better to sell cheap merchandise that will break so that people will buy a new one in a year or less.
Is it just me or was anyone else sad when the striking detail of the burn from the laser came off the joints of the boxes. Fantastic attention to detail in every aspect. Congratulations.
not me, laser wood stinks like a house fire, hopefully sanding it off will help
What a beautiful contrast before the laser char was sanded off! Final product is still very nice.
@@rootvalley2 agree! There are also ways with water and soap. Works quite nice and don't stinks at all after that procedure.
For those who do a lot of laser work, it makes the final product look cheap, and it's smelly as well.
@@bemccune7671 maybe ... I'm just a potential client stating a preference
Nice work on the details in the video for those watching. It goes to show the hard work it takes to make these things. Some people don’t understand the cost in equipment, time, material, and such. That $100,000 is not pure revenue either. Good work! I am curious why you all chose to go with a laser vs. a cnc router? A CNC router would use less power, machine may have cost less, could have cut more material all at once, not had the burn marks, etc.
It's a freaking laser, might have been a dr. Evil sort of decision. I can't blame him.
Are you serious? , you think that these are worth 100 per box ? .. to store salt … give me a break
Inside corners of CNC routers are not going to be as crisp and square. That would have to be taken care of. The engraving on a CNC takes a bit longer. The size of the CNC would probably be a little bit bigger to accomplish the same amount of capacity. More capacity, bigger machine. CNC is much louder. More moving parts. Dust collection is a pain. More waste with a CNC. Also, their bottleneck is not the laser capacity. It's the manual labor going into each box. They don't need the extra capacity of a CNC. There are a lot of reasons why the laser makes sense. My ideal shop has a cnc and laser setup, but for this type of product the laser makes a lot of sense.
Should be using UV 3M Light Cure Adhesive for instant curing with no clamps!
For $100 a box probably cheap to contract it out by the look of it, should be under $20 a box tops!
Hello,
Suggestion:
For the finger groove, rather than the full long finger groove… make a jig to push the box into the knife on the router table so the result just a centered round groove.
Your thoughts?
Should be a good project for everyone involved. People get a nice bespoke hand made real wood salt box. Charity gets a sizeable amount. Good steady work for the company building them. Laser is a no brainer for this project.
If you guys with all of the negative comments took this video as an incentive to get off your ass and use whatever tools at your disposal to create a niche business and make a few bucks then that's great! I'm happy for him because that means that any one of us could do the same thing! The people that are taking any bit of useful information from this or any other video are the ones that will benefit one way or another. In other words... You don't have to criticize. Be inspired and learn everyday! ✌🏼🌎👍🏼
Thanks Hank👍
@@JonPetersArtHome You're quite welcome! Keep doing your thing!
What a fantastic video of process and efficiency and the detail required, I just hope you guys can make money from this fine workmanship
This was one the best walk through videos on UA-cam. The most significant message here is the investment of machinery to make this very well made box.
The best on of the best on UA-cam? If you gonna suck up do it bigger, don't say it's one of the best on UA-camsay it' is THE BEST walkthrough not only on UA-cam but on planet Earth and if anyone else makes boxes they should watch this first and if it doesn't turn out this good, throw it away and start over. And if after 3 tries it's not even close, (which it won't be because this is the Michael Jordan of boxes) then either quit and find another job to do, or give up on everything because clearly failing hasn't taught you anything.
Just fucking with you. I am stoned, love sarcasm and fucking with people when Im high. You put it on the tee, I felt it was my duty to swing..
I'm a big fan of Brad and Kenji, but I unfortunately missed out on the first 2 preorder runs. It was really cool to see the work that goes on behind the scenes to make them. And hopefully I will be able to get in on the next run.
For the lid opening just use a single biscuit "hole"? Right at the top of the front panel.
Great to see how much thought you've put into the process. People think cutting parts using a laser takes the craftsmanship out of the process. Clearly not!
Good on ya...for donating 25% proceeds to No Kid Hungry! Explains, and justifies high price point.
Interesting to see a small run of production like this, thanks, Jon! Really good point on how prepping all that 3/8 stock would have been a huge time sink,
Always great to have you in the shop, Jon!
I actually liked the boxes unsanded with the contrasting edges a lot more that the finished versions. I liked them a LOT more.
Tight shop doing good work. Damned surprising there’s still people doing this in North America.
Very cool! Why not make the lid a bit wider and forgo the rabetting step?
Very nice. If you ever decide to upgrade that laser, you will be blown away by the Trotec. I just snagged by second Trotec. Massive difference in speed and quality. Nice work!
This was really interesting. As someone thinking of a mass production setup it was really great to see how this flows.
Love it when worlds collide. I’m a huge fan of Kenji’s channel and remember when he announced this project. Kinda forgot about it though and didn’t think I’d see it resurface on your channel. Very cool, Jon,
its a small world after all lol
Totally fascinating video brilliantly explained I personally am useless at wood work of any time but I appreciate production technique and process ,also thanks for mentioning costs .
Poor Rob sounds like he's gone crazy 😂he made me laugh good work lads
Thank you for the help in solving a problem I was having with the hinged joint on my own box project.
This is very cool - all of it: the project, the cause, and the process. I love the scale-up-to-mass-production process. Like, I don't enjoy the mass production itself. Rather, I enjoy the figuring out a more efficient way to do the production. My biggest problem trying to do things like this (on a much smaller scale, obv) is not getting wrapped around the axle trying to make the process more efficient at every step. In fact, I had to take my iPad out of the keyboard folio and watch the video a second time because the first time thru, all I could think about was how would I try to do each of the steps, and I kept finding myself opening Notes to write something down. For example, in the block plane step, I'd have probably mounted the plane and a reference 90º board in the vise to save the time having to insert/tighten/loosen every piece getting planed.
Nice shop, why not cut the lid a 1/4 inch wider and skip cutting the box? Can you send the boxes out as a kit ? let the customer glue and sand.
Looks great and they paid that bit extra to share the work around.
Charity is best way to sell product. No one will buy this box for $75. But they will for $100 if $25 goes to a charity.
I wonder if the shaper bit can go high enough that you could run the boxes upright. I’d also consider using a cove bit so you don’t create that hard inside edge. This was really cool to see the process and kind of how it is evolving. Heard about this on Working Hands a little so it’s nice to see some visuals of what they were discussing.
You mean having the shaper come from the top? Thats a way more unsafe method imo.
I’m wondering if using a CNC router would be faster? It could cut the rabbits and round-over, and even engrave the names, saving the router / shaper steps.
Hey, I remember you from the video about Vesting LED Hardwax oil, which I still use to this day.
To bad you have to sand off the burn on the ends of the boxes. I think it looks better that way. Regardless, a very cool process. Kudos to you, guys.
Love the GSJ guys so much that I'm a Patron. Thanks Jon for making this video. I've been hearing about these damn boxes for months. It was great to finally see you document them making them. Hell, I might even design one, cut it out on my laser and have one for my kitchen. P.S. I love the way you guys are collaborating. Hope to see you in 2023 at Maker Camp!
That's why I will say; God bless your country.

Looks like my next project is building one by hand. Thanks for the tips.
Great video. Shows just how to work around a big project,- love it. Thanks for sharing.
QUestions. Why is system sealed up with tape? Is it to keep the airflow coming from outside? Also, is this a 130w or a 100w? Nice video showing the different tools and steps.
100 per box!? That's nuts.
I think it's cherry rather.
People commenting on the $100/box need to understand that is the retail price people were paying for this celebrity-chef signed salt-box and $25 of that goes to the charity. Jeff doesn't say how much he was paid for the run of 1000, but look how much effort went into those boxes that tied up his shop for days on end.
Great project guys! Have you ever considered building a pneumatic clamping fixture and using RF to cure the joints? Its dead easy and takes 30 seconds to complete the box and no huge pile of clamps needed. Also if you dont mind me saying - that rebate idea to lift the lid spoils the look. Why didn't you just have a thumbnail route in the centre - just as easy to produce and neater. Love the boxes though and wish I had invested in a laser years ago.
I agree with you on the lid. Make the lid just a little wider and bullnose it like the back side. It will look much better.
RF to cure joints? Can you elaborate on that?
@@isaackvasager9957 Hi Isaac - 18 years ago I was managing a woodworking company making various wood furniture items for high end stores. One of the items was an oak bath panel consisting of a framework using mortice and tenon joints with raised panels inserted into slots. We had to produce between 600 and 850 units per week and even though we had a considerable factory floor there was no way we could afford to have panels in clamps for any length of time, considering we had a product range of several hundred items. I did consider a windmill clamping press but that would have taken up too much room as the bath panels were 1700 x 700 x 25 mm. After much searching I found a company which could provide a matrix clamping station together with an RF gun which could cure the joints almost instantly. The frames had the glue applied using pneumatic glue guns with special shaped nozzles which ensured glue was applied all round the mortices. They were then pushed together and dropped into the pneumatic rig which then forced the joints tightly together totally square and to size. Each joint was then zapped with the RF gun which cured the glue straight away allowing the operator to remove the panel immediately and send it through our multi belt surface sander. We had to experiment with the glue dose to ensure we didn't get too much squeeze out but it was time well spent. We never had a single failed joint over the five year period we were making those panels and the pneumatic rig was easily adjusted for other products to be assembled.
This was in England and as I have been retired for nearly six years I cannot remember the company name who supplied the equipment but I am sure a Google search will show up a company in the US who can help you. It was one of my best buys and I could not recommend it enough for mass production.
@@elizabethjennings3825 ssoo....RF...
as in "radio frequency"?
Awesome video Jon! Obviously a ton of work goes into making those small boxes. It's nice that a portion of the funds are being donated to that charity! On a side note, I would have made the top of the box 1/4" wider in order to negate having to cut out that channel which would save a lot of time. 👍👍
I agree, but extra 1/4" would made them harder to fit in shipping boxes.
How interesting. A lovely box, and the way the guys are looking for efficiencies and ways to streamline the process is intriguing. Doing something for 'production' is certainly different than something custom, or one-off. [that laser makes nice cuts]
Nice look at almost all the process. Very interesting video.
I'm wondering if there was any reason why they couldn't rotate half the pieces 180 degrees on the template to interlock the joints repeated pattern to save a lot of laser passes and time. Or why they couldn't get a little bit wider pieces of wood to template them all 90 degrees rotated so they share the flat sides to save on material and a bunch of passes for time.
One reason not to optimize the cuts in that manner (one pass cuts the fingers for the adjoining pieces) is that the kerf of the laser on thick material like that would make the joints very loose. If you notice when he assembles the box, the joints are perfectly snug. They would not be if the same cut was used for both sides.
I use a laser cutter every day and the machine is always dirty, yours is clean.
That laser....
...is the sharpest tool in the box 😃
$100,000 Lazer Project ....you mean Laser, like BossLaser has on it !??! Neat project.
Love seeing the production setup, nice work!
The laser is shaped like an hour-glass? He means cone right? Like a wedge? Great video
How are you getting $100 a box
Very nice boxes. Cool is Bob.
Fascinating to see the step-by-step process. And I’ll echo the praise of Ocooch Hardwoods- clean, clear lumber and plywood at a fair price.
NORMALIZED VOLUME!!! Great video and great sound editor.
At 18:00 I would also route the front edge of the top, And perhaps route a 1/4 bit along the horizontal cut on the front piece. If you do this, send me one. Cheers.
It's a pity that you had to sand the boxes as I think that the back from the Lazer cutting looks cool
Fascinating. Assembly of 1,000 boxes must be mind-numbing, though, so kudos to all involved.
One piece flow would help you reduce production time. Check out batch production vs one piece flow
my mum has salt boxes exactly like those one but she bought them about 20 years ago
Excellent video about a very well thought out process. Another great Jon Peters and Greene St collab!
Thanks Matt! Looking forward to seeing next week!
Do you use a laser for the char look?
Very good , looks priceless ❤
Thanks for the information 👍
Awesome ❤️
Good luck ✌️
Creo que están totalmente locos en hacer mil cajas de esa manera Yo no tengo la respuesta exacta de cómo optimizar la forma de fabricación pero me da la sensación impresión de que no es la manera más rápida y más eficiente seguramente lleva muchísimo tiempo pero hay que buscarle la vuelta y la opción de ideas para trabajar menos y que sea más efectivo la fabricación de 1000 cajas es muchísimo lo que están haciendo
Very interesting video. I'd like to see more of this type.
Lot of interesting problem solving
Extremely tedious and lots of work but the are beautiful. Good cause too !
Who the hell would pay 100 bucks for one salt box??
awesome shop and build. great teamwork
That’s awesome that you can charge $100/box
I need clients like this.
that's a lot of investment and process going into this project. Top Job!!! 🧠
Very cool, Jon~! I really like seeing the projects that Greene Street puts out. Very well devised process. Thanks for sharing this video~!
If the kerf is smaller on one side, due to the shape of the Lazer, doesn't that mean the parts are, slightly, out of square?
Nice video. Too bad we didn't get to see a finished product. That should've probably helped justifying to some of your viewers easier the $100 price tag, not that for the amount of work and how well made the box is, it's not already. The only thing I would've done differently design wise is the finger slots for opening. I find that square rabbet too much. I would have tapered that upper front outside corner ever so slightly. You don't need a lot of room for a finger to catch that lid and lift it up. But maybe the finish product would've proved me wrong. Cheers.
some people might like the burnt edges, so that would save a lot of work, wouldn't it?
Awesome video and project! It was really neat to see how you problem-solved for a project of this size. Do you think you will sell the laser cut files?
Keep craft alive!
Very cool! Thanks for sharing!
I thought that glue on the burned sides won't really stick. I always sand it down.
a Co2 laser shouldn't produce an hourglass shaped beam. That is more typical with plasma. At least in an industrial application. The Co2 laser should produce an inverted cone. There is a lot of factors in that though. Focal Length and focus would change beam size/shape. Regardless, typical Co2 beam kerf should float around .003"-.005" with a 5 inch focal length. Beautiful work though!
This was awesome to see. I just purchased a Thunder USA Laser and may try to make some of these or something similar. Great content Jon.
Awesome process & great box!
Made America! I love it🎉
So, rough estimate. $100,000. 25k to charity. 25k to those that made them. Minus materials. And 50k to those that sold them. And they look like heros for giving 25k to charity. I'm just guessing how they split the money. Which still isn't bad for maybe 2 weeks of work for 3 or 4 guys.
@13:30, what brand / model is that drill press? Wow! Super quiet! Me like!
Nothing to it but to do it…great mindset
one hundred dollars for a box like this?
okay i mean you donated something, maybe then people are more generous in general and the box is really looking good, but 100 dollars?
WOW! that's much money for stuff i could cut with ease with my own desktop laser.
You should make one and time it. Price went up now $110.00 and sold out
0:00: ⚙️ Collaborative production of 1000 salt boxes using laser cutting technology for pre-finishing and assembly.
4:17: ⚙️ Efficient production process for making boxes using a specific stacking method to save time and steps.
8:43: ⚙️ In the woodworking project, a glue jig with silicon wheels is used to speed up the slow process of applying glue to the box joints.
12:51: 🔨 Crafting a precision box with fixed pins and free-moving lid using a custom jig, drill press, and brass pins.
17:49: 🔨 Woodworking process using various sanders and finishing techniques to create boxes.
Recapped using Tammy AI