Man. I need to get an RBC intake! Congratulations on such a great milestone reaching 200 videos. It ain't easy being consistent. Keep it up. Also I am enjoying the new mic. You need to upgrade to a Sony A6000 next!
Hey mate, please do RSX/DC5, k20a2,z3/k24a2,a3 on base model swap guide video next if you can. I would be so thankful, I ve been subscriber for a long time now, following you, and really admire your knowledge on hondas. Thank you for the videos! Greetings from Australia.
Hey can I ask you some question of a kswap I’m doing it’s my first build I’m new to this I use to have an 09 si sedan and I bought a 96 civic sedan to do the swap to it? I got the whole engine full transmission cables clutch lines etc what parts I could still use from the si ?
question so i have a z3 swapp and i can use my pulley and alternator and take out the ac compressor and how about pS and what belt does that 50 and half come off of
@@rarewitit7899 i got an integra 2000 but a have a full z3 swap but w 02-04 harness and I’m get a pnd or prb 02-04 I got a prb 05-06 but I can’t use since I have 02 harness and supposedly 05-6 doesn’t have vtec But I’m asking about the pulley I just remove the air condition Compressor that’s all and ask for that belt ? Or I gotta remove PS pump too?
@@rarewitit7899 I have 02-04 harness I have the 05-06 ecu some asshole sold me it got me for a lot he knew I didn’t know much and knew I had 02-04 harness I just didn’t know how tell the computer
Yoo I got a k20z3 engine and transmission already I'm trying to get it into a automatic ek civic I took the engine out and right now I'm prepping the engine bay for paint, try to give me a parts list of what I need please I know I need Hybrid racing shifter Hasport mounts Some axles Like I said right now I'm just waiting on a eg dc subframe so I'm painting my engine bay and ima install the clutch pedal and brake pedal this weekend
What upper rad hose did you use ? Also is it the stock d series radiator on the civic ? Currently k swapping my civic and wanted to know if I need to get a radiator with a bigger outlet for the hose.
@rarewitit I have shell type s and found donor type s, what do need to prepare to transfer everything over. Will there be an issue with immobilizer / ignition? Or am i good and just transfer ignition lock everything from donor to shell, thanks
Love the videos brotha. Question I have a k24a what alternator, water pump housing and water pump, and starter can I use if I’m using an 02 to 04 engine harness? I also have a z3 transmission. Do I need to get the speed converter as well. Please get back to me at your convenience
Thank you for this summary video! Im thinking of going with a k20z3 trans with the k24a2 in the sw20 chassis. If i buy the hux racing cut hybrid shifter do i still need to swap to the type s shift selector and shifter cables or can i keep the z3 shifter cables and selector?
Good vids, very informative! I just did a K24 swap on a MR2 Spyder in my garage and your vids helped tremendously!
Thanks I appreciate your input
Right on. Basically educational content!
This is some great info man ⚡️ this will save someone a lot of time researching
Man. I need to get an RBC intake! Congratulations on such a great milestone reaching 200 videos. It ain't easy being consistent. Keep it up. Also I am enjoying the new mic. You need to upgrade to a Sony A6000 next!
Thx bro
I'll do my first k20a3 swap to ek hatch. Hopefully it'll go smoothly as possible. Excellent videos man keep it up!
how did it go?
I'll pay the 7500 price you ask shipped, btw the audio on this video I like
Which car ?
Bolo Yaj do it! He dose great builds.
Good information 😊
Thx bro
Been watching for a little while dude, your content is underrated. Awesome content
Thx I appreciate it
Great video, very helpful info!
Thank you
Hey mate, please do RSX/DC5, k20a2,z3/k24a2,a3 on base model swap guide video next if you can. I would be so thankful, I ve been subscriber for a long time now, following you, and really admire your knowledge on hondas. Thank you for the videos! Greetings from Australia.
Sounds good , will try that soon on part 2 or 3
Thx so much for watching
Hey can I ask you some question of a kswap I’m doing it’s my first build I’m new to this I use to have an 09 si sedan and I bought a 96 civic sedan to do the swap to it? I got the whole engine full transmission cables clutch lines etc what parts I could still use from the si ?
Ecu doesn’t work or throttle body , harness , need speed converter , Rsx harness and Ecu
Hey bro. So for a 2011 CRZ can i use all the parts from say like a 06-11 civic Si ? Including axles and ecu? Or will i need flashpro or hondata?
Your would need custom axles with flash pro
Question does anyone know if the mount kit would fit a k20 automatic for a eg hatchback swap
Auto won’t work
What charge harness did u use?
Hybrid racing
Is it possible to use the harness that comes with the k20z3 or I have to use the rsx type s harness wats the reason for going the the rsx one?
K20z3 is drive by wire and they don’t make any conversion harness for it , Rsx is cable and has a conversion harness
question so i have a z3 swapp and i can use my pulley and alternator and take out the ac compressor and how about pS and what belt does that 50 and half come off of
Not sure which car , I just go to autozone and tell them 7 rib 50 1/2
@@rarewitit7899 i got an integra 2000 but a have a full z3 swap but w 02-04 harness and I’m get a pnd or prb 02-04 I got a prb 05-06 but I can’t use since I have 02 harness and supposedly 05-6 doesn’t have vtec
But I’m asking about the pulley I just remove the air condition Compressor that’s all and ask for that belt ? Or I gotta remove PS pump too?
Just delete ac and run the belt nothing else needed , how much would you sell the 05-06 harness for ?
@@rarewitit7899 I have 02-04 harness I have the 05-06 ecu some asshole sold me it got me for a lot he knew I didn’t know much and knew I had 02-04 harness I just didn’t know how tell the computer
Yoo I got a k20z3 engine and transmission already I'm trying to get it into a automatic ek civic I took the engine out and right now I'm prepping the engine bay for paint, try to give me a parts list of what I need please I know I need
Hybrid racing shifter
Hasport mounts
Some axles
Like I said right now I'm just waiting on a eg dc subframe so I'm painting my engine bay and ima install the clutch pedal and brake pedal this weekend
Check out my channel I give step by step on ek
@@rarewitit7899 ok thank you so much if I get stuck on something I'll message you
Do you get bad vibration using rsx base axles going 70+ mph?
Nope
@@rarewitit7899 thank you for answering. Turns out I have bad hub bearings.
What upper rad hose did you use ? Also is it the stock d series radiator on the civic ? Currently k swapping my civic and wanted to know if I need to get a radiator with a bigger outlet for the hose.
Stock radiator , civic Si hoses
@rarewitit I have shell type s and found donor type s, what do need to prepare to transfer everything over. Will there be an issue with immobilizer / ignition? Or am i good and just transfer ignition lock everything from donor to shell, thanks
Just need to swap the ignition with key and Ecu matching should be good
Love the videos brotha. Question I have a k24a what alternator, water pump housing and water pump, and starter can I use if I’m using an 02 to 04 engine harness? I also have a z3 transmission. Do I need to get the speed converter as well. Please get back to me at your convenience
Acura Rsx type , yea you need converter
What engine harness you used?
Acura Rsx
What axles for 92-95 Eg?
Rsx
I have a 99 civic and a k24a what are all of my options for ecu? Just doing all motor right now.
Stock Ecu or hondata
Stock ecu for budget
I know about
02-04 rsx base 5 speed
02-04 type s
But the price lol is there a cheaper route
Not really that’s the only route
Okay thanks man
type r ECU??
Very helpful video, do you do swaps for customers?
Yea I do swaps for customers
@@rarewitit7899 cool how can i contact you bro
Honda.mike1988@gmail.com
You do swaps in California
Yea I do swaps in California
@@rarewitit7899 I need your info I need a swap done real soon what’s your iG
Rarewitit_ or Honda.mike1988@gmail.com
Thank you for this summary video! Im thinking of going with a k20z3 trans with the k24a2 in the sw20 chassis. If i buy the hux racing cut hybrid shifter do i still need to swap to the type s shift selector and shifter cables or can i keep the z3 shifter cables and selector?
You would need the Rsx shift selector with Rsx cables
Nice content bro, just wondering what axles you used for the green eg? I’m doin a k20a2 on my eg hatch, does ep3 axles works or get rsx base?
Thx , I used Rsx base axles
Where are you located can u swap my eg?
I’m in Victorville ca