I have a 00’ ek & wanted to do a k20a swap.. I can just buy the engine & transmission, hasport mounts, Ecu & fuel lines & it’ll be set to drop in? I was gonna get the k series level 4 afterwards
In the middle of doing a k20 swap into a eg civic engine etc in mounts on 2 Ecus wired up with the loom but there’s 1 big spare plug on the loom it fires but won’t start any ideas?
Finally someone going the extra mile and going into depth!!
Best k swap wiring for EG that I've seen thanks for the video
Best I’ve ever seen so far
When you pull in the old engine harness ( those 3 ends) do you cut them off
Thank you man. I tried to be thorough.
Greg Nembhard you talking about the old shock tower plugs?
Greg Nembhard i just pulled them through and tucked them where the ecu normally sits
Thanks v-much so is it ok the cut them out of the car
Thanks for making this video! Helped me out quite a bit with the power wires.... much appreciated man!
explained charge harness good. thanks for video
Thank you for sharing this. Two thumbs up!
your videos are very helpful!
This is why i went full fueltech and kwik wire. My alternator is one wire, no ELD
Best video out there ❤
ELD is your electronic Load Detection.
Love the tutorial. Got yourself a sub. 👌🏽
@Aaron Chaoumphonekeokiengkai Thanks for the being in-depth just find your page got your self a new subscriber here.
Nice love the video keep them coming
nice work. Keep up 🤞🏻🤞🏻
I have a 00’ ek & wanted to do a k20a swap.. I can just buy the engine & transmission, hasport mounts, Ecu & fuel lines & it’ll be set to drop in? I was gonna get the k series level 4 afterwards
iRecklessGodd 25 yea. Just make sure its not a accord or tsx transmission
hows your swap going? ive been seeing a bunch of k series for cheap, just need some more information for when i do mine
Is the oem harness pretty much plug n play? Do you have to delete/remove any plugs from it or modify anything on it?
Hello sir.
I need some help.
Where I find k20 ecu diagram.
Great video lots of info
Thank you 👍🎯
Cool channel
k24BeN thanks
Hey Aaron do you have ig ? I wanted to ask you some questions about the wiring and fuel pump thanks !
Deliciousnesses
What did you do with the old engine harness when you brought it inside the car?
I'm big fan of your videos, how much u charge to do a K20 swap on my eg d15?
Brian santana it depends whats needed to get the car finished. What parts are purchased etc
did you change the chassis harness under the dash to one from a manual one ?
Bro my fuel pump wont stop priming lol did i wire wrong?
what about wiring in the reverse light?
a bro wat state r u in ... if u in my area i pay you to help me on my kswap
In the middle of doing a k20 swap into a eg civic engine etc in mounts on 2 Ecus wired up with the loom but there’s 1 big spare plug on the loom it fires but won’t start any ideas?
Had to put headphones on to hear lol
Jonis yea i was a noob when i was making these videos.
@@ACGarage614 Haha it's all good man still good info
I planning to plant a K24A1 from a CRV manual in my Civic EK. Do you think I can use the harness for the swap?
My dude must be Lao or Thai with that last name 😅
B Series lao
Where did u pull those first 3 wires- green -red green-orange green yellow.? Not the ecu side but the other
Bud Jesus what brand harness are you running?
Ktuned tucked harness
Bud Jesus im not sure what wires you’re referring too. I only know those wires are on the ecu side. Not the driver side.
Aaron Choumphonkeokiengkai the 3 wires u connected together u said check engine light codes n something else where did u pull those wire from
Aaron Choumphonkeokiengkai send me a message on IG Budjesus88
What conversion harness did you use. K tuned or hyrid racing?
Gsr Turbo ktuned
@@ACGarage614 gotcha
i cant find that hole for 02 sensor
ok and you k swap and keep the auto transmission for this swap?
wheres the rest of the vids 2-13?
Do i use my original wire harnes? 99 ex harnes. I have a gsr swap but want to go k serious?
Angel Garcia if you go k series look for a 02-04 rsx type s harness
Does the k tuned conversion harness come with the o2 sensor connector or do you have to hardwire it in?
Gsr Turbo i believe it comes with it wired already. You will have to confirm with ktuned.
Where did you get the firewall plugs? Anyone have a link for those?
Mario R www.hondapartsnow.com/genuine/honda~plug~air~conditioner~91631-sr3-000.html
Mario R www.hondapartsnow.com/genuine/honda~grommet~washer~hose~91617-sb6-000.html
How did you wire up the coolant fan connector?
MrRevto9k dont need it if k pro is being used
Aaron Choumphonkeokiengkai
No I mean the fan motor power connector. Did you use the stock EG one?
MrRevto9k stock fan plug. Just exteneded
Harnish
Man i thought my last name was hard, you Lao?
Chris TOE Pher yes
Was this done with a oem rsx engine harness?