HOW TO: 96-00 Honda Civic D16Y7 To JDM B20B Engine Swap
Вставка
- Опубліковано 8 чер 2024
- B swap parts list for 96-00 Civics
honda-tech.com/forums/hybrid-...
IACV 3 to 2 conversion
www.hamotorsports.com/pages/3...
Wanna Send some Cool stuff????
Dana Prum
P.O BOX 21304
San Jose, Ca 95151
Follow the media!
/ efnstatic
/ staticservice
/ danaefnut
ACTION CLUTCH 10% OFF DISCOUNT CODE : STATIC
actionclutch.com/
/ actionclutch
S1 BUILT Discount code "STATIC"
/ s1built
www.s1built.com/
/ @s1built
REDZONERACE
www.redzonerace.com/hawaii-tun...
/ redzonedb8
/ redzonerace
Nomis Industries
/ nomisind
KELLYNBUILT FABRICATION
kellybuiltfabrication.bigcart...
/ dsrxkellybuilt
CJSWIRING
www.cjs-wiring.com/
/ c_zapien
MAXPEEDINGRODS DISCOUNT CODE : YSTATIC
www.maxpeedingrods.com/?track...
/ maxpeedingrods
STREET2TRACK
www.street2track.net/
BRFITTINGS
www.brfittings.com/
/ brfittings
Y&S Lexan
/ y_s_lexan - Авто та транспорт
Love seeing videos like this. Keep the younger generation and new enthusiasts interested by showing them the way
Thank you 🖤
Ek swpped b series finally lolz took me about 2 weeks to do this swap by myself lolz a lot of homework and UA-cam vids Dana Dana Dane you da man 🤙🏽
my ek swapped b20b doesnt want to stay turned on it starts strong and then dies off immediately after
@@dior9962have you checked timing your idle air control valve or any leaks in the intake system? I would also check for fuel.
Took me two weeks as well. Came down to crv p/s bracket and the passenger side axle. Otherwise I had everything else from an Ls integra 😂🎉
I'm having issues also bogging when I take off and when it's sitting and I rev sounds good any idea
A couple things I noticed which I thought I could chime in on:
In my EK B20 swap I used a 94-01 Integra shift linkage and had no issues
You can use all your stock single cam mounts so long as you use a 2 bolt post mount, make sure it's the short one!
Thanks again for the excellent video as usual Dana!
I just got a b18c1 whole swap and I have a ex shell with an hx motor. Your saying the linkage that came with the gsr will fit in my ex shell?
@@adventureswithbuna6207 Yes.
Did you keep your ac and ps
@@adventureswithbuna6207 I retained my AC with a CRV P7J AC bracket and just bolted my single cam ac compressor to that bracket. Power steering is a little more tricky
@@liamtomlin5151 steering is easy. Use si pump and b series bracket.... If it's a p75 head you can use the ek pump with crv bracket.
My son and I are building a 96 hatch. We started with the B18 swap but had a boat anchor for a motor. Got a JDM B20 and poked it in. Edelbrock intake manifold, Skunk2 Alpha header, AEM dual chamber intake. Car actually moves pretty good! Car also has every suspension bushing replaced along with various Skunk2/Meghan Racing components. Just needs body/paint although it is still presentable. I tell anyone who wants to work on a car for the first time to buy a Honda, so nice to work on and very affordable. This is the first car I've actually built from the ground up having put my dirty mitts on literally every bolt in the car. Awesome video, sorry for the rant.
What harness u used and ecu u need
can always count on static to do motor swaps great job bro
Love watching you work, been watching you for a while, you and a few other youtubers inspired me to take my CRX to the next level. stay dope!
A b20 crx is very nice…
My man I've been watching your channel for a HOT minute Not gunna lie your the reason I picked up my first honda!! much love man
First Honda? Well then welcome to the world of “will not stop modding” 😂
You the man, make it look so easy, big props man. Keep up the great work and keep the content coming 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
Always on the grind, you deserve waaaaaay more subs my dude.
Appreciate the effort and detail you put into the videos! This video is gonna help me a lot in the future for sure
Don't have a Honda, but I still enjoy watching your videos.
Wow dude, your a freakn Wizard. So dope seeing and watching you put your knowledge to work on these engines.
Nice to see Dana working on ek's
This channel deserves more attention!! 😎🖤
Super cool video. I think it’s a great idea. Going from D to B probably feels amazing power wise. Cool budget swap. Wanna get me one
Bro I love watching swap vids you make it look so damn easy man Gucci taters
was looking for this video 2 mouths ago lmfao , finished my swap a couple weeks ago , good video 👍
My first video ive seen from you. Amzing work keep it up!
Hey yo it’s the guy with the Civic with the pony decal on it when we met. I just wanna say it was awesome seeing you at Honda Acura Mornings and I can’t wait to see you in the next one when I get back from the Philippines
BTW hoping to get a B series in my Civic soon
Beautiful swap love the work u do
Dana dropping tht Honda knowledge,
If the sensor is sm00shed its bad.
Great work on the B-series swap!
Damn I've been waiting on that IACV write up!!!!!!!! THANK YOU!!!!!!!
Thank you brother, amazing video as always keep it coming
took me back in time with this one
I wanna do this with my 96 DX but had no idea where to start or what to do. This video was extremely helpful by giving me an idea of what I'll need and the work that would need to be done. Don't think I'll be able to do this since I have zero experience but at least I'm aware now, lmao.
U can do this bcuz these tutorials are so good …. Believe in yourself l!!!!
Brooo you don’t need expiernece if it’s your own car, that’ll BE the expiernece lol, go for it bro
I have the same car bro, I just got it a couple days ago & I wanna swap it to this engine but don’t know what to do.
Guess I’m a little late lol, I’m trying to buy a 96 Dx shell with only a bit of experience pray for me y’all 😂
@@XplodingMudkip I have a ex shell lmk
Mad respect bro been wanting to buy a eg again and do a swap. Like that's broo might have to take to u I'm in east San Jose much love brotha keep pushing these videos out 💯💯💯💯💯
20 minute job for dana to get out the y7 lol, thanks for this dana i saved it to look back at it when i decide to swap my 98 ek sedan
Going to do a Bswap in my Ek sedan really soon! Thank you for the info!
It sounds like the T belt is off a tooth. That’ll make it rough at idle and smooth out as you rev it.
Bro I like your videos, salute you! I have a 05 Honda Accord ex that I’m putting together, but I can’t get my steering together, I change the pump twice, and it’s still hard now I change the rack and it’s still hard, someone told he to change the pump again because it might have got burn out again!💯🇯🇲🇯🇲🇯🇲🇯🇲🇯🇲
Finally 😂 I seen a small clip come up on IG and now finally the whole video
if you follow the wires on the jumper harness, you'll see most jumper harnesses merge the a12 and a14 so that you don't have to do the iacv conversion on the ecu side. I noticed this on my harness after I did the conversion
Thank you for the video! Great job man!👍👍👍
this is great info I got a b16a2 swapped eg hatch and thinking of swapping that into a 2000 civic shell.
Dana back flexing a Lil!
I had to do a double take when I saw this Vid in my feed.. I was like, "Good Lawd, is that Static dropping a B series in an EK?!?"
Use the torque mounts on an Ek. If you don’t the driver side mount bolt holes on the frame tend to rip off if you don’t.
Love the vids brother ! I'll be doing a B20 swap in my eg hatch soon. What are you using as an engine dolly/roller??
Bro I just got into the Honda game and damn you explain it good
Wow wow wow excellent video! I love the fact that no shortcut was done so I hope this video spreads out like wildfire
Me I gotta show this to future customers or inquirers as you explain a lot and completely in less than 15minutes what I’d end up talking in redundant paragraphs 😂
Clean clean conversion “beer” bump to you man :)
You always have some knowledge for people
When I had my 05 civic Dx I did a swap with 06 civic Hx vetch plug 🔌 n play,whit no experience I ran my vetch wires from the ecu to the vetch solenoid
Great video doing the same swap very informative thank you ❤
Fantastic video best Honda channel I've ever watched hands down. I need a video exactly like this but for k to dc4 integra hopefully it happens soon 👍
but dc5 came K?
@@noobatnothing my mistake- dc4- b to k integra. Like what could be kept on harness if anything, what needs extended/changed, what needs done with shift linkage ect.
@@christophersilva2892 no problem bro. sounds like a normal k swap, new harness, new ecu, special engine mounts, shifter cables instead of solid linkage etc
yes finally, I've been waiting for this video for a long time. Greeting from Puerto Rico. your content is great and i learned a lot from everything you have done.🇵🇷🇵🇷🇵🇷
You and me both! :)
Great video 🔥
Such a great video
Awesome Video!🔥
I'm going to end up watching this video 500 times 🤣🤣 I just got an 98 ek hatch but it's an auto so I'm definitely trying to do a swap
Awesome vid bro. I have a 97 hx coupe and as soon as the current d motor in it dies, I'll be putting in a b series. I was most worried about the wire harness compatibility but this helped quite a bit. Good stuff.
It won't ever die..
@@SamslamminCars I have beat the shit out of it for years, I'm starting to think the same. Maybe one week I'll forget to fill her up with more oil. She sure likes to drink lmao
@@almightyark8403 I just swapped out an original d-series with 360k on it, with a blown timing belt. Slow but stout
Just what I needed ty
There’s also the 96-98 civic hx, they made a cvt and a 5sp under the hx trim
Gracias por todo lo que explicas 👍👍👍👍👍👍
Dope video homie
This video is awesome!
u r the fking master of Honda! thnx 4 share ur time! its awesome!
Sick Video!
Yes just what I needed 😎
Keep up the good work keep the good work I am more of see too
like what you do bro keep it up
I used a integra shift linkage and its fine
Great info bro.
NICE WORK IM ABOUT TO B20B VTEC MY 91 CRX SI WOULD LIKE A LITTLE INSIGHT SHOULD I DO OBD0 OR OBD1 THE 90-91 INTEGRA LS ECU LS TRANS THE EXPENSIVE TUCK HARNESS THE CPR COIL KIT HONDATA V3 OR S300 IM GOING TO BUILD AND BOOST A FEW TIPS ON WHATS BEST WOULD BE APPRECIATED KEEP UP THE GOOD WORK AND CONTENT 💯🍻
Awesome work
If you use the harness from the Y7 Good luck with the Idle air control valve wiring conversion its a pain in the ass converting it at the ecu and having it work properly
I've done a lot of B series swaps. You can use the D series motor mounts all of them. All you need is that t bracket and the driver side engine post mount. The Integra shift linkage works great if you get the one from a Type R it's usually gold or the GSR. It works way better than the EM1 shift linkage for sure.
@@Ahsangill19 no
All B series Transmissions have to use a B series shift linkage and all d-series transmissions have to use a D series shift linkage
@@danielstephens4420what do you do if you have vtec how do you wire that off?
@HennyManTactics what do you mean? What are you installing and what are you trying to do?
The legend 🔥🔥🔥
my hero!
What’s up man! Just wondering what jack you use to get high enough to get the clearance? I’ve got a integra gsr
When I do a swap that deep I pull the dash and do the heater core based on the age of the car and motor already out
hi, love all your videos ! how much would u charge to bswap my ek ..?
This seems like a really easy beginner swap, no VTEC means wiring is super simple too.
Damn! Wish you were in SC! Just got a completely stock 99 sedan in VA. and want to do the B20 swap.
Great video !!!!!
No shots taken cough “Troy”😂 I was dying😭
Awesome swap I'm going to a gsr swap in my 99 ek coupe, who made the header that you used in this swap
Hell yeah bro my brother is doing the same exact swap on a 96 ex coupe I, I have a question though, what parts would I need to upgrade if I can my daily 96 ex it has the 16i8 non vtec
Awesome video
Great content...👍🤙
First try!!! Hell yeah. Stat.
The good ole days. Gsr eg hatch. Crx ls swap.
I have a question in terms of a b series swap:
Im doing a b16a2 swap into a EK coupe EX. I was really hoping to keep the power steering and AC. I was just wondering what are the parts/brackets that i will need to keep both AC & Power Steering pumps to work in my swap.
its probably the secondary o2 sensor i didn't see you tucking that up anywhere which is usually the route i did leave for a few minutes tho so maybe i missed it .
Great video
That’s what I need
I wish someone would make a b swap guide with an auto trans, ac, and power steering for a daily driver grocery getter type build
Mr. Static, one question, when you did the swap did you use the same axles that were already on the car with the sohc engine?
A well of knowledge 👨🎓 📝
What brand are those engine mounts? I can verify that Hasport bushings fits like a glove on Sickspeed B swap mounts. I had Sickspeed 100A mounts on my 97 Civic with a y7 to B16 swap. I later replaced the bushing with Hasport 65A and the vibration sounds are now almost gone.
I used a 2001 integra sedan shift linkage in my 98 civic
Dam beautiful work. I know for a fact 96-98 civics have a hard time staying alive. Also fa5 civic will always be lost. Idk why but those years always develop a problem being crash or motor blow out. I think those years are cursed.
mine started knocking 😢
Great job !! I want to do the same on 91 civic where can get a list of what I need ? Thanks
Looking to do a b20 in a 2000 dx is everything the same as explained in this video ? Love the content thanks for any help/ input !
I’m doing a b18b1 what harness did u use
I did the hybrid racing front bushing and rear as well on my hybrid shifter.
Sucks bro the sold stuff Rattles
And broke my shift linkage front front mount
hello sir. did you plug the water bypass on the intake manifold side? or did you use the b18 intake manifold? i also have a b20 high comp engine and i used the stock manifold with the vacuum chamber, which stops me from installing a strut bar because of clearance issues.
going from a 97 d16y8 vtec to a 97 b20b non vtec. will the wire harnesses match? if not what's needed to make this swap happen?
So you could use a passenger side motor mount of the single cam. On the b series ?
What’s up og hope everything good 👍🏿
Got a 96 civic ex would love to do this to my car