Mitsubishi mirage belt replacement

1. Gather the necessary tools: You'll typically need a wrench, socket set, and a new belt that matches your car's specifications.
2. Locate the belt: Open the hood and identify the belt that needs to be replaced. It's usually connected to the engine components like the alternator, power steering pump, or air conditioning compressor.
3. Loosen the tension: Use a wrench or socket to loosen the tension on the belt. This will allow you to remove it more easily.
4. Remove the old belt: Slip the old belt off the pulleys, one by one, taking note of the routing pattern. It's helpful to take a picture or draw a diagram for reference later.
5. Install the new belt: Refer to your car's manual or the routing diagram you made earlier. Follow the same pattern to install the new belt onto the pulleys, making sure it's properly seated.
6. Tighten the tension: Use the wrench or socket to tighten the tension on the belt. It should have a bit of give but not be too loose or too tight.
7. Double-check everything: Give the belt a gentle tug to ensure it's securely in place. Start the engine and listen for any unusual noises or vibrations.
And that's it, You've successfully replaced your car belt.