Congrats man, they look amazing 👍👏 just wanted to thank you for all of your patience and for taking the time to teach us all of these awesome things and projects, your an amazing workshop teacher 💪 keep them coming...also thank you for the link
Love your videos man, one of the cleanest 4gtls no cap. Have you ever thought about vossens for the car? With the set up you have, it would be cleeeaann
I appreciate this video greatly, as there aren’t many people doing mod videos on the 4th-Gen TL. Your setup looks sick!!! Also, how much did the headlights set you back?
Try to get the SH-AWD model if you can man. The FWD model is still fast af for a beginner sports car tho that’s what I’ve got and it’s more than enough power to get up to 150mph and the handling is pretty good too
Where did you get the white parking bulb that replaced the amber one? I’m about to purchase these headlights using your code, but since they don’t come with any bulbs. I would like to find the white bulbs first. Or else I would be defeating my purpose of getting these headlights.
U could go single exit but if try to fabricate a way so it sould still look like a quad set up for looks but would just be really have one exit where exhaust is flowing out from
These are depo headlamps but I don’t see how water would enter the lamps. They’re so identical to OEM lamps and I didn’t see any flaws on these so far so good. They’re also DOT stamped approved
Nice bro, probably just my luck. I replaced my headlights with Depo ones, they both did leak. But the driver side got better once I sealed around it with silicone. Now only my passenger side is being a PITA. I did order the clear corners and will be baking both sides open. I hope with the Morimoto OEM grade butyl will be my permanent fix.
One thing I did notice right away was how whiter and brighter the light is compared to the original lamps I had. The cut off seems crispier too which was really nice 👍
Thanks for the informative video. How are they holding up after a month? Any moisture? Any issues with up/down, left/right aiming? My OEM lights are cracked and this seem to be a good replacement.
They are holding up really well no moisture it’s just like the stock ones. Only thing I had to do was change the aim going up since it was down too far 👍
@@GarrettMedia Appreciate the reply. Would you be able to do a quick night drive video with a wall shot of the bean pattern with low and high beams? Thank you.
Quick question. Were the high beams LeDs or you did that after the fact? I’m considering putting LED high beams, trying to get the HIGHEST light possible
Congratulations on the TL I’m running stock HID bulbs currently....your low beam bulbs should be HID bulbs but the height beams are the regular halogen bulbs. You can change those to LED bulbs.
Can you do a before and after video showing how they perform at night??? Do they actually make the lights brighter? My Acura headlights are kinda dim and I want some new brighter lights
Brooo yet another good video,use a little more lighting but besides that awesome edits and montage,people finna learn a lot from you Keep it up love you from Lil bro
Yes I do a slight condensation in the headlamps. I will be using the original headlamp cap, seals, and original corner bulb sockets. Hopefully that will fix it
@@GarrettMedia oh jeez no wonder why haha, yo I'm sitting here watching you = like yooo this dude definitely didn't just watch a UA-cam video too get that bumper off so easily by yourself haha, AND then the hids are a totally a pain in the ass but you made that shit look easy haha, and the bracket that holds the headlight in place/ yoooooo why did they make it so hard to get to these lights haha, gotta remove the damm bumper just to replace a bulb huh
Congrats man, they look amazing 👍👏 just wanted to thank you for all of your patience and for taking the time to teach us all of these awesome things and projects, your an amazing workshop teacher 💪 keep them coming...also thank you for the link
Keep up the content bro...I speak for all 4th Gen owners when I say your content is very convenient and helpful bro #TeamTL💪🏾😎
Bro your a animal with these vehicles haha you make everything look sooo easy haha, I can’t believe you did this itself jeez
Your Sooo lucky man I can’t believe they gave you these for free that’s freaking amazing
Love your videos man, one of the cleanest 4gtls no cap.
Have you ever thought about vossens for the car? With the set up you have, it would be cleeeaann
Thank you and yes bigger wheels like Vossens would look so clean hopefully I’ll run into some good deals in the future with some
I Just ordered these and I will make a video on them too. Your code knocked off 75.99! Thanks !🔥
You’re going to like them a lot 🙌
Would have saved me 50.00 if I saw your video a week earlier. Bought mines through eBay and should be here any day now.
Return it
@@Ecuador006 no biggie, was just thinking out loud or merely reflecting. Looks great on my 19 year old son 2012 TL sh-awd.
That's absolutely unbelievable = yooooo they have those too you for free to do a UA-cam video huh soooo lucky😳😍😎👌🏽🔥thank for putting the link
Awesome step-by-step video beautiful headlights man well done
Thank you for this Video, not only did I get the discount but install went perfect 👍🏼 thanks again.
Those headlights are soooo clean!!🔥
Thinking about getting a 4th gen, loved my 3rd gen
Do it bro. I've had one for 1.5 years now. It's amazing. Try to get a shawd
Enjoy every single video you do; keep the good content. I'm looking forward to changing my headlight.❤
Your headlights looks sick!
I appreciate this video greatly, as there aren’t many people doing mod videos on the 4th-Gen TL. Your setup looks sick!!!
Also, how much did the headlights set you back?
$4
Thanks for making this video planning on buying this car model for my first buy
Try to get the SH-AWD model if you can man. The FWD model is still fast af for a beginner sports car tho that’s what I’ve got and it’s more than enough power to get up to 150mph and the handling is pretty good too
Where did you get the white parking bulb that replaced the amber one? I’m about to purchase these headlights using your code, but since they don’t come with any bulbs. I would like to find the white bulbs first. Or else I would be defeating my purpose of getting these headlights.
Is the OEM assembly able to have LED bulbs retrofitted from the HID assembly or is an entire LED assembly required for white bulbs?
Jeez your TL's clean underneath haha I put my front splitter kit on and the plastic were a mess lol missing bolts everywhere haha
Those lights look soooo great huh I'm soooo jealous 🥵😳🤤😍😎🤣🤣🤣I've got clear taillight that'd look great with a set of those😍🤤
Just grabbed myself an 12 tl sh-awd. Loving this ride. What rims ate those
@@antoniotorres4325 congratulations! ua-cam.com/video/WyI5DC89C38/v-deo.htmlsi=WGbdjBBCGpewDSJO here’s my wheel set up
Great vid!
U could go single exit but if try to fabricate a way so it sould still look like a quad set up for looks but would just be really have one exit where exhaust is flowing out from
Nice looking lights!!!
Looks good man. I hate taking the bumper off on the 4th gen. You should do a dummy exhaust on one side so you get to keep the look of a dual exhaust.
Wait, so you have an LED bulb connected with a ballast for the projector section? Are ballasts needed for a led bulb? Thanks
I used the oem low beam bulb with oem ballast. Just the high beam and side marker bulbs are LED
Do you have to do any other wiring to change the TL from HID to LED ?
@@MusicxSlapz not at all. Just make sure the led turn signal and fog light led comes with resistors
I love it!
Awesome bro! I hope they don’t leak like Depo ones. Great content as always!
“Depo?”
These are depo headlamps but I don’t see how water would enter the lamps. They’re so identical to OEM lamps and I didn’t see any flaws on these so far so good. They’re also DOT stamped approved
Nice bro, probably just my luck. I replaced my headlights with Depo ones, they both did leak. But the driver side got better once I sealed around it with silicone. Now only my passenger side is being a PITA. I did order the clear corners and will be baking both sides open. I hope with the Morimoto OEM grade butyl will be my permanent fix.
Ty for ths ink, love my new tattoos
Did you get condensation inside the house my is getting condensation and I have replaced the gaskets
I haven’t had any condensation so far
Hows the cut off beam pattern on the USR light compared to factory
One thing I did notice right away was how whiter and brighter the light is compared to the original lamps I had. The cut off seems crispier too which was really nice 👍
94 bucks just for the clear diffusers, sheeshh
TL looking clean bro
looking good keep it up and awesome content you post
What led bulbs did you use for the high beam/driving lights?
There already sold out sheesh its a must have for sure
They should still have it in stock 👍
Are these DOT approved with the clear turn signal lens? I'll be using the factory amber turn signal bulb.
Thanks for the informative video. How are they holding up after a month? Any moisture? Any issues with up/down, left/right aiming? My OEM lights are cracked and this seem to be a good replacement.
They are holding up really well no moisture it’s just like the stock ones. Only thing I had to do was change the aim going up since it was down too far 👍
@@GarrettMedia Appreciate the reply. Would you be able to do a quick night drive video with a wall shot of the bean pattern with low and high beams? Thank you.
@@GarrettMedia how do you adjust?
@@NeptuneIsHere8 there’s an adjustable Phillips screw on top or the headlamps. Adjust them after you install it if needed.
Quick question. Were the high beams LeDs or you did that after the fact? I’m considering putting LED high beams, trying to get the HIGHEST light possible
Help me out please. Can you post a link to the fog light bulbs to buy? My 1012 are oem yellow and hate how that dont match the headlamps.
do you recommend i get new hid bulbs since im getting new headlights anyways?
@@yung.boi.charlie1257 all up to you. Would be a good idea to do that while you’re already therw
@@GarrettMedia yeah cause my hids are starting to yellow thanks for the response bro
Clean
Do you have an updated link to those lights? Doesn't seem to be working anymore...
I believe they’re out of stuck
how did u lower ur car a little what size is it ?
I wanna replace the turn signal to the same as yours. I can’t stand the orange👎🏽. What kind of bulbs did you buy?
Check out the description box the link is up there 👍
The catback is restrictive?
So its 2023, the link for the clear diffusers still work and are available, is this a reputable company??
USR auto is a reputable company
What do you use for high beams/ day time running?
Sativa for day time highs
Did you need to re-aim the headlights?
Yup I had to aim them right after the install since the aim was off
Garrett, I just got my TL and I’m tryna replace the halogen low beems and make them LED, which bulbs are u running? I have a 2014.
Congratulations on the TL I’m running stock HID bulbs currently....your low beam bulbs should be HID bulbs but the height beams are the regular halogen bulbs. You can change those to LED bulbs.
Firee
What K is your d2s bulb
Can you do a before and after video showing how they perform at night??? Do they actually make the lights brighter? My Acura headlights are kinda dim and I want some new brighter lights
have you got the car tuned yet?
Not yet. Coming soon though
@@GarrettMedia def will make a huge difference!!!! just got my tls tuned and it's a night and day difference
@@zachbobo6386 I heard man I can’t wait 😝
Brooo yet another good video,use a little more lighting but besides that awesome edits and montage,people finna learn a lot from you
Keep it up love you from
Lil bro
you took the plastic cover off?
Where can I get am Aspec kit for my 2012 TL....Awd tech package
Check out endlessrpm.com
Any condensation issues so far?
So far till this day no issues. I did use my oem covers maybe that’s why its been good
Any issues with condensation inside the housings?
Yes I do a slight condensation in the headlamps. I will be using the original headlamp cap, seals, and original corner bulb sockets. Hopefully that will fix it
@@GarrettMedia I was afraid of that. That's seems to always be the case with aftermarket housings.
@@GarrettMedia Did that fix the problem?
No issues at all it’s been about two years now I think
They link isn't working any help?
Damm how'd you learn how to do all this, your a beast bro
Former Honda tech 👍
@@GarrettMedia oh jeez no wonder why haha, yo I'm sitting here watching you = like yooo this dude definitely didn't just watch a UA-cam video too get that bumper off so easily by yourself haha, AND then the hids are a totally a pain in the ass but you made that shit look easy haha, and the bracket that holds the headlight in place/ yoooooo why did they make it so hard to get to these lights haha, gotta remove the damm bumper just to replace a bulb huh
Good job. Saveing this
Send me ur old tips for my tl my is a spec
Any idea when they restock 😭 sold out man
They should have them in stock 👍
would this fit on the 2014 acura TL?
Yes it would
Nice and dope
Please how can I contact you directly?
Instagram @garrett_media
already not avail a year later thats a bummer
Damn the discount code doesn’t work anymore?
Call them to see if they offer any kind of discount
How I can get those ??
Check out the description box for purchase details 👍
How much did this cost u total?
I’m sponsored by them so it was free
Can you send me those used headlights you got Leah
Anybody else who got these and can confirm projector output compared to stock?
Send me those used headlights you got Leo
they don’t make the auto headlamps anymore :(
I was wondering why I couldn’t find it!
Bro I need help
What’s wrong
When I click the link theres an error code they probably ran out smh lol
They probably did run out. I’m not seeing anymore ads from them for the 4thgenTL
Dam you can’t tell you work on these cars hahahaha
I wish I would have seen these before I bought 2 OEM headlights 🤬😡
How much and where did you get it?
Single exit looks rice imo bro
Sell me the other one Acura TL 2012
Na bro you don’t want to do that! Get a custom exhaust from you down pipes to your mufflers and go a bigger diameter too!,
Milwaukee 🤢
Remove a bumper to replace a standard bulb? Laughable! Never buy an Acura!
Thats just how modern luxury cars are
@sgt_undead2748 you can also get to the bulb behind the fender liner. Some people too lazy to replace a bulb I guess
@@sgt_undead2748 Got a 21 Porsche, don't have to remove a bumper for a basic bulb.
@@Jmp64-ns8zl some are an exception sure
Me gusta 👍