dis-assembling a slimline pen kit
Вставка
- Опубліковано 6 лют 2018
- See how to take apart a slimline pen kit and re-use all the parts to make a new pen. If you have made a pen and it has been damaged or needs some repair this video will take you step by step through the process with no special tools involved.
- Навчання та стиль
Fantastic video...I bought a set of punches after watching another of your videos....nice to know they have many uses, thanks again 😊
Awesome, thank you for sharing your video. Everyone stay safe, warm, happy and healthy. From Henrico County Virginia
You Beauty!! I have a pen, one of my first and I did not turn the end flush enough to the nib section. You can feel a slight ridge. It is a beautiful acrylic pen but I need to get the nib section off, So I can fix it. You Sir are my savior. Thank you. I did ask a friend he said you will destroy your pen trying to fix it. Thank you, thank you, thank you.
Just found this Jon. Very useful. Now to hunt down the punches and should find one easily amongst my stuff🙃🙃
Great video. I have a whole punch kit and didn't know I can take the nib out through the mechanism. Thanks :)
Glad it was helpful.
Thank You for this video. Just tried what you described and it worked out perfectly!!😊
Glad it helped!
Great video, lots on pen assembly but very few on disassembly, thanks. Keep the videos coming
Excellent video!
Thank you very much!
great video very helpful thanks
That was so informative. I have normally been able to dis-assemble most of it. Very instructive.
Thanks very informative.
Thanks for watching!
Thanks for posting I was installing my 1st pen kit an pressed in the transmission in same side as cap but dispertly wanted to save the turned part thanks again
If there was any worry about damage to the components, I'd utilize wooden dowels.
The block of wood for disassembly is a good idea - I'd make another (out of plastic or nylon) for assembly if the pen is assembled in a metal vice.
Thanks for the video. I just started turning and tried my hand at making a few pens. I wish I had seen this before I tried to disassemble the one I put together incorrectly. Very informative and helpful. I would rather not have to purchase specialized tools for each step as well.
Glad it was helpful!
Thank you, very informative 👍👍👍👍👍👍
Glad it was helpful!
thanks for the video. I have only just started to make pens so I was bound to mess it up, a guy from facebook told me about your video, its been a really big help, Thanks again :-)
Glad it was of help but I hope you don't need to use it!
to late it was because I pressed the working in to far made it so I had to come find your video, but on the plus side I managed to save the pen using your video and its lead me to your web site which you have some really cool kits on and I will be placing several orders in the near future..... thanks again :-)
Thanks Terence, making a cock-up is the best way of learning - I do it regularly!
Just happen to click on this video out of curiosity.
Nicely done video. I agree, the Satin finishes just don't look very good most of the time.
Nice one Jon, i too turned my very first pens yesterday and 2 are hideous and i now know how to disassemble them and use the kits again.. nice video and nice presentation style. I reckon i might just use your site to purchase my next set of pen kits and some other stuff. Cheers Paul
Hi Paul, if you made a mess of the tubes just turn them so all the wood comes off, clean/sand off the glue and start again - nothing wasted. You can buy spare / replacement tubes but you should rarely have to. Good luck.
Thanks Jon, just about to go into the shop to disassemble the pens, i should be able to remount on the mandrel and turn them down to a better shape... thats when i am off your site adding stuff to the basket...
I am new at this pen turning business, This is a great video thanks for the great info I hope I don't have to use it yo often.
Glad it was helpful!
Good video thank you. I think that's small black tool is to remove the cone from a live centre
Thanks John, it probably says in the instructions that I have kept so safely I can't find them! Since doing that video I have discovered transfer punch sets - even better! Jon
thanks, save me time
Why do it the hard way, use a flat washer instead of the pliers to remove the trans.
Very good John. Was considering buying transfer punch set but thought how many would you use and now I know just 2. Time to go on a hunt in the workshop. Cheers Geoff
2 for a slimline - but lots of sizes for other kits and also trimming up pen blanks on the lathe - I couldn't do without my transfer punch set - it gets regular use.
I'm trying to dismantle some pro gel pens can you do a video on how to do it
It is on my list of things to do - probably not until next year we are currently far too busy. I would suggest getting a set of engineers transfer punches and use them to disassemble. If the pen kit has any plastic parts as click pens often do they will break before they come out.😢
I had a problem with a twist mechanism having an internal piece with a spring. No way to fit a punch through it to knock it out. If you can tell me the brand that has this, please post it so that I never buy it again.. I tried using vice grips to lull out the twist mechanism and ruined it.
Sorry Steve, "slimline" pens are manufactured by a whole host of factories none of them identifiable, the parts all look the same but are usually very poorly manufactured hence we don't sell slimline pens, I would suggest you don't use the supplier you bought from ensuring you don't get the same kit. I'm afraid most people buy the kits based on their price and if you buy a cheap nasty pen kit you will end up making a pen to match.
Your second tool was a pen mandrel!!
It is a very odd one if it is - it's only 3mm with a plastic handle. Please don't tell me there are miniature pens too!
Excellent video! Been looking for a way to take these slimline pens apart for years. Thanks very much!