@@haydnstevens3108 Hi Haydn I just seen a video somewhere in London the other day where a scaffolding crew was dragging those stop oil people off the street where they were stopping traffic those people don't look right in the head when you see the things they do like gluing their hands to the Street I really dislike woke people when they screw up everyday people's lives by acting really stupid
Hey Kyle… Kyle Here! Borke would get confused when I commented on his Channel? Any way. Git my name in 1959!!! After Kyle Wrote Sr. He was a soccer player in the 50s named a son as Kyle Junior, who also played some sport I can’t remember. But anyway, again, you keep bringing stuff home like that you’re gonna get up on Squatch!
@@kylechrist I will go back and watch again 👍🏻 Get a laugh about Bork reference… I think Squatch is eye problem started when he got Borked. Remember, he got bad black eye, he borrowed a tool from Bork. When they were in jail together at ford! That’s how I said He was Borked.
Wow nice very sweet power unit unique oil pan most I've seen have been crawler pans and some even had the dash provision that have been used on lumber mills side by side with Detroit engines
Get those mag rotors re-magnetized, being this old it is probably the issue. On those cast carbs I like to give them an additional bath in evaporust after the carb cleaner, Seems to make them work much better. They also look way better as well.
Looks really clean from the inside and im sure the issue has to be timing in the pony motor. I had the impression most of the CAT pony engine carbs where all single float only, this one has double floats? It dose sound awesome and I bet it sitting in a shed has some advantages over it being exposed to the elements of mother nature. I'm sure the spear engine will provide all the things you need and the rest you can always sell to someone else.
Had one like that in our cattle feedlot to clean the pens. It had been a push Cat in a quarry and was set up with a cable lift blade off a D-8. The blade was too big and you couldn’t cut a smooth grade with it because when you lifted the blade the backend of the Cat would lift and then at a point rock back and dump a pile of dirt under the blade. But with a couple of disk blades welded on the corners of the blade for skids you could push manure all day long. If you didn’t have the timing on the pony motor just right it could kick back and the crank would break your arm..
My recollections of mag timing is; install at timing mark, anti-rotate engine one half to one full turn (depending on number of cylinders) to allow catch dogs to engage then rotate as normal to start. The catch dogs hold while winding up a sring which when released snaps the magneto to produce a hot spark. But I'm old and quite forgetful!
Diesel engines have a long history yet for being used in anything started in the twenties..... that said, their getting started up and running can be a challenge. In those days, everything was made for its intended use and so if you went for a belt for your own waistline, They measured you and then cut the leather to fit you. I could go into a long spiel of who, what and where but your already aware of most of this knowledge. I am amazed on how a diesel engine pump is designed and how they work, and all the engineering that went into making those first engines. Now days, a place called Area Diesel service does repair or fix any issue encountered on making them work again. To say how much more that area diesel service provides for anyone is just off of the charts and so if you need the proper mag for this engine, they find someone who does it or do this stuff themselves. " A honest one stop shop" and you can't find better people to take your problems to. Their youtube channel of that same name is enough to convince anyone of their talents. Another place where such issues can be repaired or find pieces and parts is C and C equipment with same name youtube channel. Clint is overworked and yet seems to find time for anyone serious about this kind of machinery is the wealth of King Solomon. No matter where located, these folks mentioned will go out of their way to help folks. That last one mentioned is a great channel for entertainment
The mag issue is just cleaning pickups , condenser n points change maybe a ground , for warming up just run the pony it blows heat in the intake as well as shared coolant , that'll warm the head that's why it was designed like this,
I sold auto parts for about 15 years. GOOD LUCK in this town, finding ANY solid core wire, bulk or otherwise, and GOOD LUCK finding spark plug terminals and boots "in stock." NAPA, once the apex example of auto parts, is a joke here locally.
@@kylechrist It definitely says CAT 1010. I had a diesel mechanic i knew look at it about 3 years ago and he said that a john deere 4 cylinder motor of that era would bolt into it. Don't know if he was right or not but I've always wondered tho.
I would do some simple Google searching of images of a JD 1010 crawler and see if that matches what you have. Caterpillar made a TEN crawler, never a 1010. Anyone can make custom decals anymore...
I have a 1937 RD-4 with a winch for a blade on it I'm keeping the dozer but I want to get ride of the winch. It a farm tractor and not a push dozer. The winch works perfectly. I don't want to take it off and have it sitting around. If you know anyone that needs it have the make me a officer.
This is huge. Discovered a quantum stove here man. Charles Darwin or Eienstien of wood stove. Normally wood stove loses 80-90% heat. It is completely possible to upgrade every wood stove 10x or 100x even 1000x. Trick is to harvest most heat out of the hottest part of the stove, put heat exchangers on basically inside the hottest part of the stove red hot, have a car radiator inside the wood stove or 10 car radiators getting completely red hot, with the ability to have fans blowing through them. Like that one time in star trek when red necked up warp drive system was hill bill figured it out. Use best heat exangers as possible out the exhaust system, should be able to harvest 99%-100 of the heat, a lot better than normal wood stove losing 80-90% heat normal heat stove.
First is get the mag repaired and pony running, it needs other adjustments done to steering clutches and main clutch, fluids changes, etc. Then it needs a good working day to really evaluate it 👍
Love those three cylinder engines. They sound so good. That engine makes an insane amount of torque at a ridiculously low RPM. You gotta love it.
They are definitely neat!
I just love to hear that old iron come to life and clank about.
As do I, thanks for watching!
One hell of a Testament to CATERPILLAR Tractor Co
Good to see another video from you Kyle 👍
Thanks Tom
I was about to write the same comment Tom 👍🏻
@@haydnstevens3108 Hi Haydn I just seen a video somewhere in London the other day where a scaffolding crew was dragging those stop oil people off the street where they were stopping traffic those people don't look right in the head when you see the things they do like gluing their hands to the Street I really dislike woke people when they screw up everyday people's lives by acting really stupid
@@tomanderson997 us Scaffs don’t take any shit mate
Hell yeah! Nice little project there...
Glad others noticed that X231 piece. Christmas present for Squatch maybe.
Nice X231 SIGN...I hope youre watching Squatch...lol...thats a good one Kyle
A crawler that will run is a huge win!
Enjoyed the video! The diesel was smoothing right out after it ran a bit!
Yes it did. The cold weather and cold engine didn't help anything but it was able to drive itself back after not running for 25 years!
Like the dig to x231
What's that?? 🤣
great job Kyle..and everybody needs a John to help..
Now that would be good to watch at spring plough day with a nice 6 bottom plough behind it.
Unfortunately I can't make spring plow day but don't worry, there will be some bigger equipment at plow days in the near future!
I hope get to one I’d love to have a go and spend time with a great croud
Nice the see the crawler out for a rip in the field! Too bad about the mag... Thanks Kyle.
The mag will get sent off and repaired hopefully fixing the no start pony issue. Thanks for watching
Good to see you reserecting another old girl love them
Not a bad old machine at all. Cheers
It's not, especially for sitting as long as it did, thanks for watching
when tractors like that came out it made life so much better for farmers
13:05 excellent, excellent content. Thank you.
Hey Kyle… Kyle Here! Borke would get confused when I commented on his Channel? Any way. Git my name in 1959!!! After Kyle Wrote Sr. He was a soccer player in the 50s named a son as Kyle Junior, who also played some sport I can’t remember. But anyway, again, you keep bringing stuff home like that you’re gonna get up on Squatch!
Squatch is already chopping at the bit to see that 5 bottom plow I just brought home in action 🤣
@@kylechrist I will go back and watch again 👍🏻 Get a laugh about Bork reference… I think Squatch is eye problem started when he got Borked. Remember, he got bad black eye, he borrowed a tool from Bork. When they were in jail together at ford! That’s how I said He was Borked.
Awesome beast! Congrats on starting it!
I used a 1939 Caterpiller D8 on a long clearing job among timber clearing land. Great old dozzer. In state of Oregon 1980s.
Another one saved , awesome, good job guys 👍
Thanks 👍
Happy New Year Kyle 0:18
X231, 😂😂😂 excellent. Lovely new machine, love the video.
Just found your channel and Subscribed. Very nice dozer.
I have a d315 power unit in my Bucyrus Erie 15b cable shovel. One of my favorite machines to run
From my understanding a lot of draglines and shovel machines used the D4400 and D315 power units, I'm glad yours treats you well!
@@kylechrist I had a 15b with a 4400 also. You’re right though. Cat and Detroit were common power units in friction machines
Wow nice very sweet power unit unique oil pan most I've seen have been crawler pans and some even had the dash provision that have been used on lumber mills side by side with Detroit engines
I'd like to have a Caterpillar powered sawmill someday, thanks Shane
Jon is something else!
How so?
So smart
really exciting to see
brings back fondest of memories…‼️
thank you stax
👊🔥🥂
🪖
Im an operator. And an old one too. Compared to the joysticks today, that thing will give you a workout
5:28 "full Nelson" love it. I wonder if others will get it.
Possibly a few haha
Always poking a little fun at Squatch!!!!
I don't know what you're talking about 🤣
Hahahaha
Get those mag rotors re-magnetized, being this old it is probably the issue. On those cast carbs I like to give them an additional bath in evaporust after the carb cleaner, Seems to make them work much better. They also look way better as well.
The mag will be sent off and repaired 👍
Looks really clean from the inside and im sure the issue has to be timing in the pony motor. I had the impression most of the CAT pony engine carbs where all single float only, this one has double floats? It dose sound awesome and I bet it sitting in a shed has some advantages over it being exposed to the elements of mother nature. I'm sure the spear engine will provide all the things you need and the rest you can always sell to someone else.
Merry Christmas and Happy New Year to you and your family Kyle!
My D7 pony motor carb was cleaned and washed with muraitc acid then baking soda washed
Had one like that in our cattle feedlot to clean the pens. It had been a push Cat in a quarry and was set up with a cable lift blade off a D-8. The blade was too big and you couldn’t cut a smooth grade with it because when you lifted the blade the backend of the Cat would lift and then at a point rock back and dump a pile of dirt under the blade. But with a couple of disk blades welded on the corners of the blade for skids you could push manure all day long.
If you didn’t have the timing on the pony motor just right it could kick back and the crank would break your arm..
Thank you for putting your time and effort into these old machines and sharing them with us!
Good tosee another video fro you kyle bro 😊
I miss your videos. Are you coming back?
Its Great to see the Internals looking like the day they left the factory !! Phenomenal somehow
A tug start in the dirt is always a good time. Sounded ok to me from the UK. Cheers
its so cute.......do they make one for adults?
My recollections of mag timing is; install at timing mark, anti-rotate engine one half to one full turn (depending on number of cylinders) to allow catch dogs to engage then rotate as normal to start. The catch dogs hold while winding up a sring which when released snaps the magneto to produce a hot spark. But I'm old and quite forgetful!
D6 Looks just Great as it is - think it might be a shame to Renovate it as it looks like its still a Prime mover working Tractor !!
Sweet!! Runs smooth and fast for an 80 year old Lady 😎🤠
Yes it does!
My Dad retrofitted a John Deere two cylinder mag to work on ours.
“What happened, John.” “I don’t want to talk about it , Kyle”. LMAO !
Great machines. I had one of these many years ago. The only difference I can remember is that mine was an RD6, 1935??
Love the video love these cat videos
Thanks for watching
I saw X231, looks like Squatch253 was there.
I bet the identifier on the seat pan caused Squatch to let out a guffaw!
Subtle Kyle....sooo subtle! 😂
Oops 🤣
@@kylechrist You know that's a game he could play as well...Cough cough...RD-4 👈🤷♂
Thanks for sharing
Thanks for watching Geoff
Hey X231 I think 🤔 that a yellow thing a sasquatch has 🤪
Maybe 🤣
My d6 #2H8575 has those same steering clutch lever extenders on it. Was that a factory option?
Diesel engines have a long history yet for being used in anything started in the twenties..... that said, their getting started up and running can be a challenge. In those days, everything was made for its intended use and so if you went for a belt for your own waistline, They measured you and then cut the leather to fit you. I could go into a long spiel of who, what and where but your already aware of most of this knowledge. I am amazed on how a diesel engine pump is designed and how they work, and all the engineering that went into making those first engines. Now days, a place called Area Diesel service does repair or fix any issue encountered on making them work again. To say how much more that area diesel service provides for anyone is just off of the charts and so if you need the proper mag for this engine, they find someone who does it or do this stuff themselves. " A honest one stop shop" and you can't find better people to take your problems to. Their youtube channel of that same name is enough to convince anyone of their talents. Another place where such issues can be repaired or find pieces and parts is C and C equipment with same name youtube channel. Clint is overworked and yet seems to find time for anyone serious about this kind of machinery is the wealth of King Solomon. No matter where located, these folks mentioned will go out of their way to help folks. That last one mentioned is a great channel for entertainment
Going well which is good.
The mag issue is just cleaning pickups , condenser n points change maybe a ground , for warming up just run the pony it blows heat in the intake as well as shared coolant , that'll warm the head that's why it was designed like this,
Mag had a bad coil 👍
Hi Kyle, is there going to be anymore restoration videos on the Cat D4 you were involved in some time ago?
Yes, that's a project I need to get back to!
I had 2 of them,--- both were 1936 2H models.
Paint the inside of the cast carb bowl with fuel tank sealer to prevent corrosion
Old iron rescued. Nice vid Kyle.
The mega stove keeping the shop warm like you expected?
Good video
Тнвд очень смешной со снятой крышкой😊
Just checking in, everything ok?
Yes, just been busy with work and life. Hope to get back to videos soon, thanks for checking in!
Hell yeh it’ll start!!
Use some pb blaster on them stuff .
When Squatch gets burned out on X231, again, think maybe if we keep at it we can get him on the……………..ROCK CRUSHER!!!!
I sold auto parts for about 15 years. GOOD LUCK in this town, finding ANY solid core wire, bulk or otherwise, and GOOD LUCK finding spark plug terminals and boots "in stock." NAPA, once the apex example of auto parts, is a joke here locally.
X231?!
What's that?? 🤣
What's x231 haha
Isn't that an rd6 I thought only the rd6 and the rd7 were built with the 3 cylinder engines
Diesel Thirty Five, Diesel Forty, RD-6, and early D6 were all 3 cylinder diesels. RD-7 is a 4 cylinder
I remember the time my dad found out that International made different final drive ratios in a TD-9.
Did it go in cirkles afterwards?
It certainly did. Better not fall off.@@erik_dk842
Wait, you talk crap about the previous fuel line and then wrap the new rubber line in a loop around the exhaust manifold?
100%
Looking at the injector pump,I thought i t is four cylimder!
I need a diesel engine for my CAT 1010 dozer. I bought it with a thrown rod through the side of the block. Anyone know of one i can get? 4 cylinder.
@wchitwood65 I have no knowledge of a Caterpillar 1010 ever being produced. John deere made a 1010 crawler, though
@@kylechrist It definitely says CAT 1010. I had a diesel mechanic i knew look at it about 3 years ago and he said that a john deere 4 cylinder motor of that era would bolt into it. Don't know if he was right or not but I've always wondered tho.
I would do some simple Google searching of images of a JD 1010 crawler and see if that matches what you have. Caterpillar made a TEN crawler, never a 1010. Anyone can make custom decals anymore...
@@kylechrist i have pictures
That the frist i seen. A 3cinder cat engine . Plus. I thought all cats was diesel ⛽️
why you guys din'twait till midnight to do that!!!!!
In the worst scenario, restoring earthmoving equipments, grounds upwards , will cost 50%of the price of a brand new unit.
The worst thing with CAT engines is the fuel injection system. Replacing it with electronic fuel system would, definitely, solve the problem.
On an 85 year old machine?
I have a 1937 RD-4 with a winch for a blade on it I'm keeping the dozer but I want to get ride of the winch. It a farm tractor and not a push dozer. The winch works perfectly. I don't want to take it off and have it sitting around. If you know anyone that needs it have the make me a officer.
Where are you located? Thanks
@@kylechrist libby Montana
@@Rob-n3h7d I'm in southeastern South Dakota, I don't know what ot would cost to freight something like that 🤔
Fill the power unit up with diesel . Let it sit .it will unstuck.
George Carlin ~ “Get your shit away from my stuff “.
🤣
Marvel mystery oil in fuel and oil lubricant everything
This is huge. Discovered a quantum stove here man. Charles Darwin or Eienstien of wood stove. Normally wood stove loses 80-90% heat. It is completely possible to upgrade every wood stove 10x or 100x even 1000x. Trick is to harvest most heat out of the hottest part of the stove, put heat exchangers on basically inside the hottest part of the stove red hot, have a car radiator inside the wood stove or 10 car radiators getting completely red hot, with the ability to have fans blowing through them. Like that one time in star trek when red necked up warp drive system was hill bill figured it out. Use best heat exangers as possible out the exhaust system, should be able to harvest 99%-100 of the heat, a lot better than normal wood stove losing 80-90% heat normal heat stove.
Pretty nice looking 6. Seems to be very complete. What’s the plan for this one? 🥸👍👀🔧😆✅
First is get the mag repaired and pony running, it needs other adjustments done to steering clutches and main clutch, fluids changes, etc. Then it needs a good working day to really evaluate it 👍