My SCX10II Gets a Mojave 2 Body! (LEAF SPRING CONVERSION PT 2)
Вставка
- Опубліковано 22 лип 2024
- Welcome to part 2 of my Axial SCX10ii RC4WD leaf spring conversion! In this video, I share how I fit an RC4WD Mojave II 4-door hard body on the SCX10ii chassis with custom mounts, install Xtra Speed cantilever rear shocks (no cutting the bed!!), install a full MyTrickRC light kit, and add some scale accessories and details. I also add up all the scale points I'd get if I were competing using the SORRCA rules. Next - I trail test it!! Stay tuned for part 3....
Part 1: SCX10ii Leaf Spring Conversion (& my Jeep turns into a Truck!): • SCX10ii Leaf Spring Co...
Part 3: How does it perform?! Trail Running my SCX10ii Leaf Spring Conversion (Pt. 3) • How does it perform?! ...
*******************************************
SUPPORT MY CHANNEL
Become a Patron: / rcgirl
CONNECT WITH ME
On Instagram: @RC_girl / rc_girl
On Facebook: / thercgirl
Vinyl RC GIRL decals: www.etsy.com/shop/the...
RC Girl Tees: teespring.com/stores/rc-girl-merch
*******************************************
SORRCA 2020 Rules: www.sorrca.com/rules/2020rules...
ITEMS IN THIS VIDEO
RC4WD Leaf Spring Conversion Kit: bit.ly/38vCQJy
RC4WD Mojave II 4-door hardbody (fits 12.3" wheelbase): bit.ly/35MgpnT
Axial SCX10ii Cherokee XJ Kit: amzn.to/2xbUQIi
MyTrickRC UF-7 Lighting controller: www.mytrickrc.com/shop/uf-7c-...
LED Headlights: bit.ly/2OqGj6P
Xtra Speed Cantilever shocks: bit.ly/2vP4N0N
RC4WD Roll Bar Rack: bit.ly/3b8UZyR
RC4WD Toyota Decals: bit.ly/2SewKXu
Proline Scale Accessories: www.prolineracing.com/accesso...
Traxxas 3628 Receiver box: amzn.to/374xiEV
Bucket - Scale by Chris: bit.ly/2Ou6zLo
Tamiya TS-78 Field Gray spray paint: amzn.to/37j6AZP
RC4WD Onyx 1.9 beadlocks: bit.ly/2jLBKWd
Pro-Line Racing BFG Mud Terrains, Predator (1.9"/4.19"): bit.ly/2sLMvfI
ELECTRONICS
Tekin RX4 ESC: bit.ly/2ICG2sM
Tekin Roc412 motor: bit.ly/2XWQwM7
Gens Ace Adventure 5000mAh 2s lipo: bit.ly/2jMAzpt
PowerHobby 729MBL high voltage waterproof servo: amzn.to/2ulQCzN
MOJAVE II 4-door MOUNTS FOR SCX10II
DinkyRC: bit.ly/2RhDEvK
ShrinkRC body mounts: bit.ly/2UqfAcc
ShrinkRC bed mounts: bit.ly/2UrMyJ2
XTRONIC 3020 SOLDERING IRON: amzn.to/374Gd9n
MY OTHER AXIAL SCX10II BUILD SERIES VIDS
Vinyl Body Wrap: • HOW TO VINYL WRAP YOUR...
Set-up Tips & Upgrades: • SCX10ii Cherokee XJ Ax...
Lighting Kit Install: • BRIGHTEST Light Kit fo...
Winch Install: • Control a scale winch ...
Music: "We Are Unshakable" - Christian Andersen
Music from Epidemic Sound: www.epidemicsound.com/referral/oe4bav/
#SCX10ii #LeafSpringConversion #RC4WD
*******************************************
MY UA-cam FILMING GEAR: amzn.to/2yJE2wd
UA-cam BACKGROUND MUSIC: Epidemic sound - www.epidemicsound.com/referra... - Наука та технологія
The truck is awesome! But oh girl..The struggle, The struggle girl.! But Cha Made it through! Praise Be!
Love it. Reminds me of my first truck. In 1995 I had a 1983 Toyota 22r. Just finished adding the lift and new steering servo on my trx4 bronco. You doll are awesome.
WOW. You did an incredible job on that rig. It's super clean. Can't wait to hear and see how it performs. Thanks for the videos.
Looks awesome! 10 extra points for not giving up! 👍👍👍👍👍😀
Oh wow that's a really slick looking truck. Nice build young Lady!
It sure is an awesome looking truck!!
Love all the details, so scaled!!! 👊🏼😍👍🏼
I love how there’s so many aftermarket mods and stuff for rc cars. You wouldn’t expect that for rc planes til up at a certain margin. Makes this fun!
Love the rig and can't wait to see you take it out on the trails for a complete test. Hope it handles as good as it looks, it looks amazing! Way to go RCGIRL U ROCK!!!
Good job, it looks awesome. Congrats on the work done. I love the accessories on the back
Very sweet build. I love the Toyota bodies. Also, your color choice is one of my favorite....green. My toyota is army green.
Super video. Beautiful rig. 🙂
Wow I mean WOW!!! That really looks awesome. Great work. I cant wait for PT.3
Awesome project. Dig that color. So many ideas for my next build.
Read your bio; so cool that you're a fellow science nerd as well as a fellow R/C nerd! Love the leaf springs, they give me nostalgia goosebumps for the days of my trusty Tamiya Bruiser i had as a teenager....which they now are remaking!
Great looking truck. I love the color and the four-door body.
Love the color , almost the same as my Land Rover 90 , I found using the stick on alloy wheel lead weights for balancing tyres good to stick on under my body, it got the leaf springs working a lot more once the body weight was up . A roof rack would look awesome on that. Great build so far 👍
Yeah super cool, great job on the class one truck !! I love it. Really digging on the paint color. Love your videos, i'll be watching more .
Wow what a great job you did, CONGRATS !!!
I have an SSD TKP which is an scx10 frame. I put the blazer body on it. Ordered front links for the rear. I did cut my body for the shocks because they are awesome. I have the same iron! It’s awesome 😊
Nice build! I really don't have any suggestions! You got this!
Something a lot of us that have Trailfinders do for quick body removal is replace the mounting screws with grub style ones then just stretch the body over them. quick easy mod and it makes living with a hardbody much easier.
Awesome looking rigs well done on the build and the colour is lovely.
RC Gril your Toyota looks really really good! Nice and clean and your setup for the back end is a winner in my books and I hope that it works as good as it looks out on the trails.
Wow that turned out really awesome you did a Grate job well done . Thanks allso for the links I'm going to need the decal sheet for my 2 door mojave and some of the other links will be handy as well . Cool thanks again for this awesome post. Cheers!
I like the color. Olive darb is my favorite color or similar green like this truck. Can't wait to see it in action
Great job on your conversion. You've inspired me to do the same with my jeep. I'll keep the jeep body though. I suggest use use magnets for your body rather than screws. With magnet, you can also wire your lights to them so there is no wiring cable from the body to the chassis.
Hi RC Girl that completed model looks great an the suspension loveing it all that you have done looks great job done looking forward to next vlog nice one RC Girl 👍👍🤗🤗
Cool build and details about Sorcca
I wish we had those kind of accessories in South Africa, maybe I am just looking at the wrong Hobby Stores, AWESOME BUILD
Weeeee coming home from work, and there is a new video! Made my day.
😎🤙🤘the🎨job is sick,love the accessories😎🤘🤙
Looks awesome. I put long grub screws in the body mount holes. Then you can flex the body to remove it .
for securing the body to the body mount, I use set screws the same size of the body mounting screws and leave roughly 3/16 protruding then put the body on aligning the protruding set screws with the body mount holes. Makes removing the body a lot faster and tool less.
Glad to see you again
Truck looks awesome , the color especially 👍
I use 20mm grub screws that I set flush with the body on my TF2. It holds the body well and you just pull the body outward and lift it off. No tools required. Hope this helps, Steve.
Really loving the scale builds. Looks great.
If you install set screws in place of the body mounting screws you can mount/dismount the body by stretching it outward a little. The two black screws on the sides help hold on the bed. I mount my TF2 lwb body this way and can lift the truck by the roll bar! I have the same roll bar, btw!
Truck looks awesome! The leaf springs are really cool
Your truck looks great, You can be proud.
it is so cool, good job, nice scale Crawler 👍👍👍😎
Going to Leaf Spring suspension is the coolest ! 👍
I'm loving the look of it👍☺great job Hayley!
I'm a huge fan of leaf springs. More technical driving required. Good job, ma'am. 🖖
That paint job looks great! I really like the flat paint.
Been watching you a few years and can’t believe other women are not doing what you do. It’s brilliant and hope all is well.
Reeeeeeeefreshing!!!. How is it that I learnt more from watching 3 of your videos than I have done watching dozens of others. Just great content put across really well and it's not clicky.. Like I said at the beginning refreshing!.. And good work. Don't tell me you play the guitar aswell as rc and mountain biking?!?! 😮😮😁👍🏻
I use longer, smaller diameter screws going through the body and kept in place with nylock nuts. The screws become "posts" that will slip into the holes of the mount so you never screw or unscrew anything again. Just pull outward on the sides of the body to put it on or pull it off. You can even fill in the holes to hide the screw heads or cover the lower parts with scale diamond plate. : )
Beautiful work!! Everything on it looks great. 👍
Really an amazing job! Looks awesome!!! Can't wait till you take it to an event!
Awesome RC Girl I watched all the videos don from Nebraska great job
Truck Looks awesome, you did a great job.
Nice looking truck, can't wait to see how it drives👍👍
Beautiful job on the build.
Really nice truck! Good work!
I really really like this build. It is going to look amazing with a year's worth of rock rash. Next would be to start fabricating some custom bumpers and minimal cagework. That said this truck kicks ass
that is a great looking truck and you did an amazing job on the over all build; the color is great, decals fit in great and i just really like the way it looks. You are very talented and really would like to have a truck like that some day.
What a cool truck!👍😎
Dude you're builds are amazing.
Really nicely done!
Great JOB Haley 👍
Nice looking truck for sure.
Hello from France, very nice Hi Lux. Really good job !!!👍😎✌
Muy bonito Crawler!! Gracias por sus videos, espero poder tener en breve mi pickup para mi Chanel
Lot of work! Looks great! Im work on mine but i use hpi venture and body fits very well. Allowa me to use interiors.
That turned out awesome! Well done !
Glad you didn’t cut the bed! Looks way better!
Great Job RC Girl, Thank you for those awesome videos.
That turned out beautiful, excellent work 👏👏👏
This build help me decide on the type and style of my very first RC. Love the style of scale crawlers.
Patiently waiting for my kit to arrive.
Oh awesome!!! What did you get?
RC Girl - I’m going with the LC70 body and the BRX01 chassis. Tons of upgrades have already been ordered.
Wow good job that is one awesome looking rig. So scale
You can use long Grub screws or cut just the head off existing screws then just flex body on to screws and wala easy secure quick body mount.
To move the axle back a bit, try using TF2 leaf springs. They’re a little bit longer and would move the axle back a little. Also check out the BowhouseRC motor reverse kit and front better tray. Their motor reverse kit offers a front brace to support the transmission a little more. The trucks looking killer though. Look forward to a running video.
Truck looks great and great video 👍
Try using grub screws instead of screwing the body on n off u can just stretch the body over the grub screws i use the same set up on my trailfinder 2. Great job the truck looks amazing 👍👍
gorgeous build
That is so sweet, you did an awesome job !!! Wish i had some extra money to do that.
The rear and front side lights look so awesome!#😊 and the execution of the paint job is a1, I may have gone with a brighter colour 🤔 p.s I test flew my delta ray one for the 1st time today 😊 I was so scared. Lolz😊👍❤
Nicely done.👍
Nice conversion. Good work
Keep up the good work very well done.
It is a really nice looking truck.
You could still do a magnet mount with the body and mounts you used.
You would have to do some cutting, but pretty much where your screws are, get some 4mm magnets and have them line up so your body snaps in place when it gets close.
Just make sure you use strong ones so you don't hit a big bump and have the body fall off.
Use the same screw holes for mounting the body only use grub screws. Then just slide the body over the grub screws. It’s pretty easy to take the body on and off. That’s how I have my Mojave’s body mounted.
This is an awesome build I love it great job
Looks great! What about yellowing out your fogs? 3m makes a protective film you can cut and see if you like it. Us Subaru guys with Outbacks like it because rocks kill our 4.5” fogs
Very nice done 👍👍
Indicator lights are nice, if you've got a separate channel for them. An auto-off, when steering ist straight again would be dope, but all electronics kits I know about have dumb disco modes instead.
Sick truck! Now im inspired 😍 Great job!
Once again, great video. Now let's see you shred on that guitar.
Awesome little truck 😍😎❤️ RC Girl 👍👍👍👍👍👍😃❤️
Truck looks great, as do you! :) I haven't followed your channel for a while because you seemed to have gotten away from R/C aircraft, which is my real love.
Nice!! Good luck out there.
Nice looking rig!
Very awesome body shell
Awesome got her looking awesome great job 👍
nice job, it really looks cool and scale!
Hello Rc Girl! 🙋♂️ I'm a new Subscriber and Job well done. Sad to say I'm a bit jealous🤦♂️ would love to buy a scale rig.All in time as for your temporary solution you made it work now order those fender flares from RC4WD. That will finish the look for sure.Take care 👍
That looks amazing
Looks good! Would love to see a video of it on some trails.👍
Looks sweet nicely done 😁👍👍
And it looks amazing great job