F Class Products AutoDod IDOD to Neck Turn Brass
Вставка
- Опубліковано 29 вер 2023
- Find it here www.fclassproducts.com/autodod
Join Patreon / fclassjohn for full length videos, live chats and more.
Help support my channel by shopping Amazon amzn.to/35YA4h8
DISCLAIMER: This and all videos on my channel are not meant or intended to be viewed by anyone under the age of 18. This video and description may contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. As an Amazon Associate, I earn from qualifying purchases. This helps support the channel and allows us to continue to make videos like this. Thank you for the support! Videos on this channel are for informative, and entertainment purposes only. Using any of the information is at the risk of the individual using the information. We (including UA-cam) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. By viewing or flagging this video you are acknowledging the above. #fclassjohn #reloading - Спорт
I just purchased hundreds and hundreds of Lapua brass. I will cry myself to sleep tonight knowing that I dont have a friend with one of these.
A thanks to all, john,Erik, speedy and many more for sharing all of this info with all of us shooters that may never hear of these pieces of equipment
And what did I win off the prize table at Southwest Nationals? A complete loaded AutoDod. Thank you F Class Products. Damn excited to use this for turning my brass. Will be using this video to assist in setting it up.
That’s freaking amazing!!! Congrats and I’m sure you’re gonna love that thing!!
As always great job John, thank you
I've had my Autodod for a few months now and for the first time in my short reloading life I'm looking forward to turning necks
That is a very nice piece of machinery. I have been wanting to get that for awhile, and I will soon😊. Great review John. Oh, it is a crochet hook according to my wife. 🤣
Thanks for taking the time to do the deep dive this tool deserves, John. This is an expensive piece of kit and most folks contemplating it will find your video enormously helpful.
One thing... I noticed when you were taking neck thickness measurements with your micrometer that you only took 1-2 measurements, very close together. The true test of a neck turning process is how precise and how concentric the resulting case neck is. If you were to measure your case neck, rotate the case just a smidge, take another measurement, rotate another smidge, take another measurement, etc., etc.... until you've captured 10-12 measurements around the entire case neck circumference, you'd be able to see what the minimum and maximum neck thicknesses are. The obvious desire is to have zero variance, to have a dead-even thickness all around the neck. Producing that requires a dead-straight case neck before you begin, however. And then a tool/process which maintains that. That's the rub.
If you decide to do that, to make those kind of measurements of brass coming out of the IDOD/ADOD, I'd love to hear your results.
This is your best review yet John, very comprehensive and beautifully done. 👍
Thank you John for use my 🔺Delta No OIL Lube🇮🇹 …. I really appreciate 🍷👌
For better use and less waste you can use a simple plastic cap to wet the neck since IDOT works on both the outside and the inside and leave to dry upside down without washing. Once dry you will find a constant closure of the ammunition with a very low SD.
Sandro.
it is the reason to use the IDOD 😂, you're convinced that you have invented even the hot water ??
@@user-ws7us5me4s
Thank u’ so much… Hot water is cheap, maybe you don't have the money to buy Lube. You can use canned tuna oil…😂😂😂
This is a great video sir thanks for the stuff you put out
We love ya John have at it!
We love the info
Love my Autodod..
Just ordered mine😊
@F-Class John, great overview of the AUTODOD. I'm glad to see you finally got one. The T Handle is a nice new addition. I got mine in 2022 and it only had the hex wrench.
It would be great to see your next brass prep and loading steps after turning. Do you Neck size ect. ect? What neck tension do you apply?
I've done all kinds of experiments including AMP Annealing after turning. It's really interesting to see how smooth the curves are when using the AMP Press after using the AUTODOD.
It's bad ass, I just received mine
I need one!!!!
I'm on this product, next purchase, just ordered my amp press
this cool
Very Interesting , Great Video 💯💥💥💥💥💥💥💥💥💥💥💥💥💥💥
next step - 3d printer for printing brass ;)
Hey John thanks for the video. Very interesting. Did you have to use special die on brass to get neck concentric before using the IDOD? Appreciate it.
Nope, just shoot it and turn is what they recommend. That's about the straightest the brass will get. You're actually more likely to run into problems if you try running brass through a die before turning.
Sweet machine,but,it sounds like the motor bearings are a bit " sloppy" ? Have you ever taken a dial indicator and checked the runout on your 5C collet assembly. This will affect how true your neck remains to the cartridge wall. Just wondering??
Would this machine remove or lessen the donut inside the case?
Hi John,, question time! After neck turning, the inside dia of the neck is obviously too big for a bullet, so how do you get it back to the correct size [2-3 thou less than bullet dia] Do you then use a bushing sizing die, or some other method.?
Yes that's correct. After turning I'll then run them through my sizing die and continue brass prep as usual.
So the dial is not how fast it moves in rapid but how far it moves in rapid. That was a little confusing at first.
🤘🏻
the cnc controller is just to throw away your money for nothing, manualy you can do the same job, i did now thousands of pieces from 223 up 30 without this toy 😂
WOW! Just $2700.00. Must be nice to have some excess cash or have someone give you the product to use and evaluate. Wonder if the improvement in accuracy will actually allow you to win back the money spent?
Somebody woke up on the wrong side of the bed this morning.
Aereaux - I don’t think many people shoot to “win back the money” (which is spent on equipment).
Jealous much?