Thanks so much for this video. This is my first gun and I was so dissapointed when the bb's were reaching for the stars! Thanks to you got it sorted in no time and it now shoots like a dream!
Thanks for this video. It's nearly perfect. It helped me install a conversion kit with absolutely no trouble. It's a shame you didn't have the allen wrench to disassemble the hopup, but I figured it out. Thank you again!
there is one small pin near that back of the bolt as well as two long phillips-screws near the front of the nozel that hold it in. after you remove the pin and screws, it should just slide right out. the trick is getting the new one back in there ;)
Green gas/propane bottles must be inverted whenever you're filling a gas mag. To put it simple, hold the mag upside down so the fill valve is facing up. Then fill it with green gas or whatever you're using.
I have a whole list of videos (reviews, shooting, maintenance) that I need to make, i'll add this one to it. Also, I believe airsoftgi sells the g39E with the upgraded nozzle preinstalled. It's only a few inches longer than the K model and it has a bipod. Not trying to change your mind, everyone has their preferences, I just wanted to provide some insight.
It was an informative video, too bad they don't make videos any more, the channel had potential. I've just bought one of these bad boys and looks good, the presented issues were minimal.
Man I just got my used G39c and I turned the hop up all the way up and down it was the same I went on an airsoft field I was not hitting players and this video saved me than you
i've been airsofting for years and i have had over 60 guns in the past. I cant figure out how to take that frickin flash hider off either. I haven't played with it much yet, but i brought it to an airsoft shop and they said they have never seen anything like that and they don't have a clue. great.
Im having the same problem right bow as we speak, I have the gun sitting in my lap and im trying to figure out how to remove that freaking flash hider. There is a ring inside it, but i have no idea how to get it out. So weird. I need helllppp
@juanecheyt Thanks for helping him out. I've removed flash hiders before but I didn't know if this one was different so I didn't want to give any false information.
hello i got the same rifle and i have some problems.I will be happy if you could help me .After few shots (even with full mag with full gas) it stops feeding bb's in so when i press the trigger just gas blows out and after some try it releases all the gas inside the magazine out. I tried it with 2 diffrent magazines and i get the same result. Thanks for the video i will clean and oil all the parts and try again soon .If you have any solution for this please share with me. Thanks !
It sounds like you have one of those H&K dual power guns. Is this true? If this is the case, then I hate to tell you but those guns aren't made to last. I'm pretty sure there is no way to upgrade them, either. On the other hand, your problem is either the motor or the the battery. The motor could be screwed in too tight, and there should be an adjuster underneath the grip. Or it's the battery. I know you said you charged it, but it could just be a dead battery and may never fully charge.
Ah yes. That part can get stuck. It's a little difficult to explain but you have to pull it out so it's on an angle. Doing so will not break it, it's made to do this. Once you have it on an angle, push down and it should come out. Don't worry about breaking it, this gun is built like a tank.
Hi there awsome video i have a question 'cuz my replica shoots to hot its a RAS version. Did you ever managed to stabilize the shoot power, on mine the first shoot was 2.0joules and after turning npas all the way down it shoot 1.1 joules then had jumps to 1.78 joules in 5 shoots
Hey I just bought this and well I load exactly 30 round into a mag fill it up with the green gass and well it fires 7 rounds and the mag gas supply is emty I have 4 mags total and ive tried it with each one to same result so im wondering if its either the bbs are to small and is letting more gas escape then it should when fire or if its something to do with the gun im using stealth 0.25g bbs
I'm not sure if this a minor issue, but when I try to shoot my G36, it makes a faint electric sound once and doesn't shoot, anything out at all(even after I fully charge it). It wont make any sound after I shoot it semi auto or full. It only works when I cock it and shoot. I know its an electrical problem, but do you have any solutions?
I haven't used it in a while, but yes it still works. If you can find one at a good price, yes I recommend it. If I used this gun a lot, I would consider upgrading the bolt and trigger assembly to steel parts.
Hi there, I am writting from team profile so do not be confused :) I have this darling for 4 years, so it's an amazing gun, BUT the full-auto never really worked for me. I tried new mags, replaced internals with RA-TECH, but nothing. Do You have any recomendations? And for that guy about needing to cock on semi and then switch to auto, yes, I have the same problem - it gets stuck when cocked on auto, the hammer goes too deep and the f*ck locks on that bridge (or whatever it is)
umm, just wondering how to remove the charging handle from the front of the bolt because mine snapped off and there is a tiny alloy pin holding it in... same as usual i dont want to break it so could someone help me, i need to remove that alloy pin!!!
I still can't remove the part at 3:00 and I've been pushing it everywhere for over 10 minutes. Looks like it has a small plastic flap which doesn't let it go out. I don't want to break it, but I really want to learn how to clean and lubricate it before it's too late, so if someone could help me a bit... :) Thanks for the video anyway
I just found out that it was the motor. Smoke was coming out of the back of the gun when i held the trigger. I'll just throw this airsoft gun one away... :l Well thanks for the help, Subscribed :P
umm, just wondering how to remove the charging handle from the front of the bolt because mine snapped off and there is a tiny alloy pin holding it in... same as usual i dont want to break it so could someone help me, i need to remove that alloy pin!!!
![Airsoft Review #112 WE G39C GBBR (G36C) (GUNS AND TARGETS) [FR]](http://i.ytimg.com/vi/aoXepiCaHQE/mqdefault.jpg)
![Airsoft Review #112 WE G39C GBBR (G36C) (GUNS AND TARGETS) [FR]](/img/tr.png)
Thanks so much for this video. This is my first gun and I was so dissapointed when the bb's were reaching for the stars! Thanks to you got it sorted in no time and it now shoots like a dream!
Thanks for this video. It's nearly perfect. It helped me install a conversion kit with absolutely no trouble. It's a shame you didn't have the allen wrench to disassemble the hopup, but I figured it out. Thank you again!
Thanks! Glad it helped you out. If there's anything else you'd like to see about this rifle, just let me know.
I believe there is a pin or two on the bolt which hold in the nozzle. I have not tried to remove it, though.
there is one small pin near that back of the bolt as well as two long phillips-screws near the front of the nozel that hold it in. after you remove the pin and screws, it should just slide right out. the trick is getting the new one back in there ;)
Green gas/propane bottles must be inverted whenever you're filling a gas mag. To put it simple, hold the mag upside down so the fill valve is facing up. Then fill it with green gas or whatever you're using.
How do you take off the orange flashider? Could you make a video on it?
Same question. Did you figure it out?
Glad I could be of help.
I have a whole list of videos (reviews, shooting, maintenance) that I need to make, i'll add this one to it. Also, I believe airsoftgi sells the g39E with the upgraded nozzle preinstalled. It's only a few inches longer than the K model and it has a bipod. Not trying to change your mind, everyone has their preferences, I just wanted to provide some insight.
Thanks video from 8 years ago
wow, you explained this very well thanks, now i have a better understanding of how to lubricate my gun.
Can you only take out the inner barrel so u can change the hop up? Or do you have to disamble everything to get to it?
It was an informative video, too bad they don't make videos any more, the channel had potential.
I've just bought one of these bad boys and looks good, the presented issues were minimal.
Man I just got my used G39c and I turned the hop up all the way up and down it was the same I went on an airsoft field I was not hitting players and this video saved me than you
Awesome video, very informative. I have question, is the flash hider removable?
Same question. Did you figure it out?
@@oskarsupenieks1027 Yes it is , has a counter clockwise thread so anti clockwise to undo
i've been airsofting for years and i have had over 60 guns in the past. I cant figure out how to take that frickin flash hider off either. I haven't played with it much yet, but i brought it to an airsoft shop and they said they have never seen anything like that and they don't have a clue. great.
Im having the same problem right bow as we speak, I have the gun sitting in my lap and im trying to figure out how to remove that freaking flash hider. There is a ring inside it, but i have no idea how to get it out. So weird. I need helllppp
any tips to get rid of the propane smell?
thanks very helpful, lookin into this gun and MP7A1.
@juanecheyt Thanks for helping him out. I've removed flash hiders before but I didn't know if this one was different so I didn't want to give any false information.
hello i got the same rifle and i have some problems.I will be happy if you could help me .After few shots (even with full mag with full gas) it stops feeding bb's in so when i press the trigger just gas blows out and after some try it releases all the gas inside the magazine out. I tried it with 2 diffrent magazines and i get the same result. Thanks for the video i will clean and oil all the parts and try again soon .If you have any solution for this please share with me. Thanks !
Hello, its been 8 years but i have exactly the same problem, did you fix it? How?
It sounds like you have one of those H&K dual power guns. Is this true? If this is the case, then I hate to tell you but those guns aren't made to last. I'm pretty sure there is no way to upgrade them, either. On the other hand, your problem is either the motor or the the battery. The motor could be screwed in too tight, and there should be an adjuster underneath the grip. Or it's the battery. I know you said you charged it, but it could just be a dead battery and may never fully charge.
@TheGookstain I don't know how to take it off, I haven't tried. But i'm sure it isn't very different from any other flash hider.
You're welcome and thanks for subbing.
Ah yes. That part can get stuck. It's a little difficult to explain but you have to pull it out so it's on an angle. Doing so will not break it, it's made to do this. Once you have it on an angle, push down and it should come out. Don't worry about breaking it, this gun is built like a tank.
Hi there awsome video i have a question 'cuz my replica shoots to hot its a RAS version. Did you ever managed to stabilize the shoot power, on mine the first shoot was 2.0joules and after turning npas all the way down it shoot 1.1 joules then had jumps to 1.78 joules in 5 shoots
@YATairsoft hey good video dude but can you make a video on how to take off the flashhider? or at least tell me
Same question. Did you figure it out?
Haha. My best guess is to apply lots of heat and then twisting it off. I don't see any screw holding it on place so it must just be glue.
Hey I just bought this and well I load exactly 30 round into a mag fill it up with the green gass and well it fires 7 rounds and the mag gas supply is emty I have 4 mags total and ive tried it with each one to same result so im wondering if its either the bbs are to small and is letting more gas escape then it should when fire or if its something to do with the gun im using stealth 0.25g bbs
I'm not sure if this a minor issue, but when I try to shoot my G36, it makes a faint electric sound once and doesn't shoot, anything out at all(even after I fully charge it). It wont make any sound after I shoot it semi auto or full. It only works when I cock it and shoot. I know its an electrical problem, but do you have any solutions?
Excellent video. Liked and subscribed.
Mines shooting like 3 rounds in full auto and locking back any ideas??
Thanks, I did it. Turns out I was doing it wrong, because I have to pull the gearbox before.
this video helped a lot thanks!
Does this gun dry fire? Mine does not
Thanks
i just hammered the crap out of it yesterday! :)
Is it still working? Would you recommend it?
I haven't used it in a while, but yes it still works. If you can find one at a good price, yes I recommend it. If I used this gun a lot, I would consider upgrading the bolt and trigger assembly to steel parts.
Hi there, I am writting from team profile so do not be confused :)
I have this darling for 4 years, so it's an amazing gun, BUT the full-auto never really worked for me. I tried new mags, replaced internals with RA-TECH, but nothing. Do You have any recomendations?
And for that guy about needing to cock on semi and then switch to auto, yes, I have the same problem - it gets stuck when cocked on auto, the hammer goes too deep and the f*ck locks on that bridge (or whatever it is)
are your freainds playing battle field 3?
Awasome video man this realy helped me i had the same issue. Thanks a lot! Thumbs up!
You're welcome! And thank you!
how many mm is the inner barrel? please respond back
Nice!
umm, just wondering how to remove the charging handle from the front of the bolt because mine snapped off and there is a tiny alloy pin holding it in... same as usual i dont want to break it so could someone help me, i need to remove that alloy pin!!!
Great video. Your gum-chewing was annoying though, but I was willing to suffer through it to solve my bolt lock problem.
I wasn't chewing gum, but I'll keep it in mind. Glad you liked the video though.
Done in fact ! :p
230mm?
Are you filling them upside down?
I still can't remove the part at 3:00 and I've been pushing it everywhere for over 10 minutes. Looks like it has a small plastic flap which doesn't let it go out. I don't want to break it, but I really want to learn how to clean and lubricate it before it's too late, so if someone could help me a bit... :)
Thanks for the video anyway
Mine does not dry fire and it shoots out bbs poorly
That or mw3, I don't remember.
5:30 I tried very hard, but I cannot remove that part :(
I just found out that it was the motor. Smoke was coming out of the back of the gun when i held the trigger. I'll just throw this airsoft gun one away... :l
Well thanks for the help, Subscribed :P
No
kthxbai
umm, just wondering how to remove the charging handle from the front of the bolt because mine snapped off and there is a tiny alloy pin holding it in... same as usual i dont want to break it so could someone help me, i need to remove that alloy pin!!!