Whirlpool iXelium oven reset code
Вставка
- Опубліковано 27 вер 2024
- This video shows you how to reset / recalibrate your iXelium oven using maintenance mode reset codes.
1. Switch off the oven at the isolater leave off for 10 seconds.
2. Keep the back button and the checkbox button pressed for 5 seconds.
3. Tap the checkbox 5 times in one second intervals.
4. Navigate to tested bit and hit the check mark button.
5. Switch the tested bit to on.
6. Press the back button.
7. Navigate to end and press the check mark button.
The oven should now be working...
Jesus Christ, a huge shoutout to this absolute legend, thank you!!!
Many many thanks! From India. Was missing my oven terribly in the lockdown.
Thank you so much! we got lost when it did't start working but this video helped a lot! Thanks from Russia!
Thank a lot mate for the tip!! I had to made some changes into the config mode to set my numbers on the numbers you showed. Hope the fix will last.
This oven has a misconception as when you open the door the steam get inside the screen circuits. I guess the issue come from there as mine was getting crazy like a ghost was touching the screen and playing with buttons. And also heating was not working.
Thank again and cheers from France 🇫🇷
Thanks a lot from Greece (Whirlpool AKZM 8350/IXL) 👏👏👏
Dear Joahnn,
I had this problem with my oven and after your tutorial it returned to regular state! So, thank you for posting this video! You helped a guy from Brazil! ;-) Best regards.
Doug 1 Glad i could help!
Can't thank you enough! This fixed my F4 error, saved me big $$$$$!
Legend 👍 Fixed our oven perfectly. Greetings from Scotland 🏴
Cheers Johann, I’ll give this a go. I’m on my third oven now! Very unreliable!!!
Are you in UK?
OMG! Thank you so much! I have looked everywhere for some help with this oven! And this video was it! Thank you!
Thank you very very much! You have helped me a lot! Greetings from Argentina
Thank you. You saved Christmas lunch!!!
THANKS my friend!! I really appreciate for all the information you gave me through your video.
At least for now, you saved us a few euros. ;)
Thanks for this, exactly what mine was doing as seemed to be stuck in a demo cycle when it got confused! Only 7 months old too, really annoying especially when trying to feed a family of 4 and on the run up to Christmas!
Out of interest, does this definitely means a fault with the panel or controller board? Or is this just a design fault by how the panel get blasted with heat everyone the oven is opened?
Very useful video Johan ke a leboga, baie dankie.
grazie tantissimo mi hai risolto un grande problema, pensavo di buttarlo via 🥰🥰🥰
Thank you very much Johann, now it works !!. Greetings from Argentina.
Sergio Gonzalez glad it worked! 🤜🏻🤛🏻
I did it, everything was perfect but it doesn't bring me the CONVECTION option in the Cooking menu. Did I do something wrong?
Can you help me?
Thanks man, saved my life :)
Johann: Thanks a Lot!!!! From France ! ;-)
The Reset was successful.
But After the Reset I have a Whirlpool Logo - before we had an Bauknecht Logo.
Do you have an idea to change it ?
I think its the UI , but I cannot find any informations about it.
God bless you Sir!!!!! I moved into my new house a month ago and I've been fighting with this oven, your video has been the only helpful video I've found thus far!
the same story we have ahahah😁😅
Thank you, you save my 50Euro 😊
I think I love you Thank you soooooo much
Hello, thank u for the video this is helping a lot !
I have another problem, the option staclean desapear. Maybe u know how to fix this ? Thank u
Thank you so much this help me a lot
Thanks !! It works!!!
dziękuję Johann, pomogłeś pozdrawiam z Polski
Very very good. Thank's
Thank you so much JOHANN !
God bless you🙏🏾
Thank you wery much , it`s working now well :D
Thanks a lot mate!
OMG🙊thank you !
Thank you! 😀 Всё заработало !
Spectacular!!! Thank you by the tip!!;
Hi Johan
Do you have more information on the setup UI AM and SW version ??
Thanx
Hi ! This method do not work on my oven. Combination activate / deactivate child lock or switch on / off demo mode. How to open hidden service menu ?
thanks a lot but whats the point of having an oven that cant take heat??
Mine isn’t getting better. I still need help please 😢
Genio!!! Gracias por compartir!!
Thanks mate!!!
Thank you, it worked.
How to bring back the oven menu after restart? Now it's working only clock in my oven.
Hi Johann im doing the exatc thing but if i press thr 2 buttons nothing happen. Can you help me? What can be a problem? Thank you
Gabriel Varga hey!
I have since moved house and now longer own this oven. I looked over one of the technicians shoulder after he was at my house for the third time to make this video, mostly for myself to remember...
@@TheCyclone321 Thanx for reply. My oven was silenced. :) of course no beepnoice. Took my 3 weeks to figure out.
Hello nice to meet you I'm a new friend 🙏🙏
OBRIGADO desde Brazil!
Ahah i’m using this trick almost every week
Thank you!! 😊
Has anyone tried replacing the fancy touchscreen with basic manual knobs??
Tengo el mismo error pero si aprieto la tecla de atrás + ok at the same time, we me bloquea o desbloquea.. :(
Please I have 6 sense whirlpool oven and its often after using it it will not restart then I have to pull it from the electricity.. But I know that I don't have to do that I need some code for this pleas helpppp
AKZM 6630 / IXL DOES NOT START THE COOKING. THE DISPLAY SHOWS THAT THE COOKING IS SPREADED. NEVER COOKING, NEVER HEATING HEAT. I DO NOT KNOW WHY? IF YOU WANT TO HELP ME WELL.
Thank you so much.
After 5 sec my micro. Go in block mode, any solutions?
Thx!
Thank you!!!
Thank you ,
THX :)
What about error: O-n ?
Ubare so great
Hi i did, and the menu item “traditional”
Disappeared.. did this happen to anyone?
I have cleaning dissapeared as well. Now how do we fix that?
reset
i only get the whirpool . i need the bauknecht. how do i do that?
Have you solved the Problem ? I have the same Problem 😂
Terrible tutorial!!!! Se arregló el horno con esos pasos
Lo hice pero ahora no tengo el menu de coccion, es decir no me muestra COCION POR CONVECCION
@@fai17101966 lo pudiste arreglar ?
You're the saviour, mate! Appreciate your short but darn useful video.
bovdurenko glad I could help
Saved me a baking crisis!
Wife was baking biccies for xmas fair and it stopped the last batch... almost!
Excelenta solutie . . . . . am avut 2 instalatori - care habar n-aveau de aceast "miracol"! Bravo si mii de multumiri!!!!!
The oven it's in demo mode, exit from demo. Disconnect power, wait 20 seconds, open the door, connect the power and press back [
I think you’re on to something, but the instructions aren’t working
Awesome. When an engineer didn't answer the phone, you saved the day! Cheers mate. Thanks also!
OMG... it worked man... thank you very much. God bless you man
Thank you very much for this tip Johann! Improved! It works! Thanks from Hungary.
Thanks. That fix it and made the kids (and so us) very happy.
Muchas gracias!! Ha sido de mucha ayuda!!! Y funciona!!!
Johann: Thanks a Lot!!!! From Argentina! YOU SAVE ME!!! MIL GRACIAS!!!
Hola. Me paso lo mismo y lo lleve al service. Lo pudiste resetear vos y te anduvo bien? Que te hacía?
Pleasure!
in brasil - brastemp gourmand reset code demonstration mode modo demonstracao
Estou tentando sair do timer no microonda e ate hoje nao consigo. Poderia me ajudar?
Hi Hello
Can it be fixed definitely?
In my case it is deconfigured every day, and it already tires me. I want to throw it away.
is there a way to fix it and ready or not?
TK A LOT
Witam mam piekarnik whirpol ixelium i wcześniej działało na niego takie odblokowanie teraz niestety nie. Po resecie nadal nie działa panel tylko reagują strzałki w lewo i strzałka w górę res,ta bez reakcji 😔🤔 prosze o pomoc 🙏🙏🙏
Had whirlpool engineers out 4 times now. Swapped the circuit board twice, think my actual panel is faulty. It’s only 7 months old
For my iXelium oven this helps me, thanks a lot Johann.
omg thank you so much, my oven is alive now. The door locking mechanism won't move ad the oven won't heat, but now it works as a charm, thank you again!
Watched it again 😂 thank you so much, it helped a lot!
What should the buttons are non responsive?
Thank you! You just made me save some money!
Omg thank you sooooooooo much. *huge hug*
thank you so much!!!!!
great solution, thanks
Guys, Am I only one who is not able to start config menu by pressing bottom button for 5 secs? :)
Buttons...
Classics... Beeps of owen was muted and i was waiting for it! :) just press combination for 5secs a click OK button 5 times.. do not await sound response :)
It really works! FromArgentina. Thanks a lot! Just a question, have you changed the pannel anyway?
In my case, oven shew F4 error...
My oven does not work after these steps. Does not start. I tried your suggestion because of demo mode. Can you help? (Whirlpool akzm 8380/ixl -Hungary)