To get the 'teof' option, press the 'temperature' button once you get to the end of all the options (i think the last option reads 'door', so press temp button then)
At the end of steps press the temp button then teoff will appear turn the knob then yayyyyy! Thankyou to the person who commented this before thought id leave this comment incase could help anyone else
Thank you. I found that I had far more steps to get to the TEOF code than shown and it looked like it had stopped a few times... I stayed patient and it worked for me 😊
@@lxttf The stage here ua-cam.com/video/QIrDJViZ9PA/v-deo.html was more like 10 presses rather than the small number shown. You also seem to get stuck... I kept waiting and was able to eventually keep going until TEOF appeared. I hope you can get it working 🤞
Thank you, helped fix Mum's oven error. The video is a find after no response from the aftercare phone line. Make sure you hold the ok button long enough, you'll hear a beep, and then good to go with the instruction in the video.😊
Un énorme merci mon four avait le code erreur F03 suite à une coupure électronique en pleines chauffe et grâce à ce tutoriel il refonctionne franchement merci 👍👍
Grand merci pour cette vidéo continuez comme ça! Le code F03 est apparu j'ai changer la carte électronique mais le code était toujours la et la sonde fonctionnait pourtant. Avec la carte neuve toujours F03 mais grâce à la video il fonctionne. Merci 😀
I think the video is a little off because the button pressing thing at the beginning took a little time for me to work out how to get "conf". After some faffing about I found "tEof" and managed to select "tEon". After waiting a minute the F03 did not reappear. I turned the oven off, waited 30 secs and turned it on. All solved.
I purchased my Hotpoint identical item 3 months ago. It was not cheap either and I had the F03 appear 3 days ago. As it’s the Queen’s Jubilee celebration everyone is off for repairs so glad I looked it up. I’m off to give it a go so fingers crossed 🤞 Thanks you 🙏
I can press only 2 times and not 4 times. The config doesn’t appear. This model has been a nightmare for me. The panel is not good. Should have bought a manual one.
Merci beaucoup pouvez vous me dire si il est possible d’augmenter le volume de la sonnerie? Et aussi si il est possible de lancer le minuteur sans avoir besoin d’allumer le four (très pratique pour la cuisson des pâtes !) Merci
Witam mam piekarnik whirpol ixelium i wcześniej działało na niego takie odblokowanie teraz niestety nie. Po resecie nadal nie działa panel tylko reagują strzałki w lewo i strzałka w górę reszta bez reakcji 😔🤔
It didn't work for me initially as the steps captured in the video were not enough to get to teof. Unfortunately, I had to buy a repair plan 😔 for an engineer to come who performed a lot more steps than captured in the video. I wish you had atleast mentioned about being patient and go through all the steps even if the sequence didn't match the video.
Witam mam piekarnik whirpol ixelium i wcześniej działało na niego takie odblokowanie teraz niestety nie. Po resecie nadal nie działa panel tylko reagują strzałki w lewo i strzałka w górę res,ta bez reakcji 😔🤔
To get the 'teof' option, press the 'temperature' button once you get to the end of all the options (i think the last option reads 'door', so press temp button then)
Dude, thank you so much.
@@skyman1693 your welcome
At the end of steps press the temp button then teoff will appear turn the knob then yayyyyy! Thankyou to the person who commented this before thought id leave this comment incase could help anyone else
Thank you. Couldn't understand what I was doing wrong but this has worked
Thank you for this. It wasn’t working up until I saw this comment 🎉 oven fixed!
You are a genious! Working again. Already was preparing myself to spend hundreds of euro for repairs. Thanks!!!
Thank you. I found that I had far more steps to get to the TEOF code than shown and it looked like it had stopped a few times... I stayed patient and it worked for me 😊
I’m still confused how to get to the teof place
@@lxttf The stage here ua-cam.com/video/QIrDJViZ9PA/v-deo.html was more like 10 presses rather than the small number shown. You also seem to get stuck... I kept waiting and was able to eventually keep going until TEOF appeared. I hope you can get it working 🤞
So did I! Thought I’d gone wrong and restarted
New heating element fitted and this got the rest going..... was a great help..... Thanks for putting this up....
Thank you, helped fix Mum's oven error. The video is a find after no response from the aftercare phone line. Make sure you hold the ok button long enough, you'll hear a beep, and then good to go with the instruction in the video.😊
Un énorme merci mon four avait le code erreur F03 suite à une coupure électronique en pleines chauffe et grâce à ce tutoriel il refonctionne franchement merci 👍👍
Grand merci pour cette vidéo continuez comme ça! Le code F03 est apparu j'ai changer la carte électronique mais le code était toujours la et la sonde fonctionnait pourtant. Avec la carte neuve toujours F03 mais grâce à la video il fonctionne. Merci 😀
Thaaaank you very very much for help !!!! I spend some monay for nothing !!! With this video you help me to repar it !! Thanks again !
Thank you so much, we were about to make pizza's and you saved the night! This video is gold! 😁😁
Couldn’t love this video anymore right now!!!! Thanks so much!!!
What do you do if the light dose not flash but is solid as this dose not seem to let you go past time?
Ehrenmann
Vielen Dank
Selbst die Techniker von Bauknecht wussten es nicht!!!
👍👍👍👍👍👍👍👍👍👍
Thanks worked after a bit of mucking about
Great video
I think the video is a little off because the button pressing thing at the beginning took a little time for me to work out how to get "conf". After some faffing about I found "tEof" and managed to select "tEon". After waiting a minute the F03 did not reappear. I turned the oven off, waited 30 secs and turned it on. All solved.
Great video, easy to follow though it took a few tries and it fixed the problem 👍👍👍👍👍
Thank you, this sorted mine right out 😊 happy days
I purchased my Hotpoint identical item 3 months ago. It was not cheap either and I had the F03 appear 3 days ago. As it’s the Queen’s Jubilee celebration everyone is off for repairs so glad I looked it up. I’m off to give it a go so fingers crossed 🤞 Thanks you 🙏
Great Video, Thank you very much !
THANK YOUU
I can press only 2 times and not 4 times. The config doesn’t appear. This model has been a nightmare for me. The panel is not good. Should have bought a manual one.
Great video. Thank you so much. It works a treat!
Thank you so much you save my life 😁😁
No problem 😊
Thank you so much 🤗💃🏽
Great video. Life saver 😊
Thank you!
Thank you! Quite a rigamarole but it worked.
Thank you 😉
I did it myself this time, congrats to me😍😍😍
Thanks a lot 😊🙏
Merci bcp pour votre expilecation
I don't find the 4 digits
Also I don't have OK button, just plus ,minus, lamp,& clock
Hey there, how can I fix error code f04?
Thank you upfront!
Merci beaucoup pouvez vous me dire si il est possible d’augmenter le volume de la sonnerie? Et aussi si il est possible de lancer le minuteur sans avoir besoin d’allumer le four (très pratique pour la cuisson des pâtes !)
Merci
My oven showing F07 and block the door.so please help me
Merci beaucoup
Thx it runs🎉
Hope you enjoyed your meal afterwards! 🍕
Got to the end point the lock symbol goes and then comes back on
What is error code F5E1
Witam mam piekarnik whirpol ixelium i wcześniej działało na niego takie odblokowanie teraz niestety nie. Po resecie nadal nie działa panel tylko reagują strzałki w lewo i strzałka w górę reszta bez reakcji 😔🤔
It didn't work for me initially as the steps captured in the video were not enough to get to teof. Unfortunately, I had to buy a repair plan 😔 for an engineer to come who performed a lot more steps than captured in the video.
I wish you had atleast mentioned about being patient and go through all the steps even if the sequence didn't match the video.
What were the steps to get to the teof code please
Does this also works for F04 error code
I had a hotpoint wmef742, how can I fix error code F03
Does this works also for f07 ?
Why is this information not in the user manual?it's been freaking my mum out all night
Exactly
F01 ?
Mine doesn't allow me to press the ok button 4times, it pressed twice and stopped. Im stucked right now
i had trouble with that too! you need to press it for 5 seconds at the start, *then* 4 more times
@@popsicle2365 yeah, I was able to achieve that at the end. Thank you so much.
Ummmm not worked for me
Hello
I am sorry to hear this please DM us and we can assist you further.
Kind Regards
Chantel
@@HotpointCustomerServiceUK hi, the instructions were not the same but I managed to get it sorted in the end. Thank you
@@HotpointCustomerServiceUK hi didn't work for me pls help
Press the temp button after all the steps and the Teoff comes on
Witam mam piekarnik whirpol ixelium i wcześniej działało na niego takie odblokowanie teraz niestety nie. Po resecie nadal nie działa panel tylko reagują strzałki w lewo i strzałka w górę res,ta bez reakcji 😔🤔
The error is bad enough, but all these steps for a factory reset? That's pathetic design.
In an Ariston F15-851C-IX-A oven, it turns on but the touch panel does not work, What can I do?