You left the part out where it's 300 FREAKIN DOLLARS! 🤕Thanks for the info though. It put me in the right direction 👍 My model number is a little different but I was able to get the part number of the control panel for mine.
The control panel on our washer went bad and the washer stopped working. Whirlpool service said they have no control panel replacement parts in stock and don’t know when they will get one. In the mean time I am having to pay a laundromat to do our laundry and into the third week not knowing when it will be resolved.
Having the same problem on my whirlpool range model number WEE730H0DS0. I am debating A) paying $97 to have someone come out and give me a quote to fix it B) buying a new control board and swapping it out C) buying a new cheap range at Lowe’s. What have you decided?
I have a similar model with an F1 code but this range is less than 1 yr old. Do I really need to spend $200 on a new board? When I turn the oven on to preheat, it will turn off and display the code almost every time I set a temp above 350.
I have had my Whirlpool gas range for less than 4 years and have had to replace the control panel 3 times!!!! $300+ each time. And now I am getting the F1E3 error again and I refuse to replace it a 4th time. Going to have to replace the range but it will DEFINITELY not be another Whirlpool. They refuse to do anything to help.
@@etothej that's terrible. They owe you a buy 3 get one free at this point! I hate all these new appliances with electronic control panels. Seems like none of them really last anymore!
We bought a Whirlpool gas stove 4 years ago, had no problem until last month (Sept 2022) then had F1 appear when having the oven set at 425°, beeping, cancel everything, reset at lower temp, F1 again. I Absolutely HATE ELECTRIC THINGS!!!! Finally used our outside electric just plug in oven. Works good!
I went through this last year in April 22 and Board was replaced by a tech all was ok. Now this year my Oven Temperature is off by 50 degrees a tech came out and swapped out something but my temperature is still off by 50 degrees again within 1 week, should I just get another stove?
Try to hold down the different buttons at the same time I was able to reset mine it never came back. I bought it from someone who said it wouldnt work. So on mine I hit the water level. Program setting and start at the same time. Most machine has a fail safe to do a reset or stop the process. If that does work try to replace the relays before you even attempt a board. Kind of. Like cntr alt del or a relay on board is bad. I also cleaned out the pump n line just in case. But the reset is what worked. It’s a damn good machine
Whirlpool has replaced 4 boards and still an issue. However, I plugged in an extension cord and the issue stopped until I removed the extension cord. I am still getting E2 F1. Any ideas????
You left the part out where it's 300 FREAKIN DOLLARS! 🤕Thanks for the info though. It put me in the right direction 👍 My model number is a little different but I was able to get the part number of the control panel for mine.
Just dropping a quick Thank You! While my model wasn't exactly like yours, your vid definitely pointed me in the right direction!
Glad I could help!
Superb video brother!
Clear and concise.
Excellent editing.
No bs.
Thanks for sharing your knowledge.
Peace and blessings.
The control panel on our washer went bad and the washer stopped working. Whirlpool service said they have no control panel replacement parts in stock and don’t know when they will get one. In the mean time I am having to pay a laundromat to do our laundry and into the third week not knowing when it will be resolved.
Had an F1 E0 error code, the old circuit board is blown, should I replace it and that’ll clear the problem?
Having the same problem on my whirlpool range model number WEE730H0DS0. I am debating A) paying $97 to have someone come out and give me a quote to fix it B) buying a new control board and swapping it out C) buying a new cheap range at Lowe’s. What have you decided?
I have a similar model with an F1 code but this range is less than 1 yr old. Do I really need to spend $200 on a new board? When I turn the oven on to preheat, it will turn off and display the code almost every time I set a temp above 350.
Behind the range there should be a tech sheet. I would consult that as codes and models vary
This is exactly why I like to barbecue right here lol.💯🔥
I have had my Whirlpool gas range for less than 4 years and have had to replace the control panel 3 times!!!! $300+ each time. And now I am getting the F1E3 error again and I refuse to replace it a 4th time. Going to have to replace the range but it will DEFINITELY not be another Whirlpool. They refuse to do anything to help.
@@sonofadam4339 If it wasn't for my air fryer, instant, and grill, I'd be screwed! Landlord is currently out of town and can't fix the problem yet.
@@etothej that's terrible. They owe you a buy 3 get one free at this point! I hate all these new appliances with electronic control panels. Seems like none of them really last anymore!
Mechanical ovens lasted 20 years, my computer controlled oven is broke in 6 months
Same! Brand new house brand new everything broken in 9 months smh.
3:20 that is the natural sound effect into ur phone from plugging it in, right? Did it when u unplugged too. Sounded cool.
F1 e1 is my problem and idk what to do it's blank
We bought a Whirlpool gas stove 4 years ago, had no problem until last month (Sept 2022) then had F1 appear when having the oven set at 425°, beeping, cancel everything, reset at lower temp, F1 again. I Absolutely HATE ELECTRIC THINGS!!!! Finally used our outside electric just plug in oven. Works good!
Thanks for sharing Mary 👍
A question when the screen on my stove gives an error, do I have to change the card?
I went through this last year in April 22 and Board was replaced by a tech all was ok.
Now this year my Oven Temperature is off by 50 degrees a tech came out and swapped out something but my temperature is still off by 50 degrees again within 1 week, should I just get another stove?
How do you know it's off by 50 degrees? Most all digital ovens can have the temperature swing adjusted +/- 30 degrees from the keypad
Is there anything i can try f1e0 to resolve so i can set the temp higher than 350
Try to hold down the different buttons at the same time I was able to reset mine it never came back. I bought it from someone who said it wouldnt work. So on mine I hit the water level. Program setting and start at the same time. Most machine has a fail safe to do a reset or stop the process. If that does work try to replace the relays before you even attempt a board. Kind of. Like cntr alt del or a relay on board is bad. I also cleaned out the pump n line just in case. But the reset is what worked. It’s a damn good machine
This is an oven.
Any idea on how to resolve the FSE1 error?
Are you experiencing a hard time getting parts for things these days?
Yes for sure. Got to buy what you can when parts are in stock
Mine currently says F2 and nothing more, that I can see. Unplugged for two hours but it still says the same.
En mi cocina Whirlpool me sale "F2" y no me deja apretar otro botón del panel
Whirlpool has replaced 4 boards and still an issue. However, I plugged in an extension cord and the issue stopped until I removed the extension cord. I am still getting E2 F1. Any ideas????
Damn. This one’s out of my pay grade something’s most likely happening with the plug
@@ApartmentMaintenancePro I replaced the plug and checked the breaker. All clean. The stove has it's own breaker. A home run.
Can you do f2 error
It beeps a reads F1E2
What do I do to fix it
I have the same issue. I called whirlpool customer service and they don’t even have services in my area!
This is a part replacement video not an error reset video, why you have to go and make things so complicated, that's why I like to barbecue🔥.
Not making things complicated. Just filming myself doing repairs. It helps people sometimes.
Helped me
dang digital stove! 1950 & 60's lasted way longerrrrrr!! im getting a wood stove 😠
Thanks man
SHOCK WARNING!! 3:22
3:21
According to the whirlpool warranty contractor tech, it’s roaches .
Yea this is too fuckin much just to bake some damn chicken 🙄
So your telling me I have to change all that shit I'll just buy new one then
I purchase my stove less than 3 wks ago. I'm not reapplying a fk think. Back to the store it's going
My stove is 1 month old smh
🙁
That part cost 3.0 to make and these greedy people want 300
So looking at the comments...Just buy another!
That's precisely what manufacturers expect you to do.