Car or Truck Failed Emissions Test? How to Quickly Fix the Problem and Get Back on the Road!
Вставка
- Опубліковано 23 лип 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/240/an/evap-emission...
Did your car or truck fail an emissions test lately? The good news is some of those emissions codes are easy to fix! First, check the gas cap! Then, check out this video to learn tips from Andy, like how to see if your purge or vent valves are still working! After watching this video, you should be able to quickly fix the problem!
0:00 Car or Truck Failed Emissions Test? How to Quickly Fix the Problem and Get Back on the Road!
0:38 Always check the gas cap first!
1:41 The EVAP purge valve located in the engine bay can get stuck open or closed
3:13 You can easily test electrical valves with a 12 volt battery and some wire!
5:16 EVAP vent valve is usually under the vehicle, and can get stuck, or spiders clogging a hose!
8:56 SUBSCRIBE! Shop 1AAuto.com Link Below!
🔧 List of tools used:
• Air Compressor
• Pliers
• Ratchet 1aau.to/oa/1AXAA00016
Subscribe: / @1aauto
Check out our playlist:
Tips & Secrets only Mechanics Know: • Tips & Secrets only Me...
For More Info visit us at 1aau.to/h/dKy/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
![4 Tricks to Use to Pass an Emissions Test Every time - [How to Pass an Emissions Test]](http://i.ytimg.com/vi/gr4g-nTZXUk/mqdefault.jpg)
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Would be nice if EVAP systems were fixed this easy. Most of the issues I run into are system leaks not valves. Now they are when the headaches begin even with a smoke machine they are a pain. Nice explanation of the working of the valves.
Thanks, just what I needed.
Thanks for this video
Awesome, Thanks
The best flog you have ever introduced.
Hey man thanks!!! I'm going to check all these things on my Acura tl type S 2007. I failed evap system 😔
I wondered what that little thingy off my manifold was... Thank you
I had a evap code on my 06 Lincoln Zephyr everything that you mentioned was fine. I looked over the whole evap system and found that the problem was the plastic tube that goes between the charcoal canister and the gas tank had a hole in it. Replaced the plastic tube that 1A AUTO does not sale. 1A AUTO can not have ever part .
Can you explain how filling the tank up to the cap can make the fuel enter the evap system and damage it?
My 5.3 vortex shakes & knock sensors was changed but computer says it’s still a bad sensor I even changed wire and plugs. What’s wrong
Excelent¡¡¡
Gold especially if you own a GM vehicle.
Been having evap issue for 2 years now Nissan Sentra 06 code p0448 mechanic change vent control valve last year and code appear 8 monthis or less again
What about the new model vehicles that don't have a gas cap???
Is p0420 always a faulty catalytic converter? If it is my only code what are the chances it is something else.
Yea Most common but it also might be a leak in the exhaust manifold or pipe and muffler then its a good thinking to check oxygen sensor . And coolant temperature sensor or fuel injection
Does 1A sell those specialty testing balloons? 🤣
Luckily I don't have to deal with that scam in Vegas 🤷♂️🤣🤣🤣🤣🤣🤣🤣
I want to shear something.
If u own a newer car run non ethanol or else o2's will clog
Short version:
If you want to pass OBD2 smog / inspection you cannot have a MIL (Check Engine Light) ON, and all of your OBD2 monitors must complete per the state in which you live and the model year of the car. California Emissions vehicles (as stated on you under hood emissions label) being the most rigorous.
Long version:
First off, the advice from a competent mechanic should be do not attempt to get a vehicle smog checked or Inspected (depending on where you live) if you have a check engine light (MIL) on for an OBD2 (MY 1996 or later) vehicle.
Why? On OBD2 vehicles the MIL lights main purpose is to flag OBD2 non-compliance (tail-pipe and evaporative emissions problems), when the MIL light ON it is telling you the vehicle will not pass inspection. Don't waste your money getting it inspected with the MIL light ON.
Obviously, the next step is to find out why the MIL light is on. You will need an OBD2 scan tool to find out what OBD2 codes (DTCs - Diagnostic Trouble Codes - which are standardized for emission related problems, one of the main reasons OBD2 was introduced) are stored which will identify the faulty system, circuit or component.
It is possible to repair the vehicle and not have a MIL light and still not pass inspection. Why? The vehicle has not completed the ODB2 monitors, meaning some are still pending.
So you may ask, what the hell is an OBD2 monitor?
It is basically emission related routines the computer executes (required by EPA per OBD2) to ensure the emission systems are working properly per a specific set of conditions known as a drive cycle.
When the vehicle is repaired, as per the MIL light codes, the mechanic will clear the DTCs which normally resets the monitors. Also, if you disconnect the battery to repair the vehicle the monitors will reset. The monitors look at the specific emissions related equipment on the vehicle and evaluated if they are working properly.
Well you may ask, what do the monitors require in order to complete, how many are there and what are the drive cycle requirements?
This information is sometimes hard to find from an OEM (Original Equipment Manufacturer, like Ford or GM) but has to be available to the customer. Finding the information on-line (www) is sometimes difficult. For example, for a FORD OBD2 passenger vehicle the information is provided at
www.motorcraftservice.com/freeresources/obd
For each model year there is a PDF explaining monitor operation. Some monitors require multiple drive cycles, which is the same thing as saying multiple trips of a specific driving style or type (similar to city driving or highway driving).
The premise of the video is to focus on a particular DTC pertaining to EVAP. Which granted is complex, but as complex would be the CAT monitor. Regardless, all monitors must complete (test good, with some exceptions for MY 1996 to MY 2000) before you can pass inspection.
99% of the time its o2 sensors from cheap gas, too much ethenol!, in cars since the 90's.