Mitsubishi Lancer Fix; rough Idle, loss of power fix part 1 of ?
Вставка
- Опубліковано 7 вер 2015
- Hi Viewers,
This is not a tutorial on how to fix ( I am not a mechanic). I am trying to fix this problem by myself to learn, repair and save money. My approach was to watch youtube videos ask experts for their feedback on fixing the problem.
In this video I am sharing my personal experience on fixing a rough idle, loss of power, problem on my Mitsubishi lancer 2004 ES 2.0L.
I am guessing it will take me few more videos to fix this issue.
I would love to receive your feedback on the repair and video editing; I will try my best to improve my future videos with the help of your feedback.
Thank you for watching and enjoy.
AfzaMoto - Авто та транспорт
I have a 2006 Lancer and I am having the same rough idle and vibration and inconsistent idle . Now that I have seen you do this I feel confident enough and I am going to attempt to remedy the problem myself. I have not changed the spark plugs in almost 5 years and I am going to attempt to change them myself. I just have to borrow some tools from my neighbor. Thank you so much for this video. God bless you.
I just wanted to update you on the progress. After cleaning the EGR valve the response to acceleration improved; but it did not fix the idling issue. There was also some oil in the EGR valve. I am guessing the blow-by gases caused the oil in the EGR Valve, and/or blockage in the exhaust system, perhaps the catalytic converts. I am still trying to figure out how to perform the exhaust pressure test.
Further, I decided to use the Seafoam treatment to clean carbon build-up. I used 1/3 in the fuel tank, 1/3 in engine oil and remaining in intake through the brake booster line. I couldn’t believe the results; it fixed P401 code (bad catalytic converter). After the treatment my O2 sensors and catalytic converter functionality worked at normal levels. However; during the treatment I saw smoke coming out around the rocker cover. Further inspection revealed there is an oil leak coming out of the camshaft seal.
Recently I have also installed an oil catch can. I also performed a compression test but readings are not consistent, maybe I have a bad gauge.
Engine shaking was fixed after replacing the front and rear mounts. My youtube video is available on how I replaced the mounts (ua-cam.com/video/FIda5OMI5t4/v-deo.html)
Engine idling is still not fixed, I am running out of options!
loved the video.defitely helped my wifes car from hesitating at stops.she doesnt have the problem anymore and i skiped having tochange any part.all it cost was 10 bucks and some elbow greese.thanks
Hi Viewers,
I just wanted to update you on the idle fluctuation issue. After diagnosing the problem related to the stuck throttle body value. A month ago, I took out the throttle body, and lubed the butterfly valve/plate with WD40. Since than I have no idle fluctuation issues. This problem is fixed! I am more than happy to provide any information. Thank you so much for watching and please subscribe.
Recent update; After installing the Oil Catch Can, (Here is the link on the video, ua-cam.com/video/uEIYts3Evtg/v-deo.html) idle is much better. I think PCV line was leaking or perhaps it was cracked. In addition, my battery's negative terminal was loose. I have replaced the negative battery terminal with a new connector. So far, I have not experienced any fluctuation in the idle. I will update you if it comes back.
Thanks
PS
I will be replacing, camshaft oil seal (Here is the video on how I replaced it, ua-cam.com/video/ZEdoJzgTtEM/v-deo.html) and perhaps rocker gasket. Thanks for watching.
+AfzaMoto
perhaps you do a lot of kick downs and run engine on very high revs. you can see the black film on and around butterfly plate before cleaning. I always clean butterfly and throttle using tooth brush and either WD40 or throttle cleaner it will efficently remove that black film that makes it stuck
+K4LI4NY4 Thanks for your feedback.
dude this defitely worked for my wifes car. she would drive and the car would hesitate but after using the mas air flow spray on all 3 units the problem went away.car works as good as new.thanks alot for the tips.big thumps up to ur tips...
I have an 02 lancer and you may want to check your adjustment on the throttle cable itself and also whenever you do anything to the vehicle, (plugs, cleaning, gaskets,etc) always disconnect the battery and take a drive so the ecm can relearn. Otherwise it is still trying to use old information. Good luck. Oh. and my biggest issue was the intake manifold gasket.
Hi Viewers,
Today, while I was sitting in my car, the idle started to fluctuate from 1000 rpm to 2000 rpm. It always stays above 1000 RPM (it is higher than normal). However; when AC clutch engages the RPM jumps to 2000 (it is also normal for RPM to go slightly higher when AC engages, but not 2k rpm). My understanding is that the RPM levels should stay around 700 and with AC on it should be around 900-1000k range.
Next, I turned off the AC to see if the RPM drops, and it did. But the idle was still at 1250 rpm after turning the AC off (normal is 700). While I was thinking of a possible cause a thought of stuck accelerator cable, throttle or a stuck accelerator pedal came in mind. So, I decided to put my foot behind the gas pedal and pulled it up. It immediately brought the RPM down to 700 rpm!
Now, this tells me that I might have a problem with a stuck throttle or perhaps cable and/or the gas paddle.
Now, I will be focusing on these areas to confirm and fix this problem.
Thanks
I am having a problem on engine cut-off when engaging,as for my engine idle its ok.we have checked on all the sonsors and are all fine.problem only occurs when taking off.
Loss of power, poor idle is also related to exhaust leaks, including, exhaust manifold w/catalytic converter, leaks from flange gaskets. A leak test should be performed. In my case I had a oil leak from the valve cover for many years. It eventually seeped into the exhaust manifold and perhaps contaminated the catalytic converter as well. I will be posting a video related to the exhaust system. thanks for watching.
+Eric Boyle Hi, thank you for watching my video and especially reading all the comments! I don’t think a flex pipe leak causes idle issues. However; there might be other issues such as, exhaust creating back-flow resulting in poor gas mileage, loss of power, catalytic converter functionality issues, rich / lean fuel issues etc.
You´ve helped me a lot with this videos. I have a question: Where is the "replacing the intake air valve and cleaning of EGR valve?
Thanks a lot man!!!
Thank you AfzaMoto for your excellent video. My Mitsubishi Lancer is idling roughly so I'll follow your instructions and take it from there, Cheers
I have a problem on engine cut-off when engaging gears, idle is ok
helpfull video but all mitsubishi have an thing in comment an problem with the ECU i have an mitsubishi colt 89' 1.5cc 84 hp engine witch was the first with eci multi and full injection on it so i cleaned the throtle all the sensors that could cause any problems with rpm and lose of power and i also unpluged the eci throtle control witch gave me more lost of power and more fuel consumptions so guys what you must really check is the ecu condition! i know that from lot of surces and i think the problem could be solved easy ;)
hey my plz plz plz tell something my car is a mitsubishi lancer and i was driving it and it started to slow down then it trun off and is wont start the engine is truning over but wont start dont know what to do so plz plz plz plz tell mi what to is the problem with the car its a 1996 GDI
Well there was some improvement, but it did not fix it, instead of cleaning and replacing, I will perform the below the diagnosis
1. Fuel pressure check.
2. Exhaust related issue, pressure
3. Catalytic converter functionality.
4. Fuel Trims
5. Mass Air flow sensor testing.
Thanks Bro,will try to do this to my CS3 tommorow.
afzamoto thank you, my 2003 lancer is flactuating in idle, i will try your tips.
Hi Afza, I love the techno music right at the beginning of this video. Can you name it for me please? Best regards Jay
hi got a Mitsubishi lancer 2010 2.0 manual car and got this 1500 rpm problem recently when my mechanic cleaned the injector nozzles manually. I noticed when I start in the morning it'd running normal at 1000 but when I drive and probably get warm it increases to 1500 and it plays. he coming tomorrow to check buy any reason or same as video
Hi sir I just want to ask u how can I solve my electrical problem in Mitsubishi Outlander
My lancer cant start whenever the engine is hot. Pls i need help
Hi
i have 2004 lancer invex 1.8i ,,, i need service manual with part number book. Can you help me Bro,, any website ,,, please :(
Hi I have a Lancer and I won't go into park,it moves only in neural and drive not even reverse what could be my problem?
It's very helpful...thank u
thank you so much +afzamoto I will do all those I really appreciate it
+getsome sports Hi, test PCV as well, thanks
Hiya nice video, question I have the same problem and the engine mount on the drivers side firewall was broken and causing the engine to really idle badly whenever I came up to a light I had to put the car into neutral to quiet it down. Have you also changed the transmission mount.? I have a 2000 galant and its located under the battery
+Ravenger Knight, thank you :) no I have not replaced it. I am getting clunking noise from the drivers side, it could be the transmission mount or perhaps the broken/damaged control arm's bushings. Thanks for watching, please let me know if i can help.
exist another idle sensor? whith 4 bolts?
my lancer is 2004 2.4
Hi,
what is default idle speed for 4G94 engine.
My Mitsubishi Outlander gives me alert electrical service required
Hi afza motor. I have a Lancer CS3 which is pretty similar to yours except that mine is a 1.6 4G18 and urz is a 2.0. I too decided to clean my throttle body one day and did so exactly the same way you did your car. After starting the car, (f.y.i - you are suppose to press on the gas to kick start the engine once ur done cleaning the throttle body) I noticed that my idle has gone up to 1100rpm -1200rpm and when I switch on my a/c it drops down to 1000rpm. This has now resulted in a increase of petrol consumption and I've got no idea how I can push back down the idle to its original 800rpm mark. I'm thinking of sending the car into the dealership to get a engine tuning done (ecu flash and adjustment) but I'm not too sure if it would solve the problem. Your help would be much appreciated. Thanks!
Hi, I would do a vacuum test, use OBD-II scanner and make sure all of the systems read "ok" or "completed". fix if there is engine light. Make sure engine air filter housing is secured and there are no leaks. test and clean egr valve. good luck and thanks for watching my video.
gracias amigo a query my lancer gdi lost power to not accelerate that show me ..... thanks for comentair
hi, have Lancer ex 2.0 engine 2009.I got a problem yesterday,the car can't run normal,if i put gas,when we with the scanner check we saw it like this(pressure control Solenoid A performance/stuck off and this transmission fluid pressure low. please help..thank you
thank you for this video , it is really helpful
i have a lancer 2002 model and when am on 55 MPH my RPM will be at 3000. what can i do, it doesn't shift to 4th gear. pls advice
Hi Tony,
do the following
1. Check transmission fluid, if low fill it, check for any leaks, do a smell test and see if its burnt. Hopefully you replaced it as per the maintenance schedule. If it was never changed then there is a possibility of failing transmission or bad valve body or bad clutch plates.. Change oil as per the maintenance schedule.
2. Check and fix any engine codes, use an OBD-II scanner.
3. Early and late shifting is caused by a malfunction in the valve body or a bad PCM, sometimes cleaning or replacing the valve body can fix the problem and in some cases fresh transmission fluid can fix. However; if the fluid was never changed or if the transmission fluid smells burnt than changing the oil will make this problem worst than it is now..
4. Test and verify the functionality of transmission range switch.
Good Luck
thank you very much . am working on it now
I have lancer 97 auto high rpm and no shifting gear help me brother
+jennifer bernales Hi, I am not an expert on transmission, but i would check the below items.
1. Check fluid level, quality of it, check if it was ever changed. If it was never changed there is a possibility of damaged transmission.
2. Check for an engine light, if there is a code, fix it.
+afzamoto thank u for the help I will check those all out...... here is another one I did a lot more issues in this one ua-cam.com/video/1XyMp0EPRWs/v-deo.html
+getsome sports okay do these as well, so fix one problem at a time and test, and then move on to the next solution, one by one,
1. Clean EGR valve, and tests its functionality (if it holds pressure).
2. Make sure engine air filter and its housing is sealed and there are no gaps/holes etc.
3. Clean MAF
4.Test injector (s) and fuel regulator.
5. Check your coolant ( test the coolant) replace if needed, and test coolant temperature sensor.
6. Perform a vacuum leak test.
7. Perform a exhaust leak down test.
it was the TPS ???
+Stephen Touzalin I had many issues related to the idle issue but one of them was related to the stuck throttle valve, (in the throttle body). I had no issues with the TPS.
+AfzaMoto thank u
haaaa thx god .. dont panic haa
bcjgxj
haaaa thx god .. dont panic haa