One of the best home simulator designs, setups, and video tours on UA-cam - your knowledge and experience are fantastic - thanks for sharing! Very strongly considering your approach and trying like hell to figure out how to make it work in a used garage that is 11' wide x 20' long x 8' high. Thanks very much!
Thanks for the kind words! Definitely check out Carl's new build tool. Here's the video I made walking you through the process. Let me know if you have any other questions and I'll help the best I can. ua-cam.com/video/p87VytIfUH0/v-deo.html
Great update video. The diy hitting strip is amazing. Look at the holy grail strip. I did a very similar diy version of that which it looks like you did as well.
Great video, thank you! Looking for "the better" projector. I don't need 4k since my screen space is limited to 9x12 (4:3). I was looking at the Optima GT1080hdrx but it doesn't have horizontal keystone. I think I'd prefer that option so I can mount the projector off center but it comes with a higher price tag. Do you have any suggestions? -Toni
Love your setup! Quick question - why didn't you just install the putting green mat/surface on your hardwood floor instead of adding the gym mat? I am planning to do a similar build in a garage but was going to install the putting green on the ground similar to a carpet. I am wondering what advantages there are by adding the foam gym mat puzzle under the putting surface.
You mentioned in one of your video's that you could help with getting the projector picture to fit on the screen. I have no clue how to do what you mentioned regarding the graphics card or some other other way to get it fit. I would like to get my projector back to factory settings and start over. My settings are kind of messed up. Looking forward to your next video
How did you hang the mattress pad behind the screen? I just got my DIY from Carl's set up and am getting too much bounce back, so I think I need to go that route as well. Does it help with sound too?
Here’s a video I made on how I hung the mattress pad: How to limit bounce back on Carl's DIY and other golf enclosures ua-cam.com/video/jygCO4HuPxo/v-deo.html If it made a difference in sound, I didn’t notice but it’s fairly quiet anyhow. Hope you’re enjoying your set up!
@@PixelGolf good to know! Thinking of cutting a whole hitting mat at the center of the “putting green” or just cut only the hitting part just like yours and maybe where people stand to avoid those wear spots
Where do you put the soundbar? I see the subwoofer, but curious to where you put the bar. we watch movies in our sim and I would like to put a soundbar but not sure where. Thx
Sorry for the delay responding. We have the sound bar on a shelf against the wall behind where you hit. And then when we watch movies we move it in front of the screen so you get that surround sound effect.
@@PixelGolf Yeah, saw that one. Thx for sharing. I'll definitely give it ago. It seems from that video that you used 2.2mm Lexan. I have some 3.0mm and it seems really thin and overly flexible across the 24" length. Have you tried other thicknesses?
Great couple of videos you did going over your setup. Is there enough width for both right and left handed players to hit? Also, you have quite a bit of space behind your hitting area and the floor. Would it work to make your turf area shortened? So instead of being 14ft long, maybe 12ft. I'm thinking for those of us with less room, we could just take the Mevo+ part apart when not in use.
Did you just cut out the Gym Mats for that insert? I'm looking to build a similar setup. Would you mind giving a little more info on the insert as well?
With the 3 foot depth (and Mevo+ setup) do you have any issue with wedges? More specifically, balls launching up and hitting the ceiling. I have the Mevo+ but only using a net right now so only hitting my long irons for fear of hitting wall above and behind the net.
Correct, from 9.5’ back and the 3’ depth my 56 hits about 1’ from the top of the screen on a full swing. Use urethane cover balls like Kirklands as they are much lower launch then other options.
Great video. I’m building the exact same setup from Carls. Do you mind sharing how much your putting mat cost? I ordered one and realized it not big enough.
None at all! I have my projector set to native and run a 4:3 format from my laptop. I run my firestick in a 16x9 ratio for movies, but can also run 4:3 if I Choose to. Movies look great!
@@PixelGolf thanks so much. Ordering one from carls this week and have been worried about not being able to fit a 16:9. Feel like the taller screen feels more comfortable to hit into
Thanks for the video... just built one I used .125 lexan vs .093 just because I had some already....works great!
Glad to hear!
One of the best home simulator designs, setups, and video tours on UA-cam - your knowledge and experience are fantastic - thanks for sharing! Very strongly considering your approach and trying like hell to figure out how to make it work in a used garage that is 11' wide x 20' long x 8' high. Thanks very much!
Thanks for the kind words! Definitely check out Carl's new build tool. Here's the video I made walking you through the process. Let me know if you have any other questions and I'll help the best I can. ua-cam.com/video/p87VytIfUH0/v-deo.html
Awesome series of videos! Thanks!
you should look into the sig pro softy insert
Great update video. The diy hitting strip is amazing. Look at the holy grail strip. I did a very similar diy version of that which it looks like you did as well.
I had the holy grail stop, it looked great, but I wanted the turf to match and it was fairly easy to make!
@@PixelGolf what foam did you use for the outer layer of the hitting strip?
Awesome video!! Thanks
Hi @GolfRnD which are the specs of the turf layer? Looks a thin standard artificial turf not specific for practice mat? Correct?
Will you be making the video about setting up the graphics card and the custom resolution to fit the screen appropriately? Thank you
Great video, thank you! Looking for "the better" projector. I don't need 4k since my screen space is limited to 9x12 (4:3). I was looking at the Optima GT1080hdrx but it doesn't have horizontal keystone. I think I'd prefer that option so I can mount the projector off center but it comes with a higher price tag. Do you have any suggestions? -Toni
Great build on the hitting surface, the gel inserts sell for $500
What did you use for turf?
Love your setup! Quick question - why didn't you just install the putting green mat/surface on your hardwood floor instead of adding the gym mat? I am planning to do a similar build in a garage but was going to install the putting green on the ground similar to a carpet. I am wondering what advantages there are by adding the foam gym mat puzzle under the putting surface.
You want it to have rise so the hitting surface has give or you will seriously hurt yourself and club.
Great video. Will go back to the beginning. I am not thinking of a projector but a laptop to Tv setup - any issues you think doing that?
How much did this setup cost you altogether Grand total?
You mentioned in one of your video's that you could help with getting the projector picture to fit on the screen. I have no clue how to do what you mentioned regarding the graphics card or some other other way to get it fit. I would like to get my projector back to factory settings and start over. My settings are kind of messed up. Looking forward to your next video
There’s a video floating around showing how to do it - I’ll see if I can find it.
@@PixelGolf thanks
How did you hang the mattress pad behind the screen? I just got my DIY from Carl's set up and am getting too much bounce back, so I think I need to go that route as well. Does it help with sound too?
Here’s a video I made on how I hung the mattress pad:
How to limit bounce back on Carl's DIY and other golf enclosures
ua-cam.com/video/jygCO4HuPxo/v-deo.html
If it made a difference in sound, I didn’t notice but it’s fairly quiet anyhow. Hope you’re enjoying your set up!
Where did you get the foam at as well, you mentioned Amazon but I don’t see it listed in the description. Thanks!
I will have my wife update with the link shortly.
How did you cut out your holes? How deep and where did you find you cups?
Thanks! Your content is fantastic, keep up the good work!
Links in description. Birdie Ball cups and they sell a cutting tool.
Does the turf where you stand to hit the ball get easily damaged?
It’s been almost a year and it is still fine. It has wear spots, but not bad enough to change it.
@@PixelGolf good to know! Thinking of cutting a whole hitting mat at the center of the “putting green” or just cut only the hitting part just like yours and maybe where people stand to avoid those wear spots
Are those half inch or one inch depth putting cups?
Where do you put the soundbar? I see the subwoofer, but curious to where you put the bar. we watch movies in our sim and I would like to put a soundbar but not sure where. Thx
Sorry for the delay responding. We have the sound bar on a shelf against the wall behind where you hit. And then when we watch movies we move it in front of the screen so you get that surround sound effect.
How do you hit a driver off of your homemade insert?
Awesome video! I've done virtually the same setup, but with Skytrak
Frank, I built a divot action mat and I use the tee claw system. I also use them outdoors to keep from chasing tees. They work awesome.
Thanks for sharing. What thickness Lexan did you use to make the hitting strip?
I used 1/4" from amazon. Worked great.
See new video, I teach you how to build one!
@@PixelGolf Yeah, saw that one. Thx for sharing. I'll definitely give it ago. It seems from that video that you used 2.2mm Lexan. I have some 3.0mm and it seems really thin and overly flexible across the 24" length. Have you tried other thicknesses?
Great couple of videos you did going over your setup. Is there enough width for both right and left handed players to hit?
Also, you have quite a bit of space behind your hitting area and the floor. Would it work to make your turf area shortened? So instead of being 14ft long, maybe 12ft. I'm thinking for those of us with less room, we could just take the Mevo+ part apart when not in use.
I could definitely shorten it a couple feet more and move my hitting location further forward. I also detach my mevo pad when I am not using it.
Did you just cut out the Gym Mats for that insert? I'm looking to build a similar setup. Would you mind giving a little more info on the insert as well?
Video with links coming soon
With the 3 foot depth (and Mevo+ setup) do you have any issue with wedges? More specifically, balls launching up and hitting the ceiling. I have the Mevo+ but only using a net right now so only hitting my long irons for fear of hitting wall above and behind the net.
Never mind. I rewatched and caught. Thank you
Correct, from 9.5’ back and the 3’ depth my 56 hits about 1’ from the top of the screen on a full swing. Use urethane cover balls like Kirklands as they are much lower launch then other options.
I bought the same set up, still in boxes unfortunately.
I’m suspect of what movies will look like…could you post a video of that? I’d love to see it
Will do!
Amazing vid! What's the size of you screen?
Thanks! Screen size that is projected on is 89x117”
Another question is would you use the gym mats if you had carpet to lay the turf on.
Yes I’d still use the gym mat as the carpet pad isn’t enough absorption or height.
Great video. I’m building the exact same setup from Carls. Do you mind sharing how much your putting mat cost? I ordered one and realized it not big enough.
$180 for the 1” gym mat and $320 for the turf. Links should be in the description
@@PixelGolf I saw the links. I got the gym matt’s but had trouble on AZ turf finding the putting mat size you have. Did you have it custom cut?
and thank you!
@@ErikFisherOfficial yes, they charge by the foot. The rolls are 15’ wide. It’s the cheapest one they offer.
@@PixelGolf ok thx
It looks like you're using a 4:3 aspect ratio, do you find any issues with that on the different softwares or if using it as a home theatre?
None at all! I have my projector set to native and run a 4:3 format from my laptop. I run my firestick in a 16x9 ratio for movies, but can also run 4:3 if I Choose to. Movies look great!
@@PixelGolf thanks so much. Ordering one from carls this week and have been worried about not being able to fit a 16:9. Feel like the taller screen feels more comfortable to hit into
@@happyscaling Yeah, I would want as tall as I could fit! Please use my link when you purchase, it really helps the channel!
Hiya friendo, how high is the ceiling in your room? Currently trying to decide if my 9' ceiling in the garage is adequate for a simmy of my own
I should state in the video how high. I believe 9.5’ over hitting location
I have a 9 ft ceiling in my basement and currently installing. Just keep in mind the inches you lose after the gym mat is installed and turf.
@@PixelGolf I'm in the process of copying your build! Few weeks of research and yours is by far the most bang for buck anywhere. Nice job!
can you hit left handed?
I can't on this setup unless I move the computer.
Looks awesome!! How did you make the putting cups or did they come with the mat?
Birdie Ball website. Cups and cutting tool are like 30-40 bucks and you can customize if you choose!
@@PixelGolf I think you mentioned that the original hole cutter was plastic. Would you have preferred steel?
Apparently they raised their prices. Plastic cutter, 2 cups and flags will now set you back $70.
How are you liking the GC3?
I love it!