Krytac M4 DMR Build tips
Вставка
- Опубліковано 9 лют 2025
- In this video we go over what makes an airsoft replica into a DMR platform and provide tips to get the most out of your airsoft replica for range and accuracy.
🛒🛒🛒 Purchase Parts and Accessories 🛒🛒🛒
🛍️ Explore these upgrades on our website: bit.ly/Wyshtech
PARTS IN THIS BUILD
Begadi Redux Piston
wyshtech.com/p...
EPeS Airsoft POM Double O-Ring AEG Piston Head
wyshtech.com/c...
ZCI "Anti-Heat" Stainless Steel Ribbed Cylinder TYPE O
wyshtech.com/c...
Tienly Aluminum Cylinder Head for Version 2
wyshtech.com/c...
EPeS Nozzle 21.0mm for AEG
wyshtech.com/c...
T238 Brushless Motor AEG Brushless Motor (33K RPM) LONG
wyshtech.com/c...
GATE EON Reinforced Tappet Plate for Airsoft Version 2 AEG Gearboxes
(MUST TRIM THE WIDTH ON THE FRONT FOR PROPER FITMENT)
wyshtech.com/c...
MAXX M4a PRO Hopup
wyshtech.com/c...
Maple Leaf SUPER MACARON Hop Up for AEG Rifles
wyshtech.com/c...
Maple Leaf Omega Nub
wyshtech.com/c...
Prometheus 6.03 EG Tight Bore Inner Barrel for Airsoft AEG (Length: 363mm)
wyshtech.com/p...
SHS Sector Delay Chip
wyshtech.com/c...
18:1 Rocket Airsoft CNC Steel Gear Set
wyshtech.com/c...
JeffTron Leviathan Airsoft Drop-In Programmable MOSFET
wyshtech.com/c...
🔥🔥🔥 GET your AEG tuned by Wyshtech Airsoft! 🔥🔥🔥
💥 SHOOT us a message on our website contact form! 💥
🔗 LINK HERE ---- bit.ly/Wyshtec...
🔊🔊🔊 Connect and Engage 🔊🔊🔊
🔔 Subscribe for more airsoft modding adventures: • Airsoft MP5 Disassembl...
👍 Like this video and share it with fellow airsoft enthusiasts!
🎮 Join our Discord community to share builds, ask questions, and connect with fellow enthusiasts: bit.ly/Wyshtec...
📷 Follow us on Instagram for exclusive build content: bit.ly/Wyshtec...
📘 Join our Facebook community for updates: bit.ly/Wyshtec...
📺 Join our Twitch channel for AIRSOFT TECH Q&A LIVE STREAMS: bit.ly/Wyshtec...
Im gonna get one of those gear chips for the tappet. I learned alot from this video.
Good video man! I hope you do more krytac builds.
Im sure there will be more!
Another great one!!!
Thank you!
Love learning more about this. I am not a Tech but love this stuff since I have been playing since 2013. I currently use 30 bbs. When I started I used 23 then .25 the 28s. Now I am at 30s lol. Now people are using 32s outdoor lol. It's crazy how much more common the heavier bbs are since I started. But I love how perfect it is not over 400 fps and not going over 1.5 j.
Right?! Heavier bbs tend to hold their momentum a lot longer than lighter bbs. Heck, I use .48g bbs in my DMR for those 150 yard shots.
@@wyshtechairsoft What is the realistic range of a 400 FPS AEG shooting 32s?
@@wyshtechairsoft What is your set up that you're reaching out at 150 yards with?
@@wyshtechairsoft what inner barrel length do u use in .48 ?or what i mean whats the whole build of ur dmr
2.2J with .48g @Miguelon88888
Idk about you but with me rocket/Shs sector gears apply to much upwards pressure on the piston compared to the stock. This might not be a problem on all pistons, but it was for all of mine.
It depends on the piston. Mainly the SHS pistons but this isnt an issue for the Begadi Redux piston.
I have had the opposite problem. With some pistons the stock sector gear puts too much upward pressure, and replacing it with a SHS sector solves it.
Great video
Thanks!
Your finished fps with .4 is almost as fast as my stock fps with .32 (287). Crazy good efficiency you got
Its all about air volume ration and a DAMN good compression set.
Great video! I actually went and bought a Maxx Hop up after watching this video last week. I have it feeding and shooting like a dream. My only issue is my mag release button is now super tight due to the bb feeding chamber. Did you run into this issue? Any tips on how to solve this problem?
Nope, not with epm mags. You could file down the mag release so its not so tight.
cant wait to watch but had a quick question. do you know what motor grips work good on krytacs or do you know any that I should 100% not use. cheers
PTS grips work pretty well. Its the most common grips ive installed on these.
@@wyshtechairsoft and you move the wires to the front where do you leave them where they are I know in like G&G the mother needs to sit against the back of the grip so I just run both wires through the front I've read so many things about people saying that that grip is too vertical and the gears don't engage properly and it messes them all up but watching your Tech work I trust you 100% before I trust any other d****** you seem to be a pretty good goddamn Tech and I only believe what you say and what negative Airsoft says nobody else so thanks for your help my friend I'm going to watch the video here shortly can't wait to see that finished
How do you figure out the air volume ratio? I wanna get 1.9 joules with .4 for a dmr i have a 130 spring in it right now, i have a full cylinder on the way and compression upgrades.
Use a 6.03x363mm barrel, and you should get your 1.9J.
Thank you very much man!!
@wyshtechairsoft where do you get this information from? I'd like to see the data if possible
@@wyshtechairsoft😂😂😂
What about 6.05x450mm can you figure out my ratio to get 1.9j
mine is 500 fps. 455 edgi inner barrel, 155 element spring, brass cylinder head, double o-ring nozzle, stock enc piston body, warwolf piston head
Hey bro. Great vid.
How was your stock krytac air nozzle. Would you change it to one with a better seal?. Ive seen videos about the stock krytac air nozzle doesn't have a good seal. ( No o ring ) Just wondering if this is true. Cheers.
Its fine the way it is. You'll gain little performance and it also depends on the brand of nozzle with oring you go with. My favorite combo is EPeS nozzle and EPeS EF (extra fit) cylinder head. It always gives maximized seal with absolutely no leaks even with the nozzle all the way forward. It also NEARLY eliminates nozzle wobble. Which nozzle wobble is ONE of the causes of mid cap syndrome.
@@wyshtechairsoft I purchased the Prometheus one that's specifically for krytac m4s series.. As I have the trident spr. Very curious on the "little performance" it would have. I haven't put it on yet. Will update when I do so.
Thanks for your information and replying back !
very good results , as for the DMR build makes me wonder because in my country no M4s/M16s qualify for dmrs except the SPR mod0 platforms , do you guys alow M4 dmrs ?
It depends on the field but generally is doesnt matter what the airsoft gun looks like. As long as it doesnt shoot too hot. Only when we do milsim games that it matters.
@@wyshtechairsoft isnt a DMR restricted in amo and total magazines that can carry to battle? there are more fps but comes with a cost.
Do you build for people? I really wanna do my lvoa-c but i have no clue how to start as my hpa knowledge is slapping and adapter in a gas gun
Yes I do. Visit wyshtech.com/pages/contact-us and leave a message on what you're looking for. Then we can go from there. :)
i have the older trident with the keymod rail would you suggest the same parts
Yup, gearbox shell is exactly the same design.
Can i use a 6.05 380mm barrel for .4s at 400 fps (1.5j)? and by your experience whats the best bb weight and barrel lenght for a 1.5j aeg? would a .32g bb "perform" better? thank you
The quick answer, No. Your goal is to match your air volume of your barrel vs your cylinder COMPRESSION ZONE volume to the weight of your bb. I highly recommend reading this article about the "What Barrel Length goes with what bb weight in an AEG?". Link: www.airsoftsociety.com/threads/what-barrel-length-goes-with-what-bb-weight-in-an-aeg.153191/
@@wyshtechairsoft the article says about 6.03 barrels, i dont know if using a 6.05 barrel would make diference, and about the 1.5 joule question, i would like to know if a .32 performs better than a .40, in my 1,8J SR25 im using .40s in a 420mm 6.05 barrel
Could you please explain why you have to change the krytac bevel and sector gear when you still using 18:1?
Bevel is known to failure and the sector gear tappet timing sucks.
I just changed my compression system but went with a full cylinder and a 455mm 6.03mm barrel. I usually use .28g and sometimes .32g, what you think is that’s fine or should I go shorter
6.03x 455mm is fine for those weights.
@@wyshtechairsoft I was thinking to pout a 6.03 prometheus barrel, but what length would work best in my setup?
@daniramirez6043 With the full cylinder and a 6.03 barrel. You want your barrel to be around 365mm long. I say around because I dont know the exact measurements for your rifle's cylinder diameter and compression distance. Though it wont make much of a difference anyway unless you want to shoot heavier bbs like .48g and trying to hit targets 500ft away. Lol
Can I buy this build premade?
If you head over to wyshtech.com/pages/contact-us and leave a message on what you're looking for. We can go from there. :)
why is everything grey :(
It isnt, most of the stuff in the footage are those colors.
@@wyshtechairsoft oh ok
We turned into dogs
When You upgrade a m4 for dmr shots: o ok
When you upgrade a .308 for dmr shots: DUDDDE THAT LOOKS SIIICCKK
Right?!
We have limit up to 2.8J in Poland using 0.4g or heavier so your result is not spectacular.
You're absolutely correct but this video was to keep the rifle 1.5J or lower and STILL be able to sufficiently shoot .40g as you cannot shoot a .40g bb without proper air/volume ratio adjustment. Which in this video was supposed to show how that works.
In 450 fps using .2's what innner barrel lenght and inner diameter to get max joule output in .40 ..
That’s my husbands gun. 😁
Oh right on!