Відео

Hi! I´m planinng on upgrading my sr25, would you mind listing the components you used or those you recommend to upgrade? Thanks in advance!

Thanks to ur video I got myself a DD5” as a cheap way to get a full metal AR free case and grip. Now thinking if I want to open the gun up to try making it better Edit: atm I switch the motor to a 23k classic army motor, spring and T connector. Rn doing 1.1j

Hey bro. Great vid. How was your stock krytac air nozzle. Would you change it to one with a better seal?. Ive seen videos about the stock krytac air nozzle doesn't have a good seal. ( No o ring ) Just wondering if this is true. Cheers.

This is a pretty thorough method. Was able to do this with the Ava-4 with a lot less filing. The biggest points are the post that blocks the perun from sitting properly. The raised screw post needs to be filed down slightly so the screw can be more flush. The little bevel in the perun is required to move the perun about 1/8" to the left. But that's it from what I witnessed. Bevel outside the gearbox for the selector plate is required. You don't have to put the safety lever back in if you don't want to. That's a realism feature, Perun will cut off when switched to safety. I totally understand why people would want to put it back. A perk of the optical sensor though. and the trigger mount is magnetic so it will stay in place while you put the pin back through the lower and function as it should. I also used one of the standard stickers and trimmed the over hanging black portion. If the obstructing post is filed relatively flat as well as the screw post, that should be ample room. Nothing wrong with taking the extra precaution but I wanted to share my experience! Great vid.

Can this gun run a 11.1 reliably stock?

Has the hopup arm been sold out?

Do you reckon I can get one and instantly put a 27k brushless ??im also gonna replace spring with M100?

wow 400fps

Hey man, so the Solink motors are advertised as being unidirectional, meaning that you can delete the anti-reversal latch. I'm wondering if this makes the gun any quieter, have you tried it?

Could you please explain why you have to change the krytac bevel and sector gear when you still using 18:1?

Solink did recommend to keep the torque at 60% In China, the solink v5 is retailing at ~90USD with the programming card, which still consider as overpriced by the local

I would call the GE SR-25k a battle rifle and not a DMR it’s more for the DMR AR-10 look but with M4 performance

Hey im also building the cyma sr25 but i would like a faster trigger response, the problem is there are no 13:1 gears with that pickup pin position is it realy that big of a problem?

How can I find the right spring buy to upgrade my echo 1 gat? I can't seem to find anything that's compatible

Can you test this motor on a titan ii!?!gate threw a "new" motor that is compatible with the titan ii and can adjust the motor revs via the app!!!so can you check if the original solink gen5 can do this adjustment too!?!?

Brushless motors are great

Can i add 595mm inner barrel on this Dragunov? I own a better barrel than the default one, the problem is that the default one is 680mm...could i get deflection of the projectile at the exit by doing this change, what do you say?

Hpa or aeg?

One absolutely ugly foregrip ruins the whole thing

If you use a shorter inner barrel, will the bb not hit the inside of the mock suppressor?

Hello. I've done all as described. Sticker all fine. All sensors checked as shown. Full reset done and it's firing in full auto on semi but about 4 rounds, on full auto it's full auto until you release the trigger. When on semi trigger pulled I also can't spam the trigger, there's a wait then it ticks and I can fire again. Anybody had this issue? Please help.

Hey ! I've got a question considering yhe trigger micro switch and the little white piece that gets pressed. ( 6:16 ) Does it suppose to move back after release ? I've got some issue with my mp7 and i suppose that comes from that.

Thats not a pkm thats a mg42 now 😂

What upgrades?

My favorite gun in far cry 4

Very nice

The paint job lol gg

Noice 👌🏽

097a?

Fantastic video, love the rpm tachometer, I've been using the laser version and it's a pita. Just got a budget Solink and T238 in to test. Interested to see what type of bearing they used to achieve the unidirectional function as it's super easy to break these small bearings.

Can it pull sp 150 spring?

.4g BBs why ?

We have limit up to 2.8J in Poland using 0.4g or heavier so your result is not spectacular.

Some people report that bull tooth lifters and metal nozzles will harm reliability?!?!? What should you pay attention to when installing???

Great video as always! I will be stopping by in the future to purchase an new cylinder/piston and motor and maybe a new gearset for my aeg. This video helped in regards to info plus you're local to me and better than Ben (you know your "favorite" Ben) at airsoft tech.

Love your teching content. Keep it up man.

You want the play to be in both bearings not in the axle of the gears

How many of those bbs actually stayed intact

Hi, thanks for the video. Can you tell me what "PME" means? You talk about tappet plate PME. Thanks

What battery you use . What C on it ?

Some tech I commented on said that you’re supposed to have .3mm of space for bearings 💀 I’ve shimmed my bearing to .1 to .05 and they run fine

That thing sounds like it’s crying maybe revisit shimming no hate

Here are my build tips for these. Tip 1: don't buy it. The internals are among some of the worst and at this price point you'd expect it to at least last a few years considering cyma Ak's and g&g raiders refuse to die. And worst of all parts are proprietary. Bullgear makes a CNC tappet plate which is a horrible idea. The piston is half length. Cylinder same thing. There's a 4th gear. Same reason I don't like svd's as aeg's.m and none of the gears are standard Seriously save the money for a gbb. Yes it's $700 for the gun and 6 mags but it will at least run for a long time and whenever something does break you can always get parts for it.

Great video! Just getting into airsoft so I was hoping you could help me a bit. When you talk about removing teeth, do you mean from the gear or the piston? What speed motor would you recommend to get about 25-30 RPS? Have a perun mosfet and was given a set of 13:1 gears. Have a 7.4 lipo but was considering upgrading to a 11.1 if I can find one to fit. Thank for your help and keep making these videos!

Top

Why buy 501mm and cut the inner barrel? Prometheus got the 469mm ,6.03mm.. Is the 1mm got much of a difference on the output?