Simple and straight to the point video, good point of view camera showing every detail. I was having doubt that I machined my 80 percent correctly when I noticed my trigger assembly was going to prevent my safety to be installed, but I love how you pointed out, that it needs to be cooked. Thanks!
This is a great video, thank you for making it. I had to pause a few times and go back, but with the help of this, I was able to assemble my first lower. Thank you!
Great video for the first time builder to follow. I watched a lot of them to do research and found yours to be straight forward and not full of a lot useless talking. Thank you.
"It's so easy, even a child could do it... And they do." Excellent vid-- in less than 20 minutes you dispelled all the fear of putting an AR together. Much obliged! Subbed, btw
OMG the F-ING slide release roll pin was a nightmare, tore my brass hammer head all up I WAS ABOUT TO SAY WELL IM SCREWED, the pin went about .010 to deep and the release would not slide into position to be pinned in, my small punch literally bent into a wave and got stuck in the other hole trying to push it back. LOL I am a trained Machinist so I have hands on so not my first rodeo with tools. I finally got it flush then the nightmare of going all the way through began, I had to use a vise and finally just said F it and beat the hell out of it until it started to move and finally done! Sadly I marred it up some THE REST WAS A BREEZE FOR ME THANKS AGAIN I WATCHED AND FOLLOWED THE STEPS
Bro, you made a solid video! Great pace and info as well as filming it all clearly! I just bought a RightToBeararms ANderson AR15 kit. Tomorrow I will use this video to assemble the lower and pop the already done upper on. THANKS FOR MAKING THIS (PS IT PISSES ME OFF WHEN I SEE MORE LIKES THAN SUBS. ON VIDEOS, COME ON PPL SUB AS WELL YOU PEABRAINS)
Whatever you do, don't install your trigger guard roll pin like the way it was done in this video. Make sure you support the back side of the trigger guard roll pin hole. Seen way too many people ruin their lower receivers doing it that way beating on it unsupported
Great video man I been searching to find a video of someone with my exact gun so I could see how to put my arp back together, I lost my springs and a couple bolts , where did you order your kit ?
I like this guys better. ua-cam.com/video/4DQIR023-b4/v-deo.htmlsi=LsmXhaZ6SYDClZgq Also you can put a magnet on the first pivot pin to hold the detent. UA-cam channel “School of the American Rifle” is a great UA-cam channel that has regular content.
By far the best video I've found that shows the parts UP CLOSE. Every one else's videos were giving me a headache lmao.
This.
Simple and straight to the point video, good point of view camera showing every detail. I was having doubt that I machined my 80 percent correctly when I noticed my trigger assembly was going to prevent my safety to be installed, but I love how you pointed out, that it needs to be cooked. Thanks!
This is a great video, thank you for making it. I had to pause a few times and go back, but with the help of this, I was able to assemble my first lower. Thank you!
No directions came with kit so I enjoyed this video it was very helpful
Great video for the first time builder to follow. I watched a lot of them to do research and found yours to be straight forward and not full of a lot useless talking. Thank you.
This is the best video to use compared to all the others
"It's so easy, even a child could do it... And they do."
Excellent vid-- in less than 20 minutes you dispelled all the fear of putting an AR together. Much obliged!
Subbed, btw
Best video!!! Super descriptive and gave great tips while doing it!
Very well done bro, the perspective is perfect. Thanks
absolutely great video. Thanks so much for posting it.
Great video! Made my first build very easy.
Short and to the point. Thanks.
I was reluctant to actually buy the kit until i watched this video! THANK YOU!
Do they sell bottom kits already built?
Great Video, straightforward.
Detailed explanation. Thanks man.
excellent video. Just did my first build using this video. Came out great. Thanks for information
Outstanding video. Very informative and helpful. I just ordered my ar kit and cant wait to build it!
Bro thank you so much your video is so helpful it help me alot and i got same lower reciver
Thanks bro. This was nite and day compared to working on my CZ trigger springs kit and sear cage.
OMG the F-ING slide release roll pin was a nightmare, tore my brass hammer head all up
I WAS ABOUT TO SAY WELL IM SCREWED, the pin went about .010 to deep and the release would not slide into position to be pinned in, my small punch literally bent into a wave and got stuck in the other hole trying to push it back. LOL
I am a trained Machinist so I have hands on so not my first rodeo with tools. I finally got it flush then the nightmare of going all the way through began, I had to use a vise and finally just said F it and beat the hell out of it until it started to move and finally done! Sadly I marred it up some
THE REST WAS A BREEZE FOR ME
THANKS AGAIN I WATCHED AND FOLLOWED THE STEPS
Yeah that roll pin sucks
@howtofirearm1549 some scotch bright pad and elbow grease and 90 % of the Mars are gone. That was a pleasant surprise
I really enjoyed this. Thanks man.
Outstanding hoss
Great video
Great video. I downloaded it for future reference as it may not be here tomorrow or the next day depending on YT's policies on gun stuff.
Great video. Thank you for sharing
Bro, you made a solid video! Great pace and info as well as filming it all clearly!
I just bought a RightToBeararms ANderson AR15 kit. Tomorrow I will use this video to assemble the lower and pop the already done upper on. THANKS FOR MAKING THIS
(PS IT PISSES ME OFF WHEN I SEE MORE LIKES THAN SUBS. ON VIDEOS, COME ON PPL SUB AS WELL YOU PEABRAINS)
Whatever you do, don't install your trigger guard roll pin like the way it was done in this video. Make sure you support the back side of the trigger guard roll pin hole. Seen way too many people ruin their lower receivers doing it that way beating on it unsupported
Agreed. This was not ideal.
Berry gud video brother 👍
bro just built a ar in 20 minutes
Great video!
Good video.
Thanks man! SUB! And saved video incase u want a good walk through for a future build ...I'm working on an AR 10 now 😅
Thank you! GBA 🇺🇸🇺🇸🇺🇸🇺🇸
Great video man I been searching to find a video of someone with my exact gun so I could see how to put my arp back together, I lost my springs and a couple bolts , where did you order your kit ?
PSA
I just built a gun with you! Thanks
Great video man what upper is that?
Thanks! It's a PSA
Where can you pick up those pin helpers on the key ring?
I got mine at academy sports. Probably any outdoor retailer that carries firearms.
thanks dude!!
Any reasonable kits out there for ar15
Many detents have been lost during the making of these products. It’s a source of sadness to this day.
Do you have a link for the trigger you put in?
www.opticsplanet.com/trybe-defense-v2-single-stage-ar-15-curved-drop-in-trigger.html Mine was a V1
Straight
I like this guys better. ua-cam.com/video/4DQIR023-b4/v-deo.htmlsi=LsmXhaZ6SYDClZgq
Also you can put a magnet on the first pivot pin to hold the detent.
UA-cam channel “School of the American Rifle” is a great UA-cam channel that has regular content.
I love you no gay shit
Sweet good job bro
Great video
Great video!