ok, gang, but can we take a moment to respond to the narrators voice, cadence, and use of language? This gal is great. Her enunciation is crisp and clear, and she speaks slowly and susinctly.....just wonderful to listen to!
We had the Woodmiser two saw , with the return rolls on top , two guys , 25,000 fbm per shift , sorted to size and grade , a lot of the slabs were full 2 inch , and stickers were put in every 2 feet to aid drying . I loved that little edger . . You ladies can work for me anytime ... I sure wish my yard was as neat as your's well done ladies
I used to use a breast bench in a sawmill, but when we upgraded to an edger it made production so much easier and quicker, although I've operated all kinds of edgers. I truly appreciate the manual labour that goes in to using a breast bench
Excellent video footage. Nice edger even though it isnt Orange. If all our youth worked as hard as y'all this day in time. Wear some gloves save your little hands. 👍🇺🇸
@Wayne Dawson At school learning English, which is _where_ you should be. There's no reason a sawmill cannot be run entirely by women, except in your teeny tiny brain.
You pay attention when you run the edger. Kickbacks can kill you. My dad ran a edger at a big sawmill in Illinois and it kicked back a board so hard the dogs didn’t stop it. He got hit in the stomach and it almost broke his back. He was down in the hospital for a week and didn’t go back to work for 2 months. A second set of dogs would have protected him. They installed a second set in front of the first ones and never kicked back like that again. Stay safe and great video.
Y'all are two hard working young ladies. I enjoy watching your channel. My wife and I are planning to go into the mobile on site sawmilling business we have LT40 super ordered that will be here in December.
@@AlmostItalianBrothers I ordered mine about the second week of February it was a 39 week wait then. When I was in high school from '95-'99 the ag. dept had a woodmizer that we milled lumber on and I have wanted one ever since. I have not ran a mill since then but I have always kept up with the technology and I always look at all the mills when I go to the Mother Earth Fare every year. I have the opportunity to take different deduction in life so I am going to go at it wide open. I am doing all the research I can before the mill gets here so hopefully I can hit the ground running.
so that's how you cut a lot of your batons on the narrow stuff that is the neatest machine I ever seen I've never seen one before but I'm just a carpenter I've never ran a sawmill except my dad's little sawmill in the pasture
Great video, I like the background music too it adds a nice touch, speaking of touch i would wear some gloves. I find it helps with your grip and preserves your hands.
I like the video! Going to check your other videos! One note though: Maybe you should keep your microphone a little farther away from your mouth, sometimes you can hear squishy and popping sounds.
Pretty awesome, never heard of a machine like this. Does this save a ton of time over making cants on a sawmill? I assume it's an efficiency thing eh? Pretty neat :)
Side note. In South Louisiana a flitch is a wet fart that leaves debris where you don’t want it. This is the first time I’ve ever heard this word used for anything other. Now I know!!
you guys seem to be doing well without one, buy where I worked when I was young, they had a shadow box. It cast lines onto the board, so the operator had a better idea of where to put the board.
I'm a Tennessee mountain boy, currently stuck in the city, and good Lord do I miss seeing women like these two. Strong, smart, hard-working, resilient, modest, and beautiful...but can stand her ground. Ladies, if you see this comment, keep up the integrity I. Who you are and your morals. These girls today need someone to look up to
Most have a fixed circle blade on one side and one you adjust with a lever on the other. Some have fixed notches for 4-6-8-10-12" widths, others you simply eyeball the moving blade to the board and let it rip.
You two young lady’s work harder then a lot of man I know they would be crying cause it’s to hot it’s to cold I’m tired I’m hungry the excuses just go on and on so good job to you
Was wondering if your operation has looked at adding a lucas mill. Does a great job of milling the 1x , 2x 4x and 6x and even 8x with the bigger blade , without the need for an edger. But that edger looks like it would amazing for the live edge siding.
I raised five daughters in the country so ladies if your in the wood yard put that hair up or stay out of it... If you get caught it will make you permanently ugly quick ! Stay safe and don't take chances on fate or you will loose one tragic day.
Pura vida amigas that machine will be a dream in my country because I could work with cocobola. Cedro .ron ron fine precious wood lumber from my country pura vida
Wow, that’s useful! What do you do with the excess wood that you don’t use coming off the edger? I would think it would be nice to chip. This operation is so cool, I still can’t get over it! Do you plan on posting videos more than once a week?
I know right? You will definitely want to consider getting one along with your LT40. I only post on Sundays but don’t worry I will definitely make those LT40 videos you have been wanting!
How refreshing to see a couple of gals actually showing skill and doing the work, not dressed like Instagram models just trying to exploit their looks for views.
Will you please highlight the reasons that you chose to move onto the Lt 40 from the 35 What did you gain, and why was this necessary? I currently have a woodland mills Hm130 max, looking to move up to a LT 35. But would like to know more about why the LT40
We have grown significantly as a business, we started out originally with an LT15 and have upgraded as we have grown. The LT40 has a much bigger engine so it can go a lot faster, it also has a board drawback so it is a lot more efficient because the swamper doesn’t have to walk around the mill to remove the material. I hope that helped!
Have you thought of have muti disc saws in your edger however I see that your present adaptation as just a contingency and definitely hard work ethics are your family forte = conscientiously viewing
What’s the reason you ended up getting the stationary controls on the LT40? We plan on getting the walk behind controls but what are your thoughts on that? Also we really don’t want to be wearing a mask every time we mill, so do the stationary controls help with breathing in sawdust?
I never had to much trouble with sawdust, even running the LT35 which you had to walk behind. But it does help with sawdust a little, especially on windy days!
Hilarious...I'm studying to open my new milling business in my mid 50s and the best knowledge is coming from a couple of teenage girls!! Lmao
ok, gang, but can we take a moment to respond to the narrators voice, cadence, and use of language? This gal is great. Her enunciation is crisp and clear, and she speaks slowly and susinctly.....just wonderful to listen to!
Succinctly........
Great video showing equipment and professional using to fullest capacity. Thanks again, great teamwork.
We had the Woodmiser two saw , with the return rolls on top , two guys , 25,000 fbm per shift , sorted to size and grade , a lot of the slabs were full 2 inch , and stickers were put in every 2 feet to aid drying . I loved that little edger . . You ladies can work for me anytime ... I sure wish my yard was as neat as your's well done ladies
I used to use a breast bench in a sawmill, but when we upgraded to an edger it made production so much easier and quicker, although I've operated all kinds of edgers. I truly appreciate the manual labour that goes in to using a breast bench
Love your narration and the music you choose.
I love the process here: watching boards and lumber being born. How wonderful is this.
Some gorgeous boards.
Good to see you wearing hearing protection, I didn't when I was young and paying for it now.
What?
Your family has a great processing facility. Hard work brings good fruit!!
Excellent video footage. Nice edger even though it isnt Orange. If all our youth worked as hard as y'all this day in time.
Wear some gloves save your little hands. 👍🇺🇸
I enjoy your videos...I enjoy seeing young people being industrious and hard working.
You guys must have great parents!
Those semi-finished boards (one straight edge, one live) would make lovely shelves.
Makes fun siding too.
Y’all make some interesting and educational videos. I enjoy watching y’all!
Great video. Great explanation. I appreciate it. Nice music choice.
Looks like a very awesome piece of equipment to have. Thank you for sharing. Have an awesome weekend
Make me remember when I work in a saw mill for a year. Just like the saw boxes I sorta used. Keep working hard ladies.
excellent content and videography as usual!
Thanks!
Good job young ladies. Take care and have a blessed week. See you on your next video.
@Wayne Dawson At school learning English, which is _where_ you should be.
There's no reason a sawmill cannot be run entirely by women, except in your teeny tiny brain.
@Wayne Dawson 🤣
You girls work hard. I hope the boss pays you well.
I hope they are the boss.
@@fordguyfordguy Their Dad is the boss.
@@fordguyfordguy You're probably crying like a little child right now.
Oh grow up, can we keep UA-cam comments troll-free for once ffs.
Love that braid!
If I haven't seen Samantha and Jade laughing properly in a while, I just watch older videos of them. And voilà, there they are... kinda cool.
Always cool stuff! Keep em comin LCLY!
Very good explinations, everything makes sence. Thx
This is a really cool video. Very well done. I had to watch it three times.
Thanks for the peek into your operation. Love to see family owned / run businesses. Very nice editing on this one. Keep up the good work!
That's just beautiful
BEST LOOKING EDGER CREW i'VE EVER SEEN.
Yep, there we go.
You couldn't possibly comment on their competence and knowledge, only their looks.
You pay attention when you run the edger. Kickbacks can kill you. My dad ran a edger at a big sawmill in Illinois and it kicked back a board so hard the dogs didn’t stop it. He got hit in the stomach and it almost broke his back. He was down in the hospital for a week and didn’t go back to work for 2 months. A second set of dogs would have protected him. They installed a second set in front of the first ones and never kicked back like that again. Stay safe and great video.
The dad behind these two beauties must be one proud papa!!!
Edger is certainly nice if you're going for production. 800bf is a big day for me working alone, and I turn all mine up on the saw to edge.
Y'all are two hard working young ladies. I enjoy watching your channel. My wife and I are planning to go into the mobile on site sawmilling business we have LT40 super ordered that will be here in December.
I’m doing the same thing! Got a LT40 coming next April
@@AlmostItalianBrothers I ordered mine about the second week of February it was a 39 week wait then. When I was in high school from '95-'99 the ag. dept had a woodmizer that we milled lumber on and I have wanted one ever since. I have not ran a mill since then but I have always kept up with the technology and I always look at all the mills when I go to the Mother Earth Fare every year. I have the opportunity to take different deduction in life so I am going to go at it wide open. I am doing all the research I can before the mill gets here so hopefully I can hit the ground running.
Nice, same I’m trying to learn as much as I can! Any really helpful info you’ve found let me know!
I'm a rough framer . Love the video 👍🔨🪚🏠
so that's how you cut a lot of your batons on the narrow stuff that is the neatest machine I ever seen I've never seen one before but I'm just a carpenter I've never ran a sawmill except my dad's little sawmill in the pasture
That's a time saver for sure.
Awesome video thanks
Awesome video, thanks.
Good looking lumber and edger.would love to have one do do my lumber been cutting for 3 days
you are a great video maker
Thanks again 👍
Nice looking lumber and beautiful looking women. Thanks
Cool machine and process…
These are my kind of girls. you go girl
Great video effects girls, keep them coming, thanks
Pretty cool stuff
Great video, I like the background music too it adds a nice touch, speaking of touch i would wear some gloves. I find it helps with your grip and preserves your hands.
Awesome video
You girls are fantastic your dad gave you a good work ethic you work so hard I hope you both find Good Men that will be your equal 🐝✨
Wow, this is good stuff.
Love your voice. If milling doesn't work out you need to look in to reading and recording audio book..lol
**Think** about 1" tomatoe stakes for selling to local gardeners at Farmer's Markets; that way you are using everything except the bark of your log.
When I watch your videos, my hope for the future of America is restored.
Impressive ladies, tough but gentle. 👍🏻
Fantastic machine... damn nice two girls operate it👍👍
There's nothing more attractive than a women who does physical labour and is smart.
Thanks for the education on the machine.
I like the video! Going to check your other videos!
One note though: Maybe you should keep your microphone a little farther away from your mouth, sometimes you can hear squishy and popping sounds.
You have such a calm knowledgeable voice, which is part of the alure to your chanel. Love watching u girls at work
Pretty awesome, never heard of a machine like this. Does this save a ton of time over making cants on a sawmill? I assume it's an efficiency thing eh? Pretty neat :)
Side note. In South Louisiana a flitch is a wet fart that leaves debris where you don’t want it. This is the first time I’ve ever heard this word used for anything other. Now I know!!
😂
Glad to be of service
Great video! What was the music playing at the end?
Strong young women! 👍
you guys seem to be doing well without one, buy where I worked when I was young, they had a shadow box. It cast lines onto the board, so the operator had a better idea of where to put the board.
Some beautiful gals making beautiful lumber! I would love to be able to do this!
i did this with a deck this summer , when wood was 300% more expensive , saved him a bunch of money
I'm a Tennessee mountain boy, currently stuck in the city, and good Lord do I miss seeing women like these two. Strong, smart, hard-working, resilient, modest, and beautiful...but can stand her ground. Ladies, if you see this comment, keep up the integrity I. Who you are and your morals. These girls today need someone to look up to
Thanks for the compliments! I am a country girl and know that I would be miserable in the city, I wish you luck!
@@lumbercapitallogyard yea, I go through everyday thinking how much I hate it here, but hey, the mountains still remember me. Thank you, and God bless
@@lumbercapitallogyard yea, I go through everyday thinking how much I hate it here, but hey, the mountains still remember me. Thank you, and God bless
There's some real working women! Would love help like that at my sawmill business!
Im here for the tech you guys...
Hey guys, awesome videos. How about some blade maintenance videos?
Yeah! We will definitely keep that in mind.
health and safety is a good thing to learn
Great job especially the narration. Sounds professional... But why no gloves?
I like watching super models running a mill its great i hope you hand is ok Sam. nice knife
How does it square it up when you have live edges on both sides ? Great job on your videos by the way very informative
Most have a fixed circle blade on one side and one you adjust with a lever on the other. Some have fixed notches for 4-6-8-10-12" widths, others you simply eyeball the moving blade to the board and let it rip.
You two young lady’s work harder then a lot of man I know they would be crying cause it’s to hot it’s to cold I’m tired I’m hungry the excuses just go on and on so good job to you
Was wondering if your operation has looked at adding a lucas mill. Does a great job of milling the 1x , 2x 4x and 6x and even 8x with the bigger blade , without the need for an edger. But that edger looks like it would amazing for the live edge siding.
I raised five daughters in the country so ladies if your in the wood yard put that hair up or stay out of it...
If you get caught it will make you permanently ugly quick !
Stay safe and don't take chances on fate or you will loose one tragic day.
How do you avoid splinters without gloves?
What do you do with the sawdust??
Can you tell us what model edger is! And power?...Thanks..joe
Pura vida amigas that machine will be a dream in my country because I could work with cocobola. Cedro .ron ron fine precious wood lumber from my country pura vida
You have me convinced. Now if you'd like to gift me one...
Alternative video title: "Why it's good to have money and why you should have them" 😁
P
@@nonparticipant4671 P
If you have a board with bark on both sides (a flitch?) how do you line it up for the first run straight through the edger? by eye?
How often and difficult is it to clean
Wow, that’s useful! What do you do with the excess wood that you don’t use coming off the edger? I would think it would be nice to chip. This operation is so cool, I still can’t get over it! Do you plan on posting videos more than once a week?
I know right? You will definitely want to consider getting one along with your LT40.
I only post on Sundays but don’t worry I will definitely make those LT40 videos you have been wanting!
Yeah I’ll have to look into it. Thanks, your the best!!
How refreshing to see a couple of gals actually showing skill and doing the work, not dressed like Instagram models just trying to exploit their looks for views.
Exactly! I actually find this much more attractive in that aspect to be honest
Are both blades powered off the same motor?
Will you please highlight the reasons that you chose to move onto the Lt 40 from the 35
What did you gain, and why was this necessary? I currently have a woodland mills Hm130 max, looking to move up to a LT 35. But would like to know more about why the LT40
We have grown significantly as a business, we started out originally with an LT15 and have upgraded as we have grown. The
LT40 has a much bigger engine so it can go a lot faster, it also has a board drawback so it is a lot more efficient because the swamper doesn’t have to walk around the mill to remove the material.
I hope that helped!
Beautiful!
Watching you guys reminds me of what loosers my nephews are.
It would be a gift to other girls and women if you could grow enough to take on female apprentices. So impressed by your knowledge and hard work.
How about take in some male apprentices? Or are you just that shallow and sexist?
Tell the boss that he has a wonderful family.
Do you us a text to speech software for this video?
오랜만에 보는 ... 노동의 신성함...
이거 잊은지 너무 오래다
I wish you ladies would wear dust masks. You will be happy you did way down the road.
seems like she is good at edging lumber
You need a roller on top of your edger for pass backs
Great video, very well explained. What's not to like? Wood and women? I'm in!
Have you thought of have muti disc saws in your edger however I see that your present adaptation as just a contingency and definitely hard work ethics are your family forte = conscientiously viewing
What’s the reason you ended up getting the stationary controls on the LT40? We plan on getting the walk behind controls but what are your thoughts on that? Also we really don’t want to be wearing a mask every time we mill, so do the stationary controls help with breathing in sawdust?
I never had to much trouble with sawdust, even running the LT35 which you had to walk behind. But it does help with sawdust a little, especially on windy days!
Ok good to know thanks!
Just an idea get grandpa to put a roller on top
I hope the young lady's right wrist has healed up ok. Can dropping boards roughly cause cracks to form?
It can if there is already a weak point in the wood, other than that, not really.
@@lumbercapitallogyard I hope you will produce an annual calendar with each of you featured in one month. I'd definitely buy one.
I reckon y'all could sell a lot of bean and tomato sticks. Maybe you already do.