The Edger Conundrum… what should we do because this won’t work!
Вставка
- Опубліковано 6 сер 2024
- #edger #LT70upgrade #dancing #lumbergirls #woodmizer #logyard #lumber #familybusiness
SOCKS!!! Use this code to get %10 off www.camelcitymill.com/TERI13280
Discount code TERI13280
VISIT OUR WEBSITE!
www.lumbercapital.com/
MERCH, MERCH, MERCH! Find it here 👇
lumbercapital.shop
Interested in extra content? Check out our Patreon! / lumbercapitallogyard
Follow us on instagram @lumbercapitallogyard
You can further support our channel by making a donation! spot.fund/O56XSG - Навчання та стиль
Ah! The dancing Sawyers are back ! Simply beautiful. You ladies are really special.
You need a infeed deck raised up so you don’t have to lift each piece as you feed it into the edger , we had rails with small rollers on the lumber pilling end of the mill , you placed a piece of u-channel on the roller rails , and piled the lumber on top of the u-channel , when the pile was complete , you rolled the lift of lumber away , giving yourself space to pile another lift . Eventually the forklift arrived to remove the completed lift of lumber . We also used the same system to feed the planer mill . 👍🇨🇦
Em calling Jade out about her skills breaking the beam 😂😂
Big sis throwing little sis under the lumber truck 😂😂
Happy and Blessed Easter to the Breon family, friends and viewers.
I remember seeing your first videos, when you only had a couple thousand subscribers, and were so nervous in front of the camera. You both have come a long way. The pride your dad must feel for all the hard work you both have done! As a parent, I can say we all hope out kids turn out even half as well as you have!
I'm sure mom is proud too!
I have been a long term sub as well and its amazing to see this family flourish.
@@larryrussell4905 lol. Think you for policing his lack of inclusivity.
I agree with Clay, it should be beside the new mil. As the wood comes off the mill Jade moves to her left and sends it back towards Emerald's right. A circle of efficiency.
Sorry, won't work.
Edger inline with off table. Today, Jade slides the flitch all the way and throws it in a pile. Instead of walking 15 feet, she puts the flitch on the edger and still walks to the end, removes from edger, throw it in the appropriate pile, walks back to get next board off mill
@@smisky1086no matter where you put the edger, there is no time for Jade to use it and still keep up. so the flitches have to wait in the infeed of the edger with the edger at an angle off the end so it can go along side the building. Some hooks on the mill return would make it so Emerald can carry the board to the end with the mill; no walking around to get the flitches.....
Time to get Grandpa off the grill and back on the line! Or Emerald needs a hard working boyfriend.
@@Hoaxer51Emerald already has a hard working boyfriend: likely running the Bells 2000 at full blast.
The way we saw up here (western Quebec) when the logs are being sawn to a consistent width, is to do the edging en masse on the mill (LT 40). Logistics - the science that makes a difference in real life.
Damn that Jade is stoic
Works hard makes it look easy.
If I was twenty years younger,
I would work for free to have these awesome Bosses.
Thanks women of tomorrow you kick ass.
Raised the bar for all of us.
America`s First Sawing-Mill Dance Company ... Great. 🤩
Today is beautiful day..the smile of jade and emerald looks sweet ,holy crap 😊👌
8:30 am ... HI I'm enjoying your video and I'm falling in love with the redhead lady logger ok.
I like the pony tail look, maybe Jade would also like to try it!
The best solution will be to build a big enough shed to house the mill and edger ...it's money , I know..but it will protect your equipment and be much easier for y'all , working the station
I like the idea, but I think it would need to have huge doors on both ends, either overhead doors or sliding or even double swinging doors, in case they have problems or need to get it out again.
Not going to happen at this time.
@@AJfanboy1 just a cover , ..many people have mills with covers ..you don't want doors or obstacles , you want to be able to bring in logs and move large materials ...but a roof is very important for running a milling operation
@scottsoper just because youre a simp doesn't mean you have a clue beyond what they said in the vid already. Sad.
Maybe time to grow. If you want production? Hire more help.
I was fascinated by your dance today! You have turned your workplace into a stage. Seeking a new style. That's so cool.
😃💃💃
Hats off again to the hardest working family on UA-cam.
The 2 most beautiful sawmill operators, ever!
Us old timers measured the square footage and shape that each machine in the yard takes up, as well as the total area and topography that the yard has.
Then scale down everything to the size of a game board and cut the outline of the machines out of different colour paper.
Also, find a roll of paper and do the same thing with the yard.
Now you can easily move the "paper machines" anywhere in the yard as many times as you like until you settle upon the perfect arrangement without having to repeatedly move the machines themselves.
This is a good idea. I did not do it just like that but it is a good idea. This method may be helpful Laying out where the lumber goes for sale out by the road. That is part of the over handling problem and needs fixing.
Try to set upa credit course with the Board of Education that offers a Practicum in logging an lumber yard operation.
It's a win-win situation.
Kids get experience on all the machines and you get cheap labour.
@@royalbrecht7043 I don't know the opinion of LCLY on this idea, However I don't want anyone around those machines other than family. Particularly I don't want kids that have not grown up with machines to be around on the log yard at all!!
Surely you can replace the beam that Jade busted or "sister" it up with another to support the overhead. With the new 70 on line working at an increased rate crew limitations you have an optimization problem. If you need to run the 70 at max caplacity with crew of two, then you need to calculate trade off benifit of standing down early in day to run the edger with the same two crew (Jade and Em). This is a labor resource constraint problem that you need to solve for maximum profitablility of product. Bigger businesses deal with this all the time and good number crunchers in operations could help you...if you had someone to help. Talk to people you know and trust and see if they can work it for you. The dance routines are nice and I am impressed with what you can do in work boots!
I would just stuff it with wood glue and put a few clamps on it, then when its dry put a couple of short bits of angle iron underneath and drive in some stainless steel screws. however I’m in England and don’t know much about joinery if anything but it would fix it (i expect)
@@TheGrimReaper1 wood glue, 1x4x4 on top and bottom with GRK wood screws. no hurry, bottom of the list of things to do.
Might I suggest putting the mill and edger side by side with the edger reversed. Jade could catch at the mill then immediately feed the edger. In turn you could catch at the edger, stack and run the mill.
My idea is line the edger parallel with the mill opposite of log deck. Mill operator (Emerald) as soon as the mill head is returned to the start position without dragging the flitch off, Emerald pulls the flitch feeds it in the edger. Jade can tail the edger and then return back to swamping the mill. Both Emerald and Jade will be moving together from mill to edger and back to the mill.
Ladies stay safe. Happy Easter
U girls rock, keep makin us proud to b AMERICANS n the golden uniqueness we all hold, everyone n ur family is a positive influence from gramps to Judah, when I watch ur videos they make me PROUD TO B AMERICAN !!!!!! THANX
You two are nuts and I hope you never change.
God Bless
I ENJOY,your descriptions/explanations,good job
Y'all are awesome. Keep up the good work! It is inspiring to see young people doing work.
Stunning hard working ladies!
What a fun video. You girls are the best. Beauty,talent and hard working.
Love the dance routine. You girls have got it going on!
Awesome work accomplished today!!
Amazing dance
routine!
Enjoy your weekend!!
👍💃🧙♂️🐺🕺🤙
I reckon that the strut got broken because Emerald was drinking a bucket🪣 of coffee☕️ instead of spotting for Jade😁! Have fun with getting the setup right. At least you are working in your yard, as opposed to some of the house sites I have worked on in my nice hilly city. Cheers from NZ🇳🇿.
Em,Try unleaded coffee.
Take the edger and remove the Convery off the feed end and but it up to the outfeed table on the Lt70. as the flitches leave the LT70 then they can be slid through the edger and put on a stack. Thanks for the video ladies, happy Easter and have a wonderful weekend. TTFN PS. Love the dance routine!
not too bad an idea. One could not adjust the second blade in the edger so all the cuts would be the same. However lets leave this job for latter.
The production challenge is the edger has to process as fast as if not faster than the mill - Especially for a tandem operation.
I amend my comment to: that will not work.
@@michaelfoster2563The edger has to be separate from the mill to be operated correctly.
Unfortunately, in my opinion, there is not a quick fix. I don't see that edger keeping up. It's a great machine, just not in the same league as the 70. That is just a pure beast.
You guys a hilarious! Way to make it throught the work day! Far-out! Intense, and ever so graceful!
quick to learn congrats. Proud of you all. Love my Little Buddies.
Ladies!!
You all always make each video interesting and informative. Thanks for including the dance moves :)
I could have sworn, I saw the doggie's expression like: "Is it my turn to dance yet??"
Thanks for all your continued hard work ;)
Em, your hair looks terrific, very pretty, and it’s out of the way!
Princess quality!!!
Wow thank you for your video, the up keep and inventory at Lumber Capital is amazing…. I love the way your hair is put up. gorgeous lovely ❤❤❤❤
Oh my I just can’t wait for summer, the spring is looking good 😊🎉
What's hard to ignore is how beautiful these sisters are.
And they're damned good at their jobs.
They are smart and are both good girls too. That's probably because they come from a well structured family.
She seems like a wonderful wholesome person. 😇
Can you put the edger next to the mill (parallel) but in the opposite direction?
Then Jade can put the boards on the edger and they come straight back to Emrald for stacking. Distributing the extra work.
Not sure if that works out space-wise. You probably also need some room to stand between the mill and the edger.
Wonderful. This is terrific.
Great Performance. You girls are looking good. Happy to see Jade smile.
LOVED IT ❤FAMILY FUN FOR ALL ☕️👍📹👌😉FROM 🇨🇦
No worries Jade..........the brace is easily repaired.
The dance segments rock.
That's an inexpensive and easily replaced beam, Jade. And if you don't have one in stock, maybe you could ask Em to strap herself up there until you cut one, in payment for the under-the-bus trip she gifted to you. ;)
Perhaps the rite answers will come in time. Nice work in the mean time ladies!❤
great job love the videos have a great easter
Move the edger so theinfeed stacks are right by the outfeed from the mill. Don't move the stacks until they run thru the edger. Shut down the mill about and hour of so sooner and run the edger then move finished wood only. No flitches on the forks.
Jade, that cartwheel was impressive!
We have similar ideas. let the flitches pile up right by the infeed of the edger. run the edger when the pile gets big. They can't run both machines at the same time. no moving piles to a new machine.
Still need a Shed / PoleBarn Structure. You have Most of Everything you Need.
@@ronaldbrown7780What is needed right now is to get production correct. Worry about the roof later.
Jade, absolutely love it when you coffee and work with 1 hand❤ Cal
Consider rotating the edger by 180 degrees to create a more linear production path. Positioning the feed end adjacent to the mill's output could reduce Jade's steps to just one or two when loading the edger.
Have you asked Wood-Mizer's head office to look at your situation? They see hundreds of operations and setups and will advise you on becoming more effective. Good video yet again 💪👍🫡
I like the dance routine at the end of the videos. You go girls.
A big pole barn to house the equipement might be in order. Just a roof and walls to keep the cold wind in check. That expensive equipement including the girls will last longer.
And a wood burning stove to keep it warm in those cold winters. Fuel would be handy to keep it going. 😂
Turn the edger 90° and put it at the end of the mill deck. That way Jade can remove the scales of the first cuts, run the following flitches through the edger (at a fixed width) and then , as normal, just take the finished boards of the saw deck. That would mean three pallets down by the deck. One for scales, one for sawn lumber and one for edged lumber. Guess the one for scales would have to be in the middle so Jade can put the offcuts from the edger on that pallet too.
Jade won't have time to deal with the edger; the new mill is too fast.
Emerald, thanks for asking us for ideas. The first idea for your dad would be forced overtime. once a week everyone work till midnight. That should catch you up in a month or so. Second would be putting your brother to work now. Don't video him for a while and he'll probably be old enough to work by the time the authorities catch on. Third would be to add another edger. Seeing you work that edger easily with one hand while drinking coffee makes it a no brainer. I think Jade could handle the other end of both edgers with ease. Have your dad contact me about more ideas. Instead of running from position to position, you could dance from place to place and sell tickets. It would easily pay for an extra employee or two.
You both are amazing work ❤️ 😊
Put the edger in the optimal spot to feed it right from the mill, then make a new roof that covers the edger and the mill. They both need to be covered.
yin / yang it with the mill! one is pulling off the mill and onto the edger, the other is pulling off the edger and running the mill. It'll be a bit of a dance but you two could figure out the timing
@LastNamefirst-wv7jj I fully agree with you!! If they can run the mill at full speed and do the edging as needed (not necessarily waiting for Friday) They will still get more lumber made than before.
Funny, born and raised in Long beach CA. barely know what trees are. But its awesome to learn. Thank you for the help and education.
Great video, makes my break time nice. Thanks to your dad for the lesson on chainsaws. Was one of the best.
If you can arrange the edger alongside the mill so that the boards can make a "U-turn" or side move if they require edging you will save much space and get a nice work flow. Boards not needing edging can go straight to the pile off the mill. The only thing to solve is to get some sort of saw dust removal to avoid having to work between the machines. Having them alongside each other is also beneficial if you later on want to build a roof over the machines for better weather protection.
If you cannot have the machines alongside each other, try to think of an right-angle turn instead, but this requires more "floor"-space. The aim should be to have both an efficient work flow and avoid as much manual handling (lifting, twisating etc,) as possible Using ball rollers in turns are very efficient.
Your missing the point. The new mill takes 100% of Emerald and Jade's time. This edger can not be used at the same time as the mill without a third person.
@@scottsoper Thanks for pointing that out. I had to see the video once again and yes, to be able to get a good flow from log to board there is a need for a third person at the outfeed end of the edger. I got focused at getting a good flow from mill to edger and missed the edger outfeed aspect. Sorry for that.
I love it . Fashion model Friday ,you look stunning Emerald .
You must return the output of the edger to the mill end to share the labor time. That said. Lumber Capital Log Yard family thanks you. Your presentations make me feel more like family than viewer. Not many can make you observe, think about a solution and smile about it. But, coffee while your sister labors? LOL!
Love your hair Up. Cut boards in the AM and take whatever time needed to do Edger work each day.
At the end of the week, done and done. Love the Dance Steps and leaps and everything! ♥
Third person would solve a number of issues.
I’ll tell you what works: Emerald with your hair tied up! You don’t have to hide behind those long locks, both you and Jade are ‘all growed up’ and you deserve to let off the steam with a few dance moves at the end of a busy day. Keep up the good work!
good to see that you enjoy the work so much. and nice dance moves. 😘🤠🌻🐝🇳🇱
I like the 3/4 turn towards the camera.
You two young ladies are absolutely beautiful and amazing ❤❤❤❤❤
You both tie your hair back, your beautiful
Calm down
Jeeeeeesus emerald looks phenomenal lol
She,s pretty all the time but in this video she was lookin very fine.
@LastNamefirst-wv7jj you need a life..there's nothing creepy about what I said.. but I guess in your twisted mind there is...oo well!!
And i,am curious just how old do you think I am??
@LastNamefirst-wv7jj i,am not even close to 65..not even close..wish I was tho then I could retire.
I,ve just worked way too hard and had several accidents and health issues that made me look old..one accident was a chainsaw ripping my left arm wide open.i got lifeflighted that day.
I,ve survived five vehicles wrecks,a bloodclot in my lung,a very bad septic infection..it took a toll on me for sure and took alot of my memory.
@LastNamefirst-wv7jj Yes they do make these videos based on their daisy duke shorts, Zero protective gear and appearance ...They want to be recognized and sell their souls to hollywood...
Great video! I just don't know how you danced so well with those boots. Awesome 😊
keep up the hard work and keep moving foward things are going to get better ..
If you girls had boyfriends you could put them to work and have 4 people running the mill process instead of two.
Thanks for sharing 🍸 and for the half-time show🎉
Loved the energy!!!!❤❤❤❤❤❤
Put the Edger to the road side of the new Mill (Parallel to the Mill). As the wood comes off the Mill, Jade slides it directly across and feeds into the Edger. Edged pieces of wood will end up back with Emerald to clear off the Edger to stack. This will reduce the walking issue you highlighted you currently have due to the length of the Edger.
Will not work. There is no time to be messing with the edger while running the LT-70. It will be a challenge for Jade to even get the lumber stacked.
@@scottsoper Nonsense! Clearly you have never run the LT-70 before. I have run it now for last 2 years and it works perfectly in this setup.
@LastNamefirst-wv7jj what are you talking about? This is complete nonsense. You have never been around nor used a Mill.
@@paullynch277 LastNamefirst does seem to understand motion and that is all that is needed to solve this problem correctly. You may use some other system but you will not be getting the most out of the mill.
@@scottsoper you are clueless.
You do need another person!
My favorite milling team I think you'll figure out the edger situation I have faith.
Loved the trippy dance interlude!
Great idea to throw in those little dances. Such fun
Love the little dance at the end
Set it up at the back of the mill. So when your board returns to you, you can go from there right into the edger
A simple solution is a belt drive conveyor placed between the equipment with a feeder on the output to send lumber into the edger. its done at most factories to automate some steps in production. buy a used one to begin with to save money.
Well done Ladies!
Nice spring day is there so dancing on the way
Wow, you out did yourselves! Great video!
you gals bring a new meaning to sawmill choreography
Dance routine is back, awesome!!!.
Not sure your logistics when it comes to the flow.
Only been there one time and I think I can envision what you're referencing but a diagram of current setup would be really great to figure this out. I'm sure ya'll already thought of that though. Carry on.
Great video Emerald and Jade
I’m with other folks advising moving the edger closer to the mill, or vise versa. Yes, you said the mill is bolted to a concrete pad but if there is a more efficient way to do things it may have to be moved. Think of it like a kitchen, where you have have 3 major places to get to: food storage/fridge, food prep/counter space + oven and cleanup/sink. A work triangle is most efficient where nothing is more than a step or two away.
Working with 12’ boards expands that triangle and distances that have to be covered, but same idea. If you have to have the mill & saw 90° to each other, then maybe add a roller table or two and get an electric scooter or Segway so Jade can zip back and forth. Or a couple so Em can buzz down to help load the edger.
Or like other folks suggest, incorporate edging each day instead of just Fridays. So, 6:24 sawing and 1:36 edging. Assuming y’all work an 8 hour day. Good luck! 👍
Good to see fun in the work place from Australia
Your fashion for this episode was exquisite.
You can get portable shelters that use aluminum conduit frames. Put the edger wherever it works best. Nice dancing!
Where there's a will, there's a way. I love watching ya'll.
Dig the dance too. ✨️🙂✨️
I ENJOY YOUR CHANNEL AND YOU GIRLS DANCING! THANKS!
The Wood Dancers...That dance reminded me of daft punk "around the world"! Awesome job with the planer and dance moves! 😊😊
Love you girls- great video - pleasure to watch! God bless - keep up the good work - it will pay off for you! From Texas!!
Hi, I always knew Jade could bring the house down. lol I've never been a sawyer. However, if it can be done, you and Jade can figure it out. Good luck and thanks for the video. 🙂
Great workers and awesome dancers. ❤️👍
Such energy i love it you go girls
One armed edging!
Great dance!
Acrobatics - with a needle!
Best video ever.
Look up woodmizer at the boonville ny woodsmens feild days on UA-cam.they have a couple videos where the edger is next too the saw..there again you use conveyors to move the lumber..it goes in a U shape.
No edging solution but much respect to both of you for your hard work at the mill . Makes me smile watching you two ham it up.
Great dancing at the end👍🏻🤣
Wood Mizer has a customer spotlight video on a large mill with additional conveyor and the edger at the end. You basically need more room. A shed roof over the entire operation would be helpful, but again more money.