do you let the superglue dry inside the peg base or you dry it outside? too scared to superglue it. all i did were put nail polish at the end but it doesnt work. i try double coat it today and waiting it to dry tomorrow. hoping it works
I had the same issue with the heads but I used a nail filer to slightly trim down the ball end of the neck peg so the heads can fit easier. They now fit a whole lot easier!
Is she a durable figure and have mass weight and is she bulky in hand? I dont like hollow plastic and skinny figures.. but this figure looks so beautiful. I hope I can get one.
Storm needs to re-release this very badly! Such as the hair pieces just keep falling off! Do what SH figuarts has done with thier long haired characters add ball joints or something please Storm C!
Maaan I thought it was just my figure...I literally and filming my review right now and had to stop cause of the very same peg issue on the head. This is frustrating as hell I am waiting for my super glue to dry now so I can continue with my review...Storm has really bad QC issues with their figures and they need to be fixed. I have a Storm Collectibles Mike Tyson review and his left leg keeps popping off. It popped off in the middle of my review just like Chun Li right arm did with you. The sad thing about it is their customer service really sucks bro.
Hey man just got my NYCC Chun Li today and boy oh boy there is a lot of issues with the head/neck. On mine the joint actually keeps popping out of the socket and get stuck on the head hole. So once I get it out I can plug the joint/pin back in but it’s just gonna happen again once I take a head off. Plus my shouting head doesn’t even want to grab onto the peg. Nothing I do works. So what you did was glue the bottom peg into the socket with super/crazy glue? Because I had that idea too but was afraid to attempt it in fear it would hinder the articulation.
IamMedellinInc I pulled down the soft plastic applied a little super glue and let it set. After it dries pull the soft plastic back up and pop on the heads. The joint that is under the neck peg allows movement.
Hey man I did your super glue idea with mine and so far it worked! Peg stays in the socket and I still have good articulation in the head/neck! Hope it stays this way as time goes on. Btw does your figure's shouting head not stay on too good?
you are lucky i wanted one of her but shcc is next so someone buy the red battle costume get two and send me one unless you have two on her black dress aka hot chun li please i just want one of her ok but good work .
My ball peg wasn’t attached to the neck either, tried warm water but to get it in the neck and it worked until I tried to pop the head on, then the ball peg popped out Wtf Should I contact storm collectibles about this?
Toy Migos how would you suggest contacting storm collectibles? I emailed them with the address on their official site but idk if I will get a response.
I wish I got this figure. It looks great.
do you have a tutorial or link or somethin else on how to fix that neck peg? I am thinking on buying that figure
Seconded!
do you let the superglue dry inside the peg base or you dry it outside? too scared to superglue it. all i did were put nail polish at the end but it doesnt work. i try double coat it today and waiting it to dry tomorrow. hoping it works
I put a drop on and keep moving the joint until the glue hardens
@@ToyMigos how do you tell when the glue harden?
she looks pretty good, those legs are massive lol that ab crunch is insane! great review!
hot cheeto fingers thanks!
I had the same issue with the heads but I used a nail filer to slightly trim down the ball end of the neck peg so the heads can fit easier. They now fit a whole lot easier!
Is she a durable figure and have mass weight and is she bulky in hand? I dont like hollow plastic and skinny figures.. but this figure looks so beautiful. I hope I can get one.
Very well done review! I have also ran into problems with neck joints from storm figures glad to see you found a way to fix it
Storm needs to re-release this very badly! Such as the hair pieces just keep falling off! Do what SH figuarts has done with thier long haired characters add ball joints or something please Storm C!
Dude I'm pissed with this Chun li figure. I have the same issue with the head. So what's the best way to fix it.
Maaan I thought it was just my figure...I literally and filming my review right now and had to stop cause of the very same peg issue on the head. This is frustrating as hell I am waiting for my super glue to dry now so I can continue with my review...Storm has really bad QC issues with their figures and they need to be fixed. I have a Storm Collectibles Mike Tyson review and his left leg keeps popping off. It popped off in the middle of my review just like Chun Li right arm did with you. The sad thing about it is their customer service really sucks bro.
Too small for the price! Neca would of made this figure bigger for $132.
I had the same problem iam very upset this figures are to expensive not to come intact very disappointed with storm collectibles
Hey man just got my NYCC Chun Li today and boy oh boy there is a lot of issues with the head/neck. On mine the joint actually keeps popping out of the socket and get stuck on the head hole. So once I get it out I can plug the joint/pin back in but it’s just gonna happen again once I take a head off. Plus my shouting head doesn’t even want to grab onto the peg. Nothing I do works. So what you did was glue the bottom peg into the socket with super/crazy glue? Because I had that idea too but was afraid to attempt it in fear it would hinder the articulation.
Cmarra95 ya I glued the bottom part of the peg in
Toy Migos how did you get the ball peg in the neck?
IamMedellinInc I pulled down the soft plastic applied a little super glue and let it set. After it dries pull the soft plastic back up and pop on the heads. The joint that is under the neck peg allows movement.
Hey man I did your super glue idea with mine and so far it worked! Peg stays in the socket and I still have good articulation in the head/neck! Hope it stays this way as time goes on. Btw does your figure's shouting head not stay on too good?
Cmarra95 awesome! I'm glad it worked! The yelling head fits fine on mine
you are lucky i wanted one of her but shcc is next so someone buy the red battle costume get two and send me one unless you have two on her black dress aka hot chun li please i just want one of her ok but good work .
My ball peg wasn’t attached to the neck either, tried warm water but to get it in the neck and it worked until I tried to pop the head on, then the ball peg popped out
Wtf
Should I contact storm collectibles about this?
IamMedellinInc yes. Everyone should
Toy Migos how would you suggest contacting storm collectibles? I emailed them with the address on their official site but idk if I will get a response.
Great review!
It's a shame that Storm is dropping the ball on QC lately. Almost reminiscent of the Sota SF line.