How To Permanently Remove A Zone That's Not In Use Anymore.

In Today's video I will show you how to remove a zone that's not in use anymore. So you will not have to bypass it any more. 2 different ways
202 - Zones 1-8
203 - Zones 9-16
204 - Zones 17-24
205 - Zones 25-32
206 - Zones 33-40
207 - Zones 41-48
208 - Zones 49-56
209 - Zones 57- 64

[@rebekahmack1207]

Thanks, very helpful. Worked great.

[@JasonTech]

Thank you!

[@TheHowieM]

If I don’t know what zones are connected to the doors and windows, how can I find the zone number corresponding to each location?

[@JasonTech]

Have someone open a zone (door/window) and a 2nd person to check the keypad.
2nd way is to tone out the wires.

[@TheHowieM]

@@JasonTech Hey Jason. Thanks for the quick response. I did try that, opening the front door next to the device. It displays "Front Door," but not a number. I'm trying to find the number. Then I realized the zones are displayed in order. So I can get the numbers now by counting as I scroll through the zones.

[@JasonTech]

What keypad model do you have?

[@TheHowieM]

@@JasonTech 9057. I figured out the zone numbers by going to the bypass menu and scrolling through the locations. So I'm all set! Thanks.

[@Mr.ShotTV]

How to you rearm a permanently bypassed zone?

[@JasonTech]

You can't, you will have to bypass then arm each time. The best thing to do is to remove the zone if you don't need it.

[@rachelelsner5195]

Is the installer code the same as the master code?

[@JasonTech]

No,

[@raj-qc8xv]

Hi bro we have two zones error change pir but arming pad in issue same pls give suggestion

[@JasonTech]

You changed the motion?
Do the motions light up?
Do you have EOL?

[@dudleycrotz7374]

I have zone 1 as the entry door to our church and in the entry area facing the door a zone 2 PIR. I programmed section 1 with an entry delay of 30 seconds, the middle delay 90s and the exit delay 45s. Here is the challenge. When arming and disarming with the remote control there is no alarm when entering. However if I don’t use the remote, both zone 1 and zone 2 sets off the alarm when entering as if there is no delay programmed. Any assistance will be appreciated as the armed response keep calling when people with access codes enter and the alarm is triggered on entrance. Thanks