How to Replace Shifter Assembly 05-16 Ford Mustang

Buy Now!
New Shifter Assembly from 1AAuto.com 1aau.to/ia/FDTSR00023
A broken, stuck, or otherwise problematic shifter could cause dangerous shifting problems while driving, or leave your vehicle stranded! This video shows you how to install a new shifter assembly on your 2005-16 Ford Mustang.
• Buy TRQ at 1AAuto.com: www.1aauto.com/yt/i/FDTSR00023
• Check here for more videos on the 2005-14 Ford Mustang: • Ford Mustang 2006-14 5...
This process should be similar on the following vehicles:
2005 Ford Mustang
2006 Ford Mustang
2007 Ford Mustang
2008 Ford Mustang
2009 Ford Mustang
2010 Ford Mustang
2011 Ford Mustang
2012 Ford Mustang
2013 Ford Mustang
2014 Ford Mustang
Tools you will need:
• Phillips Head Screwdriver 1aau.to/oasg/1AXAA00013
• Pry Bar 1aau.to/oi5/1AXAA00020
• Trim Tool Set 1aau.to/oCp/1AXXX00006
• Ratchet 1aau.to/oaub/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/oacC/1AXAA00015
• Floor Jack 1aau.to/owH/1AXAA00068
• Jack Stands 1aau.to/owR/1AXAA00065
• Pick 1aau.to/ojd/1AXAA00037
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Ford Mustang 2006-14 5th Gen: • Ford Mustang 2006-14 5...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*

[@lodidave]

I just finished putting in the shifter and only took me an hour because of your wonderful video. Thank You.

[@phylx3079]

Does it feel any smoother?

[@brucehoefferle3741]

Bought 2005 Mustang project car, this has been the bewst site for my needs while I bring this Mustang back to it's original form.

[@todd7619]

Used this today and it was spot on 👍

[@doggychief2751]

THANK YOU, this helped my dad and I so much!!!!!

[@chrisbrown3925]

Everything went as you said! Great help! Thanks!

[@stephaniep1085]

Thank you so much for helping us save money!!!! My micro switch lever arm broke I I everything apart and waiting to get a new shifter

[@DanielRodriguez-zk2zr]

It’s feb 2023 and thanks to you my dude I just saved money 💯🔥blessings to you

[@publiartsolucionespublicit8603]

Excellent Excellent Excellent... Thanks 👍🏼

[@maggiemoosuperglue]

There's an extra clip above the two linkages in my 2014 🙃

[@jacintoacosta9966]

Thanks bud, gonna try this on my 2010, I’m assuming it’s the shifter because I have to more or less wiggle it for reverse but the rest of my gears work good , I already had my transmission fixed so I assumed it wasn’t the problem with gears like it was before

[@julienson2]

Great video, very helpful,Can I change it without doing the adjustments under the car ?

[@rodritejedart]

Excellent 👌

[@ElJefe7771]

My 2012 Mustang is a little different on the shifter linkage underneath the car, it is round not square.

[@sik226]

Appreciate the video. Would car ramps give enough clearance to get to the clips?

[@StephenMcBeth28]

🐐Content!

[@eQuestReviews]

Thank u so much!

[@TRQ]

+KevinTurboX Thanks for watching our video! 1aau.to/m/Shop-TRQ

[@joekrueger4462]

Does the car need to be on jack stands to do this type of job as im concerned that movement of gears such as neutral would have my car rolling back. What do you recommend for doing this at home all tires off the ground? Thanks

[@noahh9472]

I have a 2010 mustang gt can i use a 2011 shifter my 2010 is automatic im having trouble finding a replacement parts are discontinued both parts are automatic ??? Any suggestions ??? Or advice???

[@celinedominguez5744]

Hey did this step by step on my 2014 mustang but now I can’t take my key out the ignition without unplugging the electrical connector, how can I fix that ?

[@AtrociousFilms]

Now where could u find a new console Like the piece u have to take off to take the gear shifter out ?

[@RobertYayo]

When is it necessary to do this repair?

[@jesterofdimensionz]

Seeing him put the console assembly back on without cleaning it first, made my heart hurt

[@Neondeandre]

Is this the repair for a shifter stuck in park??

[@tqmlly]

Hey I got a question. The button that u press to go from park to reverse etc is stuck so I’m not able to remove my keys from the ignition. Is there a way to fix this?

[@tqmlly]

So even if the car is off I’m able to move it to every gear

[@crystaldougherty4518]

How would you retrofit a 2010 into a 2009 to put a more sportier shifter knob on?

[@FernandoFlores-vu6vx]

I was wondering if you have a video on a 4.0 manual shifter

[@brianwilliams6781]

Don't you need to both remove and install the shifter Both in the same gear such as Neutral so the linkage is the same and lined up? Seems like you took out in Park but installed in Neutral.

[@bizzaromicky71]

That's what I'm wondering to not confuse or mess it up to leave it on the park or neutral from the beginning then reinstall

[@abcdefghjijklfgu]

4:04

[@tommyrox]

Should you leave in PARK when starting replacement? I notice when you were removing the shifter it was no longer in the PARK position.

[@vainrush2070]

Its best if the car is in neutral the whole installation process i think.

[@Isjix4410]

i did the entire job while it was in park, don't understand why it has to be in neutral. it replaces the same way.

[@a-customshandcraftedguitar6224]

why doesn't anyone ever show how to adjust the tranny cable. were is that video

[@5.7siah]

Hey what does the 123 or 321 stand for

[@crazybullbunny]

That is the gear that u r driving in