Jordan, you can open the charge flap without your phone by pressing on it as if it’s a touchscreen, sort of like a normal fuel cap, lightly press on the flap and it’ll open (It’s a bit annoying when clearing the car in that area, opens every time the sponge goes over it). The app, the screen inside the car, and the Tesla charger button aren’t the only ways to open the flap. Great vid
I’m sure someone else has already said that you can open your charging cover by tapping it with your finger. You don’t have to use the app or the chargers button.
Coil the cord with larger, but fewer loops. I have the long cord too, even though I usually don't need the full length. My loops are large enough that when I park in my normal spot I don't even have to remove a second loop. It makes hooking and stowing SOOOOO much easier. And a bonus is that with fewer loops the plug is less obstructed when returning the plug to its holder.
Instead of drilling many holes in your wall for ever new charger fit a replaceable panel on the wall that keeps its fixings and you either replace or redrill for each new charger 👍
Use my referral link to purchase a Tesla product and get free credits you can redeem for awards like Supercharging miles, merchandise and accessories. www.tesla.com/en_gb/referral/andrew24855
Hands down the most helpful tutorial I've seen on this topic and thanks for showing the backside. I always wanted to know if their was hooks or if it was smooth and you definitely showed it, been looking for quite a while, a great tut.
"Tesla Wall Connector" I was on my knees with laughter when Jordan mentioned Step Drill and Corey's Joke about 2 Step Mom's 😁 I will always remember his Joke when anyone mentions Step Drill 😂
Tesla Wall Connector. Great channel been watching your content for a while now. Nice to see some down to earth (no pun intended) issues that you guys face on a daily basis. Keep the content coming👍
Tesla Wall Connector you are a pro. I wish all electricians were thorough as you. I really enjoy your videos as they are very informative. Keep up the good work.
If I were British or if you were here in the USA, near where I live, you would be my choice for an electrician. I love how you explain things even down to us non-electricians.
looks like you need to get a piece of sacrificial wood on that wall to screw the chargers to before your house is held up with plugs. top video, waiting for the next
Just a thought on the PEN fault detection- you mentioned that the Tesla Gen3 charge point would cut off if there wasn’t a good enough earth, would this effectively be the same? Enjoying your videos, keep up the great work. 😎
Jordan ,is the penfold unit still required for the new Tesla charger purchased recently? Also do you have any idea the set up for the following - power wall is already installed along with solar panels , does the charger wire direct back to the consumer unit or power wall ?
The only benefit is the radio tag / button to open the cover remotely saving you the time to open the charger door and enabling the charger. It’s neat, but it’s not a CCS or J1772 “Level 2” AC plug. You won’t be able to use the Tesla plug with a non-Tesla. The pins are different to the J1772 standard. There are extensions and sockets to convert them, ie travel adaptors, but the charger has to be enabled manually for the non-Tesla car. Super chargers won’t work, because the radio tag identifies the car and charger remotely for billing. If you have a second car, you may need additional 32A cabling to a second circuit, or a 40A/63A circuit which can be shared/load balanced. This usually requires both EVSE units monitoring each other’s usage with a communication cable (RS485 modbus) and/ or CT clamp to detect and balance the load for each unit to avoid surge or overloading the charger/circuit. This way you can share a Tesla and non-Tesla wall charger in the same garage, only one needs to be the “slave” which compromises charging speed, but if they communicate together, they will usually negotiate the capped charge rate or step down to half so one will take priority, sic If you have 3-phase, you can get ~11kw on the Tesla charger, across 2 wall chargers, as they will talk to each other (RS485 modbus) for circuit/load balancing.
@@artisanelectrics any chance you know what the name of the track is? Also, nice improvement on the gen 3 Tesla charging port. Funny, as I was just telling a mate about a month ago to avoid them as they have such a lack of safety features built in 😂 Also the inclusion of a John ward video in the instructions is just amazing. I doubt there are many people can explain such topics better.
@@stuartandrews4344 Just watch John Ward videos, he explains that. The same comes for earth rods. You not going to get perfectly safe earthing in most cases. ua-cam.com/video/gZVx7GbAwlg/v-deo.html
Great video, lots of useful information. One thing I find interesting is that when you connect to one of these via WiFi, L1 to N, L1 to E, N to E and earth impedance are all displayed. My understanding of an O-PEN device is it monitors L-N and cuts all 3 if it goes out of the window. Given the Tesla gen 3 is clearly already monitoring this data (and more) it would appear quite straightforward for them to include o-pen monitoring via an ota update, which would be a game changer for UK installations. I'd love to hear what you think about this!
Easee is a Brilliant charger, Also in the old wall connector there was a dip switch to select it/tt supply that bypass the TN N-E test the charger does if you want to add an earth rod instead of the pen fault detector.
I´ve used the original part which you clicked out of the bottom, its with rubber seal and everything, just drilled a hole for cabel and smaller one in rubber and it works perfectly
Tesla Wall Connector To get around the swiss cheese wall due to installing different chargers, you could have mounted them each to a metal plate and then bolted that to the wall using the same mounting plugs for every plate / charger combination
Tesla Wall Connector Have been checking your video to see which will be the best charger to have fitted at home. Excellent information in the ones I have watched.
Here's the thing about the button.... 99% of the times you plug in, you've JUST got out of the car. So it's unlocked, and you can just press on the flap. Sticking with my Zappi. :-)
True. The issue isn't plugging-in it's unplugging that's when the button really helps. Having said that Tesla really ought to fix the software so the cable is unlocked when the car is unlocked.
Fair point but I rarely find it an issue. Getting your phone out and clicking the un-lock button is less of an aggro so long as you remember to do ti whilst walking to your car. :)
Jordan - do you realise that to open the chargeport you can just touch it and the flap will lift up? (as long as the car is unlocked) 😉 Still a pain when stopping the charge where the button helps, but thought you might like the tip when charging elsewhere 😂 (PS have shared the vid to the Tesla UK Owners Group too)
Tesla Wall Connector; I love your honest realistic videos; you are fast becoming the foremost installers in England. I’m dealing with an independent energy consultant currently for a summer installation; otherwise I find it all rather confusing!
I had a gen 2 installed in my Florida garage. It took all day to charge, like 8 plus hours. I now moved to a condo and use the local supercharger, less than 40 min. I have a model 3 perf. I'm also glad I got the longer cable when I had the home charger.
This Tesla wall connector looks good. And will clearly complete with the wide range of other connector chargers. It would be good to see you do a comparison between the 4-5 leading domestic wall connectors and also more info about the option of moving to a 3 phase electrical supply, particularly in London.
Tesla wall connector. I’ve just ordered mine and been watching your videos which have been really helpful, winning a Tesla charger would be fantastic seeing as they are currently out of stock!! Good luck everyone 👍
Tesla Wall Connector - What a time we live in to get excited about a charger! Thank you for the insight into the safety systems required for such chargers.
Thanks, wasn't sure if you had to loop the single phase to all phases like some ovens. So only to L1 - Active/Neutral & earth easy, Never heard of the pen fault protection device.
Tesla wall connector. Hoping to get a Model 3 in September and have been following your channel for a while due to your unbiased reviews on home chargers.
HI, Love your videos and the electricians who fitted our heat pump yesterday said they watched you also. Love to have you fit your old Zappi you took off the wall as I collected my first electric car today.
Tesla Wall Connector Would be great to swap out the terrible unit that I currently have, the first unit lasted three days before packing up and it took the company a month to come back out to look at it and end up replacing it. It’s supposed to be smart but it’s that smart that it can’t work unless it’s connected to the internet. The novelty of the button to open the flap rather that messing with your phone is rather appealing too.
HI Jordan - great video and many thanks for posting. I want to install the Tesla wall connector, but have a TN-C-S supply, Earth rods/Mat are not really an option, and from my research the PEN fault devices available for 1Ph supplies do not really comply with BS7671:2018 Amd 1. I'm guessing that the Zappi is the best option? Thanks
Great video, I just got mine and was a little concerned about the two screws in the top and rain, seems like the nook would gather a small pool of water... but maybe I'm just needlessly worrying? Any how thanks again for a great video 😊💪
Very insightful, thanks. I plan to get one when I move. Currently charging off a 3pin through the letterbox. It works fine, just a bit awkward to take out and put away.
Great video, thanks! It's a lovely product but then we have to install additional protection indoors, how exasperating. So the cost is at the same level as other equivalent products from other providers. People will ultimately be considering choices based upon cost.
What amperage circuit breaker do you put in the Consumer unit? Can this circuit be shared with the rest of the garage or does it need to be dedicated to the wall charger? Thanks.
Great 3rd Generation Tesla Wall Connector video. Hope to see it installed at my place. Setting notifications on and a reminder to check the channel on June 9.
Tesla wall connecter .... Nice and informative videos on the wall charger, I could really do with this as I take delivery as a SR+ in a couple of weeks, plus you'd be helping me out doing up my place I just got with my girlfriend. Thanks for the great videos!
Get a quote for your EV Charger Install here: forms.openquote.net/company/artisanelectrics
Jordan, you can open the charge flap without your phone by pressing on it as if it’s a touchscreen, sort of like a normal fuel cap, lightly press on the flap and it’ll open (It’s a bit annoying when clearing the car in that area, opens every time the sponge goes over it). The app, the screen inside the car, and the Tesla charger button aren’t the only ways to open the flap. Great vid
I’m sure someone else has already said that you can open your charging cover by tapping it with your finger. You don’t have to use the app or the chargers button.
He knows, he mentioned that in his other tesla charger video
Coil the cord with larger, but fewer loops. I have the long cord too, even though I usually don't need the full length. My loops are large enough that when I park in my normal spot I don't even have to remove a second loop. It makes hooking and stowing SOOOOO much easier. And a bonus is that with fewer loops the plug is less obstructed when returning the plug to its holder.
Subscribe to our UA-cam Channel for more great electrical content: ua-cam.com/users/artisanelectricsuk
Is that charger capable of charging other makes of car other than Tesla?
Tesla Wall Connector. it must be so liberating to forget about range anxiety, keep up the good work!
Instead of drilling many holes in your wall for ever new charger fit a replaceable panel on the wall that keeps its fixings and you either replace or redrill for each new charger 👍
THE GIVEAWAY HAS NOW CLOSED AND THE WINNER WAS RICHARD COOPER - CONGRATS!
Why don’t you have a board against the wall, then you can Swiss cheese the board instead of the wall of your house?
Use my referral link to purchase a Tesla product and get free credits you can redeem for awards like Supercharging miles, merchandise and accessories. www.tesla.com/en_gb/referral/andrew24855
hey, are you a business that installs tesla wall chargers? because i want to know if you can install mine if i buy a tesla.
Hands down the most helpful tutorial I've seen on this topic and thanks for showing the backside. I always wanted to know if their was hooks or if it was smooth and you definitely showed it, been looking for quite a while, a great tut.
"Tesla Wall Connector" I was on my knees with laughter when Jordan mentioned Step Drill and Corey's Joke about 2 Step Mom's 😁 I will always remember his Joke when anyone mentions Step Drill 😂
🤣
"Tesla Wall Connector" Very neat bit of kit. If I had a charger fitted my wife couldn't say no to a telsa model 3
Tesla Wall Connector.
Great channel been watching your content for a while now. Nice to see some down to earth (no pun intended) issues that you guys face on a daily basis.
Keep the content coming👍
Thanks a lot!
Tesla Wall Connector. Great video, glad to see Tesla up their game, looks a great bit of kit, thanks for showing us the install.
Tesla Wall Connector - super helpful video. No technical blah blah blah but straight-talking insightful video. Thanks!
Tesla Wall Connector you are a pro. I wish all electricians were thorough as you. I really enjoy your videos as they are very informative. Keep up the good work.
“Tesla wall connector” just moved house and don’t have a charger yet and would really like one for my m3
That's a great way to get the comments and algorithm working for you 👏
I think he’s more interested in being the number one Tesla installer in uk
Both will do! 😁
Jordan you look like a kid opening a gift at Christmas! All excited ….
Tesla Wall Connector" cool video , ,making the world a better place, good job mate , every little helps saving the planet
If I were British or if you were here in the USA, near where I live, you would be my choice for an electrician. I love how you explain things even down to us non-electricians.
Hi . Is there anything that stops someone parking on your drive and charging up for free and then pissing off. ??
A gun
looks like you need to get a piece of sacrificial wood on that wall to screw the chargers to before your house is held up with plugs. top video, waiting for the next
Jordan doesn’t care it’s not his house.😀
And a junction box to save the ends of his external cable.
I was also going to suggest some wood on the wall so he doesn't have to keep drilling the wall.....
Seen as that it’s a pretty high load. Does the tethered lead not have to be fully unwound to avoid it heating up?
@@joemoore9991 Yeah you would think so. It's the same reason you are supposed to fully unwind those extension leads that are on a spool.
Just a thought on the PEN fault detection- you mentioned that the Tesla Gen3 charge point would cut off if there wasn’t a good enough earth, would this effectively be the same? Enjoying your videos, keep up the great work. 😎
If you have a TNS system, does the Tesla charger still require Pen Fault Protection
Jordan ,is the penfold unit still required for the new Tesla charger purchased recently? Also do you have any idea the set up for the following - power wall is already installed along with solar panels , does the charger wire direct back to the consumer unit or power wall ?
That should say Pen fault by the way bloody iPad 😂
Still cant touch the Zappi then since it doesnt have built in Pen fault detection.
Or podpoint
“TESLA WALL CONNECTOR” looks awesome, does it charge other makes of EV? Planning to get a Tesla model 3 and a second EV not sure what yet.
The only benefit is the radio tag / button to open the cover remotely saving you the time to open the charger door and enabling the charger. It’s neat, but it’s not a CCS or J1772 “Level 2” AC plug.
You won’t be able to use the Tesla plug with a non-Tesla. The pins are different to the J1772 standard. There are extensions and sockets to convert them, ie travel adaptors, but the charger has to be enabled manually for the non-Tesla car. Super chargers won’t work, because the radio tag identifies the car and charger remotely for billing.
If you have a second car, you may need additional 32A cabling to a second circuit, or a 40A/63A circuit which can be shared/load balanced. This usually requires both EVSE units monitoring each other’s usage with a communication cable (RS485 modbus) and/ or CT clamp to detect and balance the load for each unit to avoid surge or overloading the charger/circuit.
This way you can share a Tesla and non-Tesla wall charger in the same garage, only one needs to be the “slave” which compromises charging speed, but if they communicate together, they will usually negotiate the capped charge rate or step down to half so one will take priority, sic
If you have 3-phase, you can get ~11kw on the Tesla charger, across 2 wall chargers, as they will talk to each other (RS485 modbus) for circuit/load balancing.
Yes as long as its a type 2 socket EV.
@@Toliman. There is, sadly, not a single correct statement in your post.
@@Toliman. In Europe Tesla uses CCS1/2, not the proprietary connector they have in North America.
Tesla wall connector ....you'll have to get the boat over to Dublin to install it but there is a pint in it for ye :)
"UK Entries Only"
TESLA WALL CONNECTOR, I LOVE WATCHING YOUR VIDEOS I ALWAYS LEARN SO MUCH,AND NOW I KNOW WHO TO CALL FOR ALL OUR ELECTRIC NEEDS IN CAMBRIDGE
In the US it says not to add anything. In the US it is called a Ground Fault Circuit Interrupter. To stop the car body from being energized.
I always really enjoy the backing music you pick. This track has such a nice old school hip hop meets modern mash up vibe to it.
Thanks my editor is amazing
@@artisanelectrics any chance you know what the name of the track is?
Also, nice improvement on the gen 3 Tesla charging port. Funny, as I was just telling a mate about a month ago to avoid them as they have such a lack of safety features built in 😂
Also the inclusion of a John ward video in the instructions is just amazing. I doubt there are many people can explain such topics better.
No PEN fault detection with the new Telsa, think I will stick with my Zappi!
PEN fault detection is heavily overrated
@@paulf3353 untill it's not 😁
@@paulf3353 No: sometimes with certian faults RCD won't trip,just read this,saves me typing long reply.myenergi.com/pen-protection/
@@stuartandrews4344 Just watch John Ward videos, he explains that. The same comes for earth rods. You not going to get perfectly safe earthing in most cases. ua-cam.com/video/gZVx7GbAwlg/v-deo.html
@@PlanetCypher_ You clearly do not understand how it works, feel free to educate yourself by the link I posted in another reply.
Tesla Wall Connector... I'm literally getting a model 3 in two weeks (UK). Just saying. 😂👀
you offed the beemer then?
Great car
What is figurative about "getting a model 3"?
On finance I bet.
Tesla wall connector. Great videos, very informative, keep up the great work
Great video, lots of useful information.
One thing I find interesting is that when you connect to one of these via WiFi, L1 to N, L1 to E, N to E and earth impedance are all displayed.
My understanding of an O-PEN device is it monitors L-N and cuts all 3 if it goes out of the window. Given the Tesla gen 3 is clearly already monitoring this data (and more) it would appear quite straightforward for them to include o-pen monitoring via an ota update, which would be a game changer for UK installations.
I'd love to hear what you think about this!
You should definitely test Easee charger.
Easee is a Brilliant charger, Also in the old wall connector there was a dip switch to select it/tt supply that bypass the TN N-E test the charger does if you want to add an earth rod instead of the pen fault detector.
Working on it!
great video as always. maybe we need a Corey's classroom session on pen fault section
detection
Great idea
Tesla wall connector! Love the channel;)
“TESLA WALL CONNECTOR” I first heard about “ pen fault “ devices whilst watching “ danger mouse “ when I was a boy...🤭👌
I´ve used the original part which you clicked out of the bottom, its with rubber seal and everything, just drilled a hole for cabel and smaller one in rubber and it works perfectly
Tesla Wall Connector. Don’t comment a great deal but watch all your content keep up the great work.
Thanks
You’ll need a new wall with the amount of chargers that walls seen
Tesla Wall Connector. Im shocked, you are always amped up in your video's and never get phased by the current challenge......
Shocking.
Thanks
Tesla Wall Connector
To get around the swiss cheese wall due to installing different chargers, you could have mounted them each to a metal plate and then bolted that to the wall using the same mounting plugs for every plate / charger combination
Tesla Wall Connector Have been checking your video to see which will be the best charger to have fitted at home. Excellent information in the ones I have watched.
YOU HAVE WON! GET IN TOUCH PLEASE VIA THE EMAIL ADDRESS ON OUR WEBSITE, CONGRATS!
Congrats fella. I was nearly there with the name
Best electrician in the uk 🇬🇧
Here's the thing about the button.... 99% of the times you plug in, you've JUST got out of the car. So it's unlocked, and you can just press on the flap. Sticking with my Zappi. :-)
TRUE!
True. The issue isn't plugging-in it's unplugging that's when the button really helps. Having said that Tesla really ought to fix the software so the cable is unlocked when the car is unlocked.
Fair point but I rarely find it an issue. Getting your phone out and clicking the un-lock button is less of an aggro so long as you remember to do ti whilst walking to your car. :)
Landlords gonna love all those holes in the wall 😂
You're right, I cringe every time I drill a hole in the wall of the house I own :D
Jordan - do you realise that to open the chargeport you can just touch it and the flap will lift up? (as long as the car is unlocked) 😉 Still a pain when stopping the charge where the button helps, but thought you might like the tip when charging elsewhere 😂 (PS have shared the vid to the Tesla UK Owners Group too)
Before leaving the car you can also say, open butt hole and the flap will open 😂
@@neilarotisiv9384 driving.ca/tesla/auto-news/news/this-is-what-happens-when-you-tell-your-tesla-to-open-butthole
Thanks Alan!
@@AndyK.1 awesome
Does the Tesla Wall Connector gen 3 qualify for the government ozev install grant.
Tesla Wall Connector... Great electrical installations from Artisan Electrics.. Keep charging the Nation..
TESLA WALL CONNECTOR - excellent video, thanks
Tesla Wall Connector - If only they weren't currently out of stock right now... great video, thanks.
Tesla Wall Connector... but I've just fitted a zappi so would want my to install on my friends house instead. Love the videos, both laugh and learn.
17:20, the charge door flap actually has a sensor and if it detects you are within range you just need to git it a tap and it will open.
Tesla Wall Connector; I love your honest realistic videos; you are fast becoming the foremost installers in England. I’m dealing with an independent energy consultant currently for a summer installation; otherwise I find it all rather confusing!
Tesla wall Connector! Thanks for all the great content keep it up been watching and learning whilst getting a few bits and pieces done at home!
I had a gen 2 installed in my Florida garage. It took all day to charge, like 8 plus hours. I now moved to a condo and use the local supercharger, less than 40 min. I have a model 3 perf. I'm also glad I got the longer cable when I had the home charger.
This Tesla wall connector looks good. And will clearly complete with the wide range of other connector chargers. It would be good to see you do a comparison between the 4-5 leading domestic wall connectors and also more info about the option of moving to a 3 phase electrical supply, particularly in London.
Tesla Wall Connector... Helpful videos, thanks
Tesla wall connector. I’ve just ordered mine and been watching your videos which have been really helpful, winning a Tesla charger would be fantastic seeing as they are currently out of stock!! Good luck everyone 👍
Tesla Wall Connector - What a time we live in to get excited about a charger! Thank you for the insight into the safety systems required for such chargers.
This is becoming my favourite UA-cam channel!
Tesla wall connector :) thank you for this video. Really appreciate it
Tesla wall connector sounds like a plan man. Fitted and supplied free sounds even better.
hi the cable size is 6mm and the circuit breaker is 32 A type c correct?
this is what id like to know also ????
Tesla wall connector. Wish I’d seen this before we installed our mk 2. Many thanks for the video.
TESLA WALL CONNECTOR !!! Thanks for the content
Thanks, wasn't sure if you had to loop the single phase to all phases like some ovens. So only to L1 - Active/Neutral & earth easy,
Never heard of the pen fault protection device.
“TESLA WALL CONNECTOR” I love watching your videos!
The new Tesla Wall Connector looks really smart. Thank you. for the video. and info.
'Tesla wall connector' - great review, thanks for going over the PEN Fault detection device - just what I needed to know...
Tesla wall connector. Hoping to get a Model 3 in September and have been following your channel for a while due to your unbiased reviews on home chargers.
HI, Love your videos and the electricians who fitted our heat pump yesterday said they watched you also. Love to have you fit your old Zappi you took off the wall as I collected my first electric car today.
Tesla Wall Connector, no rush as it looks like I won’t be getting my CT anytime soon.
Tesla wall connector!!!!!! Got to have one man keep up the good work on the channel!!!!
Tesla Wall Connector. Love your videos!
Nice 👌 thanks for your video update.
Tesla Wall Connector
Would be great to swap out the terrible unit that I currently have, the first unit lasted three days before packing up and it took the company a month to come back out to look at it and end up replacing it. It’s supposed to be smart but it’s that smart that it can’t work unless it’s connected to the internet.
The novelty of the button to open the flap rather that messing with your phone is rather appealing too.
HI Jordan - great video and many thanks for posting. I want to install the Tesla wall connector, but have a TN-C-S supply, Earth rods/Mat are not really an option, and from my research the PEN fault devices available for 1Ph supplies do not really comply with BS7671:2018 Amd 1. I'm guessing that the Zappi is the best option? Thanks
I would highly recommend the hypervolt as a great option, check out some of the videos I have made recently about it
can you wire straight from the consumer unit to power the PEN device or do you need to take a main feed from the incoming tails?
Great video, I just got mine and was a little concerned about the two screws in the top and rain, seems like the nook would gather a small pool of water... but maybe I'm just needlessly worrying? Any how thanks again for a great video 😊💪
Hi. Thanks for amazing video. Could you please tell, what size of the cable should be using for installation in 1 phase?
Tesla wall connector , love your videos really informative
Tesla wall connector, loving the uploads, the channels and content. Keep it up!
Tesla wall connector! Thanks for a great video for new Model y owner doing my research
Awesome congrats!
Hello
Please can you tell me whi h RCD unit you have advised. I couldn't make it out on the video.
Thanks
Very insightful, thanks. I plan to get one when I move. Currently charging off a 3pin through the letterbox. It works fine, just a bit awkward to take out and put away.
Great video, thanks!
It's a lovely product but then we have to install additional protection indoors, how exasperating. So the cost is at the same level as other equivalent products from other providers. People will ultimately be considering choices based upon cost.
What amperage circuit breaker do you put in the Consumer unit? Can this circuit be shared with the rest of the garage or does it need to be dedicated to the wall charger? Thanks.
Good review and nice to see the nod to John Ward from you and Tesla! :)
"TESLA WALL CONNECTOR", Thanks for the review as well as the information on the installation. Very informative!
Tesla Wall Connector - I want one! Excellent upbeat description - thanks.
Thanks for watching!
Tesla wall connected - Love your vids
Tesla Wall Connector
Nice setup and review video. Everyone needs a Tesla in their life
Tesla Home Connector... good to learn more about this and compare to the only other EV home charger I have used - PodPoint.
Great 3rd Generation Tesla Wall Connector video. Hope to see it installed at my place. Setting notifications on and a reminder to check the channel on June 9.
Tesla wall connecter .... Nice and informative videos on the wall charger, I could really do with this as I take delivery as a SR+ in a couple of weeks, plus you'd be helping me out doing up my place I just got with my girlfriend. Thanks for the great videos!
Is a CT clamp not required with this as didn't see one installed so wondering how main fuse is protected?
Thanks
Tesla Wall Connector - From Cottenham (love you channel)
Tesla Wall Connector - about time this came to the UK