The main reason we moved to other storage was capacity, and that's slowly becoming a non-issue. Solid State memory has a lot of benefits that I look forward to seeing taken advantage of once it becomes sufficiently commonplace. It's a shame that we'll probably never see the return of the cartridge proper since the rent-seekers are slowly boiling us in the water of digital-only software downloads.
@@JosephDavies mechanical hdd is still pretty much fast for PS2/OG Xbox/Xbox 360/Xbox One/PS3/PS4. Even budget gaming PC with hdd is fine for playing 6th/7th gen consoles and indie
He’s right about the SSD Life. In this application it’s going to be doing 99% reads. SSDs take wear when writing not reading. So I would not be surprised if it lasted 20-30+ years easy.
just want to note, ssd's do actually get worn during reads, just not to the same extent as writes. The physical process of reading data from cells actually increases the leakage of nearby cells, so if data is read from the same area frequently enough, the controller has to extract the data from those other cells and rewrite them before they become unreadable. I know it's a little nit picky, but I've heard people say that often enough that I get worried someone is going to abuse the crap out of their SSD thinking it's has no effect, only to discover the horrible truth when it's too late.
@@jacob_90s Even with this, I still feel like the SSD may outlast the lifespan of the console itself. The GPU/CPU will die long before the SSD does, I'd say.
This channel gave me inspiration to get back to modding xbox 360. Finally desired replace my ancient nand flasher that used printer port I think (early one) . Also learnt that not all phat 360 were prone to RROD from this channel and I plan replace my 360 RGH falcon that is slowly showing gpu failure with Jasper Kronos that failure rate is below 1%.
Just so you know isotropic alcohol works really good for cleaning off chips. Leaves no residue and it's probably cheaper than the Arctic cleaner solution you're using.
Those Rev C clones are getting pretty hard to come by these days. I've been using Matrix Glitchers but they kind of suck for Jasper BBs since they don't have have the cap bridge point which usually solves longer boot times :/
I don't even check the clock point by hana chip anymore. I have single handedly destroyed almost 8 working xboxes because of that one point. Since switching to an alt point every RGH I attempted has been successful. I appreciate the fact that modding is not a specific process, but a general set of instructions that must be completely changed from console to console. No 2 xboxes are the same.
Y'know, I have a May 2008 Falcon awaiting a RGH. Unfortunately 3.0 is the only thing I'm able to get in there (1.2s are extinct locally) but that won't stop me from going ahead and giving it a shot. Thanks for all those videos you've been putting out. Here's hope I can upgrade its aging 20GB HDD once I get the RGH secured in there. Already repasted and one of the controllers is a white front/black backside combo I put together.
in order to repaste the chip that do not have IHS, you better spread the thermal paste over the entire DIE, since the heat from the cpu/gpu is generated throughout the DIE, and this heat needs to be dissipated in the heatsink, if for some reason a tip of the DIE is missing thermal paste you risk losing the chip, now if the chip has an IHS this does not happen because the DIE is already transferring the heat to the IHS, I saw a video where the technician received a video card to repair that the video card stopped displaying an image as soon as it opened a game, when he disassembled the video card a part of the gpu's DIE was without thermal paste, he added more thermal paste and the graphics card returned to normal operation
Holy crap I am such a nerd. I have watched several videos this length about repairing xboxes for fun, and now am going to make a 8 (maybe 4 or 16) bit CPU in minecraft. I am so weird. I love it.
Another reason this such a great console. I can't believe how slow the normal boot up has gotten as this system is blazing fast with that new program system.
It can definitely slow down once you throw a ton at it! If you see Adam's video, it takes well over a minute to access the games now due to all the hard drives he has hooked up to it.
I wish there was a local console modder in Arkansas so that I can get my personally desired mods done. Because the only modding services I see on eBay is the DCHDMI (now with the kit in stock) and the WiiDUAL (kit still not in stock). I already purchased a GBA with the IPS mod and it has the spongebob themed casing because well, I used GBA Movie Converter 1.50 to turn my specifically Dolby to SRS downmixed/downscaled movie of my Spongebob movie off of my DVD and I'm satisfied with the result, and the IPS GBA should looks even better.
I'm still waiting for my 30 awg wire to arrive from amazon so I can finally finish modding my PSone, PS2 modbo chip, fix an rgh system and finally run wiring for some arcade machine buttons. I don't know if I have time to work on this, make a crap ton of mistakes, then have to fix those mistakes. Oh well.
I rescued a xbox 360 arcade that some body threw out in the dumpster. All I had to was replace the drive belt on the dvd drive eject tray. Now it works like a brand new xbox 360. I think that's the reason it got thrown out because the last got frustrated with the disc eject not working correctly.
If you go and watch weekend modders RGH 1.2 walkthrough stream on his channel, he’s got a really good wire route. Way better than the one you’re using in this video. I’ve had no issues with freezing or anything whatsoever using it.
I have one also, lad. I will get a 2TB Western Digital Solid State Drive also so you can do the same for me. Having all original Xbox and Xbox 360 games on this is a great idea. However, I start with all the original Xbox games as that option.
I have installed an SSHD on a 2006 Celeron 900 laptop and installed a 128GB SSD on my current Tecra A11 laptop. So I've had experience with operating systems and installing nice little programs for the consumer user like Audacity. I guess I'm becoming a genius now, of course I am Retro Guru who studied tech for 3 years now. But I don't know about flashing things and I've certainly never built a computer in a chassis either, I just know how things go, but I can at least do half of what I know though. I have installed 2 SATA drives in laptops before and had experience with several operating systems including my favorite Windows 7, but consoles just plain scare me ok Mr. Mario. I have my uncle to help me with installing an SSHD to my original Xbox.
@@MrMario2011 Ehehehe. You may have a point. I'm just a coward who can't solder or control/flash firmware. That I most certainly can't do so some of my vast learning is useless.
I'm assuming that any games i have from games with gold and have purchased digitally will not work on a modded machine since they are tied to my Gamertag?
Looks like you had one of my old systems from back in the day I had a bunch of systems where I would change out the disk drive to a different system so basically the disk drive is not the same as the motherboard no matter what you do it's not going to work
Being introduced to your channel by Adsm's video, not sure how it went under my radar all this long :) I have a question I hope you can help me with: how can one burn an xbla game to a disc to play it on a 360 that plays backup? I remember doing it for one title years ago but am lost now, most of the tutorials I found recently are for rgh which doesn't describe how to do the conversion of xbla to iso. Thanks in advance
You no longer have to worry about swapping the internal drive unless it fails. Because you can get a USB 2.0 or 3.0 enclosure and put a hard drive in it up to 2tb and install games on it. One of the last updates to the firmware open that option up.
Great video, even in 2021 :-) . So if i make a hardmod on my phat xbox360 , i can install a 2tb harddrive in that case and copy all my games on that drive? Sounds sweet.
Hey , Just picked up a 360 jasper , really mint condition and looking where to buy the RGH 1.2 MOD CHIP. Modding my PS3 was a breeze compared to this process. Keep seeing ACE V2,V3.V4,V5 chips and not sure what I should be buying.
Hey great job. I always watch your channel. It helps a lot. I have a problem with mine and when it boots with the green dot it stays there and I don't see the green lines it just stays on the green dot and nothing shows on the TV. I need help please. What should I do.?!
I have some questions, as a newbie on hard-modded Xbox 360s. I have a JTAG/RGH'd white slim, and it 1) doesn't load up any og Xbox games; 2) I can't manage to make Aurora/Freestyle load on boot (I have to start freestyle from the xexmenu). What can I do to troubleshoot/fix these issues?
This is pretty awesome! This comment is a few years old since the video has come out... can anyone confirm if an SSD larger than 2TB is compatible with an RGH 1.2 setup? I would like to get a 4TB SSD in one if possible.
Hello! I'm curious about the temperatures. I have a Falcon Xbox 360, and the CPU temperature is usually between 55-60, and the GPU and memory always reach 75-80, do you think it's okay or is there a problem?
HI, i was watching you. I have some Q's. 1 I have a Falcon no hdmi, dash .17551, 203W, can i modd at least the dvd drive or i have to put it away? and i have an ssd drive no WD, can i replace it for the original one? Thank you a lot!!
Man .. you r awesome this is the best video about Xbox 360 ever .. thnks for your advise . by the way i have one phat 2008 i will do some sh**t with it .
**=** Hello, I haves a Xbox 360 with 3.3gb of hard drive, I think this hard drive are welded into the motherboard, and this is possible to recovery removed account from the hard drive? And how?
I'm thinking if you want to get into the 360 in 2020 stick with the slim. Yes there are fat jaspers which are great but I make it a rule to steer clear of the fats I'd feel awful if one failed after a few months.
Please can I use NAND-X OR Progskeet ?? as a Flasher to flash a Pc motherboard BIOS, for flashing BIOS we need VCC VSS SCL & SDA , what the equivalent soldering points of SCL+SDA on Progskeet Or Nand-x ,, HELP Please :)
Nice video, i have an old jasper motherboard but my dvd died, i never got the dvd key from it so its just a brick. I dont know if its fixeable because to replace new dvd you need old ones key.
@@MrMario2011 I'm abit of a noob my friend is that a fat gen Xbox or a slim XD I'm looking to get in to it wanna relive my childhood with abit of spice c: any information would be much appreciated
@@SirQuacksalotthe1st This is kinda late, but for anyone reading this in present day the Jasper is the last revision of the Phat console. It has been proven to be the most reliable and even more reliable than the slims. There are a lot more dead slims at this point than dead Jaspers.
SSDs are basically us going back to cartridge days of gaming, only on crack.
Man, I wish there was a retweet button on YT.....
The main reason we moved to other storage was capacity, and that's slowly becoming a non-issue. Solid State memory has a lot of benefits that I look forward to seeing taken advantage of once it becomes sufficiently commonplace. It's a shame that we'll probably never see the return of the cartridge proper since the rent-seekers are slowly boiling us in the water of digital-only software downloads.
@@JosephDavies mechanical hdd is still pretty much fast for PS2/OG Xbox/Xbox 360/Xbox One/PS3/PS4. Even budget gaming PC with hdd is fine for playing 6th/7th gen consoles and indie
KORALIK?!? I HEARD HE MADE A MISTAKE IN A VIDEO ONCE SIX YEARS AGO! HE'S THE WORST! LET'S DESTROY HIM!
Thanks bruh for being an "Xboss."
Hey Adam, long time fan from the keep dreaming series a long time ago. Keep up the good work.
I reject this name!
@@MrMario2011 FINE!
@@LeeZhiWei8219 Thanks!
@Fiklm ALL THE MISTAKES! HE'S THE WORST!
"I've been watching Adam Koralik for a while, I really enjoy his content"
Mood.
You understand that i want a 1TB SSD in my Xbox 360 too.
Fun Fact i found this channel when i needed to upgrade my JTAG 360, never left :)
Happy you stayed :D
IT TOOK HIM TWO YEARS TO TURN IT ON?!? WHAT A JERK!!!!
Sorry guys, I was...super busy. I spent less than a few months at home in 2018/2019.
Ha ha ha...not high on your TO DO LIST obviously! LOL
Geese, you're usually not the type to vent.
He’s right about the SSD Life. In this application it’s going to be doing 99% reads. SSDs take wear when writing not reading. So I would not be surprised if it lasted 20-30+ years easy.
just want to note, ssd's do actually get worn during reads, just not to the same extent as writes. The physical process of reading data from cells actually increases the leakage of nearby cells, so if data is read from the same area frequently enough, the controller has to extract the data from those other cells and rewrite them before they become unreadable.
I know it's a little nit picky, but I've heard people say that often enough that I get worried someone is going to abuse the crap out of their SSD thinking it's has no effect, only to discover the horrible truth when it's too late.
@@jacob_90s that’s why I water cooled my Xbox 360
@@jacob_90s Even with this, I still feel like the SSD may outlast the lifespan of the console itself. The GPU/CPU will die long before the SSD does, I'd say.
"It''s either gonna be hardware or software related"
Well that really narrowed it down XD
😂😂😂
It could've been firmware
This channel gave me inspiration to get back to modding xbox 360. Finally desired replace my ancient nand flasher that used printer port I think (early one) . Also learnt that not all phat 360 were prone to RROD from this channel and I plan replace my 360 RGH falcon that is slowly showing gpu failure with Jasper Kronos that failure rate is below 1%.
Just so you know isotropic alcohol works really good for cleaning off chips. Leaves no residue and it's probably cheaper than the Arctic cleaner solution you're using.
Those Rev C clones are getting pretty hard to come by these days. I've been using Matrix Glitchers but they kind of suck for Jasper BBs since they don't have have the cap bridge point which usually solves longer boot times :/
Could you reshare your updated ISO to include your updated apps or at least a link to where you got them? Thanks for the video!
Yes please... Love to have it.
Always enjoy a good xbox video. Amazing how far this went after I left the scene. I need to pick up and mod some xboxs again!
They're definitely fun to mod up!
I don't even check the clock point by hana chip anymore. I have single handedly destroyed almost 8 working xboxes because of that one point. Since switching to an alt point every RGH I attempted has been successful. I appreciate the fact that modding is not a specific process, but a general set of instructions that must be completely changed from console to console. No 2 xboxes are the same.
I don't even need to watch till the end. You bled , sacrifice has been made. Fix has been done, gods are satisfied
I BLED OVER THIS
Y'know, I have a May 2008 Falcon awaiting a RGH. Unfortunately 3.0 is the only thing I'm able to get in there (1.2s are extinct locally) but that won't stop me from going ahead and giving it a shot.
Thanks for all those videos you've been putting out. Here's hope I can upgrade its aging 20GB HDD once I get the RGH secured in there. Already repasted and one of the controllers is a white front/black backside combo I put together.
Have fun!
in order to repaste the chip that do not have IHS, you better spread the thermal paste over the entire DIE, since the heat from the cpu/gpu is generated throughout the DIE, and this heat needs to be dissipated in the heatsink, if for some reason a tip of the DIE is missing thermal paste you risk losing the chip, now if the chip has an IHS this does not happen because the DIE is already transferring the heat to the IHS, I saw a video where the technician received a video card to repair that the video card stopped displaying an image as soon as it opened a game, when he disassembled the video card a part of the gpu's DIE was without thermal paste, he added more thermal paste and the graphics card returned to normal operation
Well done Mario this was a great thing to do! 👍
based
@@MrMario2011 Thanks Mario 👍
Glad that I’m not the only person who has dropped their q tip in the isopropyl alcohol bottle 😂 great vid as always
Annoyingly enough this was the only time it happened, and of course it was while the camera was rolling!
So cool that you could ID the problem even years later!
You say cool, I say I have a problem 😂
Holy crap I am such a nerd. I have watched several videos this length about repairing xboxes for fun, and now am going to make a 8 (maybe 4 or 16) bit CPU in minecraft. I am so weird. I love it.
This video is making me want to redo the wiring in my two RGHs. :)
Do it!
Hey, nice video! Glad I could help - thx for letting me know about those dead links, I've just fixed em ;)
Helping the community out, appreciate it!
:)
Hey Josh you're here too?
Yeah, I've been watching Mario for years.
Octal always out here to help haha - fr Legend ;)
Another reason this such a great console. I can't believe how slow the normal boot up has gotten as this system is blazing fast with that new program system.
It can definitely slow down once you throw a ton at it! If you see Adam's video, it takes well over a minute to access the games now due to all the hard drives he has hooked up to it.
I wish there was a local console modder in Arkansas so that I can get my personally desired mods done. Because the only modding services I see on eBay is the DCHDMI (now with the kit in stock) and the WiiDUAL (kit still not in stock). I already purchased a GBA with the IPS mod and it has the spongebob themed casing because well, I used GBA Movie Converter 1.50 to turn my specifically Dolby to SRS downmixed/downscaled movie of my Spongebob movie off of my DVD and I'm satisfied with the result, and the IPS GBA should looks even better.
I'm still waiting for my 30 awg wire to arrive from amazon so I can finally finish modding my PSone, PS2 modbo chip, fix an rgh system and finally run wiring for some arcade machine buttons. I don't know if I have time to work on this, make a crap ton of mistakes, then have to fix those mistakes. Oh well.
I still use Arctic Silver 5 in 2020. Tried and true and stays really well conductive for a LONG time. Great stuff, I don't care what anyone says.i
Yep! Nothing wrong with AS5. Is there better stuff? Yeah. Is AS5 still good? Yeah.
Thermal paste gatekeepers are weird.
Nice work, I've been thinking about getting my 360 restored like that.
You should!
Nice work!!
I thought you were gonna forget the avatar data lol
I nearly did!!
Mr Mario and Adam Koralik are like internet mentors in my eyes.
I rescued a xbox 360 arcade that some body threw out in the dumpster. All I had to
was replace the drive belt on the dvd drive eject tray. Now it works like a brand new
xbox 360. I think that's the reason it got thrown out because the last got frustrated
with the disc eject not working correctly.
Nice save!
@@MrMario2011 Thank sman.
I just did that to a $12 Jasper from Goodwill. I used a known-good drive belt from an old LG drive from a desktop PC and it worked.
If you go and watch weekend modders RGH 1.2 walkthrough stream on his channel, he’s got a really good wire route. Way better than the one you’re using in this video. I’ve had no issues with freezing or anything whatsoever using it.
Used that exact video yesterday, insta boots all day long
What soldering iron and temps do you use when you are soldering? Do you use different temps for different consoles?
Thanks brother!!!💪
So do you offer a service to RGH consoles? About to pick up a 360 and CoolRunner... and not sure if I wanna risk doing it myself.
Nope, but I've got friends over at The Mod Shop or Gardendale Garage that do!
Thank you for showing the repasting process!
Happy it helped someone!
you love doing this, because youre a super villain.
I have one also, lad. I will get a 2TB Western Digital Solid State Drive also so you can do the same for me. Having all original Xbox and Xbox 360 games on this is a great idea. However, I start with all the original Xbox games as that option.
The thermal paste on the caps/resisters that are on the substrates shouldn't be a huge issue.
I have installed an SSHD on a 2006 Celeron 900 laptop and installed a 128GB SSD on my current Tecra A11 laptop. So I've had experience with operating systems and installing nice little programs for the consumer user like Audacity. I guess I'm becoming a genius now, of course I am Retro Guru who studied tech for 3 years now. But I don't know about flashing things and I've certainly never built a computer in a chassis either, I just know how things go, but I can at least do half of what I know though. I have installed 2 SATA drives in laptops before and had experience with several operating systems including my favorite Windows 7, but consoles just plain scare me ok Mr. Mario. I have my uncle to help me with installing an SSHD to my original Xbox.
Already explained it all in that segment.
Bruh, who claims to be becoming a genius and name drops themselves? 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
@@MrMario2011 Ehehehe. You may have a point. I'm just a coward who can't solder or control/flash firmware. That I most certainly can't do so some of my vast learning is useless.
Adam's a cool dude.
u a cool dude
🤩 That Background-Pic is too good ✨
😂
1:22:11 Wow! A whole 20GB! Someone might buy it for 50 cents! Score!
Can't even fit this exported video file onto that drive .😂
"It''s either gonna be hardware or software related"
In other news, dogs can bark
An insult to all mute dogs out there, from a cat pfp user no less!!!!
@@MrMario2011 lol
Not gonna lie, I miss my old Xbox 360, had it for 7 years
They're still great! Been using mine regularly again, February 2021.
Is there any chance of sharing the updated iso please? Ive rghd my jasper and all ok with updated dash but now need to setup
I'm assuming that any games i have from games with gold and have purchased digitally will not work on a modded machine since they are tied to my Gamertag?
You'd have to unlock them.
@@MrMario2011 how do you unlock them?
Looks like you had one of my old systems from back in the day I had a bunch of systems where I would change out the disk drive to a different system so basically the disk drive is not the same as the motherboard no matter what you do it's not going to work
Wow, I've never seen the inside of a 360 before or the HDD for that matter😲
Now you have!
Good video. Awesome stuff dude.
I can even soldering and watch the entire thing, rgh Xbox on Christmas that's for sure
Would be a good Christmas present!
Only XGD3 games will say “play game” with a bad dvdkey. All XDG2 games, which includes every copy of king Kong, will show “play dvd” instead.
Being introduced to your channel by Adsm's video, not sure how it went under my radar all this long :) I have a question I hope you can help me with: how can one burn an xbla game to a disc to play it on a 360 that plays backup? I remember doing it for one title years ago but am lost now, most of the tutorials I found recently are for rgh which doesn't describe how to do the conversion of xbla to iso.
Thanks in advance
Wow amazing video please make more xbox videos!
Already plenty on here 😂
Thanks for the video, good information
You no longer have to worry about swapping the internal drive unless it fails. Because you can get a USB 2.0 or 3.0 enclosure and put a hard drive in it up to 2tb and install games on it. One of the last updates to the firmware open that option up.
Point FT2R2: you're my bestest friend
What about TRIM - is that supported since you put in a ssd into an OS that probably can not handle trim?
Correct, these consoles don't support TRIM. SSD still works, though.
Ever consider doing a RGH tutorial for Corona consoles?
Eventually lol
Great video, even in 2021 :-) . So if i make a hardmod on my phat xbox360 , i can install a 2tb harddrive in that case and copy all my games on that drive? Sounds sweet.
Indeed!
Appreciate these videos - getting back into the Xbox hacking scene. No more LPT cables and diodes like the JTAG days
xFlasher is right around the corner as well!
@@MrMario2011 Can’t wait. I’ve got a jasper small nand and a halo 3 360 console waiting to become an amazing machine. Keep up the great content :)
Hey , Just picked up a 360 jasper , really mint condition and looking where to buy the RGH 1.2 MOD CHIP.
Modding my PS3 was a breeze compared to this process. Keep seeing ACE V2,V3.V4,V5 chips and not sure what I should be buying.
So basically this a xenon motherboard with a xbox jasper 360 arcade cabinet?
Why does the original 360 have a more beefy cooling setup
It ran hotter.
@@MrMario2011 aren't they all the same? With the same performance
Hey great job. I always watch your channel. It helps a lot. I have a problem with mine and when it boots with the green dot it stays there and I don't see the green lines it just stays on the green dot and nothing shows on the TV. I need help please. What should I do.?!
I have some questions, as a newbie on hard-modded Xbox 360s. I have a JTAG/RGH'd white slim, and it 1) doesn't load up any og Xbox games; 2) I can't manage to make Aurora/Freestyle load on boot (I have to start freestyle from the xexmenu). What can I do to troubleshoot/fix these issues?
I knew it was the dvd key right at the start. Why? because I've done this, too. hahah.
Gotta love it!
So only thing I need to buy is a T6 as I own a T10 due to the original xbox and how much does a 1TB SDD go for
Them pictures LMAO
🥛
Hi! Thank you for this video. Is the SSD installation process reversible?
Always
OMG I want one of those boxes!
This is pretty awesome! This comment is a few years old since the video has come out... can anyone confirm if an SSD larger than 2TB is compatible with an RGH 1.2 setup? I would like to get a 4TB SSD in one if possible.
With the XL HDD patches, yes.
So, will i see a day that we have a Jailbroken XBOX One X and i finally can feel happy ?
Hello! I'm curious about the temperatures.
I have a Falcon Xbox 360, and the CPU temperature is usually between 55-60, and the GPU and memory always reach 75-80, do you think it's okay or is there a problem?
that's one handy tool for opening up :)
Still the best!
sorry, can you put a video explaining the procedure for making the xbox 360 rgh read ssd? thank you.
All shown here, not much else to it.
@@MrMario2011 my xbox does not read them, there are ssd of compatible brands
with what agent did you wash off the factory paste? like rubber is very difficult to wash off!
I prefer Arctic Clean.
@@MrMario2011 thank you
HI, i was watching you. I have some Q's.
1 I have a Falcon no hdmi, dash .17551, 203W, can i modd at least the dvd drive or i have to put it away? and i have an ssd drive no WD, can i replace it for the original one?
Thank you a lot!!
Man .. you r awesome this is the best video about Xbox 360 ever .. thnks for your advise .
by the way i have one phat 2008 i will do some sh**t with it .
Idea: Make a shop and for every xbox make a video how you rgh it and other stuff!
Hell no.
@@MrMario2011 😂
What is the difference between big block jasper is that the kronos aka jasper v2 or just heatsink
**=** Hello, I haves a Xbox 360 with 3.3gb of hard drive, I think this hard drive are welded into the motherboard, and this is possible to recovery removed account from the hard drive? And how?
That's not a hard drive, and no recovery that I know of.
hello do you have a megalink for your xexmenu 1.1 with apps please . keep up all the good work you are doing for us modders
Yep, in my app pack video
thank you
Is single strand or multi strand wire better for getting these small points?
Single.
what size is that arctic mx-4 thermal paste?
I believe 45g
@@MrMario2011 i helped someone jailbreak a fat ps3 on 4.84 using miniweb exploit and it worked perfectly too
ten hundred % in software
i must follow
u r A big heLp👏
great videos
Thanks!
@@MrMario2011 still going to be confident of soldering on my Xbox 360 lol
For the alternative clk reset point, could I use one of the cables from the slim pack to reach the point?
As long as it's long enough, sure.
Does anyone know what program can be used in the xbox360 to view divx movies in a DVD?
I've seen it happen but don't know what program was used
I'm thinking if you want to get into the 360 in 2020 stick with the slim. Yes there are fat jaspers which are great but I make it a rule to steer clear of the fats I'd feel awful if one failed after a few months.
I have a modded Xbox i tried to play online and my screen went all blue ?? Can i fix it please reply 😢😢
Great video - do you have a download link to your RGH installation disc (iso file) ?
In my starter app pack video.
Is that the same starter app pack or have you updated the link on that old video with new files? Mario...
Please can I use NAND-X OR Progskeet ?? as a Flasher to flash a Pc motherboard BIOS, for flashing BIOS we need VCC VSS SCL & SDA , what the equivalent soldering points of SCL+SDA on Progskeet Or Nand-x ,, HELP Please :)
Very cool build, but won't the 360 thrash an SSD due to lack of TRIM support?
From what I've been told that was a bigger issue on older SSDs.
Can u put that in laymen terms!!
I'm not a thermal paste fanboy, but I prefer noctua nt-h1 for all of my stuff
Gotcha, why's that?
@@MrMario2011 whenever I use it it seems to spread better than the others I've tried
That's what I've been using too. It works great.
Nice video, i have an old jasper motherboard but my dvd died, i never got the dvd key from it so its just a brick. I dont know if its fixeable because to replace new dvd you need old ones key.
You can get it through RGH
i installed the SSD but its not showing on the xbox
Taking notes 📝
My DVD drive just stays open tray doesn't matter what game I use so I'm kinda stump no errors or anything just goes from reading to open tray
Most likely dead laser.
@@MrMario2011 probably right like it says reading for a second then says open tray I ain't good with soldering though so I guess I'll ftp for now
Wanted to ask a question how reliable are old rgh fat 360s the white ones or would you recommend a slim 360 modded ?
My preference is for the Jasper motherboard.
@@MrMario2011 I'm abit of a noob my friend is that a fat gen Xbox or a slim XD I'm looking to get in to it wanna relive my childhood with abit of spice c: any information would be much appreciated
@@SirQuacksalotthe1st This is kinda late, but for anyone reading this in present day the Jasper is the last revision of the Phat console. It has been proven to be the most reliable and even more reliable than the slims. There are a lot more dead slims at this point than dead Jaspers.
Thank You