It's always a good feeling to have fresh, clean oil in the crankcase and to know that the job was done right. Even the simplest job can be ruined by over-filling or over-tightening. DIY is best.
😊 hello - tell me how you measure the oil level ? There are apparently two schools of measurement - without screwing in, and with screwing in the bayonet motorcycle on a side stand or vertically and the bayonet itself - it is constructed in such a way that nothing can be seen on it when the dipstick is screwed in, it should indicate max on the scale - and when inserted, only how much? Each manual is a different procedure... what does this line on the bayonet scale mean? Thank you for your answer
Thank you for your comment. I have checked the workshop manual that I have. The manual includes the following information: “Keep the vehicle upright with both wheels on the ground.” “Refit the cap with dipstick into its hole without tightening.” “The oil level is correct when it close to the "MAX" mark.” I made the mistake of screwing in. Oops. Thank you for pointing that out.
Thanks for your reply, I am thinking about buying one as well. How does it ride on the highway? Yours is really nice for cruising and enjoy the scenary
Hi, Antoine! I swapped out the stock exhaust right after purchase, so I can't compare it to the original. But the exhaust has a really nice deep bass sound. It accelerates smoothly and feels great, especially around 115 km/h.
It's always a good feeling to have fresh, clean oil in the crankcase and to know that the job was done right. Even the simplest job can be ruined by over-filling or over-tightening. DIY is best.
I agree.
DIY maintenance increases my attachment to my Guzzi.
今度友人のv9ボバーのオイル交換をお願いされてます。非常に参考になりました！ありがとうございます😊
コメントありがとうございます♪
縦置Vツインはメンテナンスがしやすいので、他のメンテ動画も近々上げられればと思います。
Great videos of yours, thanks for your help! Helped me a lot for servicing my own Moto Guzzi V9 Bobber :)
Thanks for finding the videos helpful! Glad they could assist with servicing your Moto Guzzi V9 Bobber!
初めまして，目下V7Ⅲ乗りの者です🙇♂️比較的マイナーで特殊な構造の輸入バイクを
こんなに慣れた手つきでオイル交換や整備できるなんて凄いです😳！バイク業界の方
なのでしょうか？ V9が（再び）気になっていることもあり登録してしまいましたw
またマフラーもオリジナルより音が大きいようですが，交換してあるのでしょうか？
コメント＆ご登録ありがとうございます！
アナログ感のあるバイクがやっぱり好みで、行き着いたのがGuzziでした。V7iiiもとてもいいマシンですよね！V9よりも人馬一体感があって、正直悩みました。
バイクや車とは全く畑違いの仕事をしているただの趣味人です💦お褒めのお言葉ありがとうございます♪
マフラーはMIVVのGHIBLIというスリップオンをつけています。うるさすぎず好みの音です。
マイナーだけどいいバイク乗りの仲間として動画楽しみにしていてください。ご質問なども大歓迎です！
Merci pour cette vidéo👍. Par contre il me semble que motoguzzi préconise de l huile 10w60.
Merci pour votre commentaire.
You’re absolutely right, although 10w-60 oil is not common in Japan.
はじめまして楽しく拝見させて頂きました。
V7 Racerに乗って居ります。
オイル交換 毎回1000kmで行ってるんですか？
コメントいただきありがとうございます。
エンジンオイルは整備マニュアルによると10,000km毎とありますが、私は気分的に半年or3,000kmを目安に換えてます。
V7Racer一度試乗しましたが、身体との一体感があってとても楽しかった記憶があります。V9とは全然性格が違くて増車したくなります。大事に乗られてください！
こんにちは！私も Motoguzzi V9 Roamer に乗っているライダーです。台湾の台中市龍井に住んでいます。V9 Roamer のエンジン オイルをメンテナンスして交換した後、メッセージ バーのメンテナンス信号を消すにはどうすればよいですか?ストップウォッチで？
謝謝您的評論。 我也不知道如何重置maintenance icons。 你好像需要帶去經銷商那裡。 我不在乎那個指標。
以下參考
wildguzzi.com/forum/index.php?topic=102614.0
😊 hello - tell me how you measure the oil level ?
There are apparently two schools of measurement - without screwing in, and with screwing in the bayonet
motorcycle on a side stand or vertically
and the bayonet itself - it is constructed in such a way that nothing can be seen on it
when the dipstick is screwed in, it should indicate max on the scale - and when inserted, only how much? Each manual is a different procedure... what does this line on the bayonet scale mean? Thank you for your answer
Thank you for your comment.
I have checked the workshop manual that I have. The manual includes the following information:
“Keep the vehicle upright with both wheels on the ground.”
“Refit the cap with dipstick into its hole without tightening.”
“The oil level is correct when it close to the "MAX" mark.”
I made the mistake of screwing in. Oops.
Thank you for pointing that out.
so we put it in - we don't screw it in?
I believe that is correct. Just put it in, don’t screw it in, and check the oil level.
you see... my instructions say about screwing
I'm already stupid because of all this😅
机油螺丝说明书上是20-22Nm
Noted with thanks! My service manual says it's 12Nm, but it feels a bit weak.
オイルフィラーキャップを外す工具が見つからなくて断念…。いったいどこで売ってるんです？
コメントありがとうございます。
私はebayで購入しました。”moto guzzi oil filler wrench”で検索すると出てきます。値段が高く感じましたが、ストレスはかなり減りました。以前はy型プーリーホルダーと太めの輪ゴムを使って無理矢理外していました。
@@wayproscyclewerks 見つけました！ありがとうござますー！！！
What brand is your exhaust?
Thanks for your comments! My exhaust silencers are “Mivv Ghibli slip-on silencer”. I hope this will be useful to you.
Thanks for your reply, I am thinking about buying one as well. How does it ride on the highway? Yours is really nice for cruising and enjoy the scenary
Hi, Antoine! I swapped out the stock exhaust right after purchase, so I can't compare it to the original. But the exhaust has a really nice deep bass sound. It accelerates smoothly and feels great, especially around 115 km/h.