WILL THIS DENT POP OUT ⁉️Watch and see! Dent-Remover 🇬🇧

Поділитися
Вставка
  • Опубліковано 10 гру 2018
  • WILL THIS DENT POP OUT⁉️
    Watch and see! Dent-Remover🇬🇧
    ▶️ Ford Mondeo 1/4 panel damage, repaired by Dent Remover ltd in Beverley East Yorkshire
    www.dent-remover.co.uk
    Thanks for watching my latest repair video.... The damage to this rear side panel was caused by a soft impact and the pressure of the impact caused the area to pop in. As the dent looks smooth (no sharp indentation) it’s easy to assume the damage will just pop out like a reverse effect.
    Dent Remover tries this approach and shows you how it went, and explains why it didn’t magically pop out!
    As the paintwork wasn't damaged in this case Dent - Remover was able to repair the damage without the need to repaint the panels which would have resulted in at least two panels and a bumper corner with non factory paintwork applied.
    The Paintless Dent Repair method was used to repair this damage efficiently and conveniently, specialist tools where used to manipulate the dent from the painted surface as seen in the video, then carefully tapping the area to blend the damage back to its former shape.
    Once the dent was removed the area was polished up and our customer was extremely happy with the repair.
    🎼Video soundtrack courtesy of
    DJ Quads-Downtown funk (free music for vlogs)
    Soundcloud
    DJ Quads- All the colours (free music for vlogs)
    Soundcloud
    ..............
    This repair too small for you? Check out Dent-Removers bigger and deeper repairs!
    You can also check out this video of our recent repair, Audi S3 rear 1/4 damage caused by another car door opening onto the panel
    • Audi S3 rear arch dent
    This video repair is great make sure you check this out too! BMW 135i rear arch Glue Pull Repair!
    • Glue Pull Repair in Po...
    ……………………………………………………………………………….
    Dent-Remover LTD
    Beverley
    East Yorkshire
    England
    Martin Sadler
    phone: 07784 543932
    Dent-Remover Website
    www.dent-remover.co.uk/
    ……………………………………………………………………………….
    🖥 UA-cam Channel
    / dentremover
    🖥 Yell.com Advert with 28 5* reviews!
    www.yell.com/biz/dent-remover...
    🖥 Google+ Page
    For upto date blogs and over 60, 5🌟🌟🌟🌟🌟 reviews
    plus.google.com/1058644852652...
    🖥 Facebook Pages
    For upto date repairs and where you can ask about damage to be repaired!
    ▶️ / dentremoverhull
    And...
    ▶️ / dent.remover.9
    🖥 Twitter
    denthull?lang=en-gb
    🖥 Instagram
    / dent_remover_hull
    🖥 Linkdin Company Page
    / martin-sadler-2a98a489
    🖥 Freeindex Page
    Over 85 5* reviews
    www.freeindex.co.uk/profile(de...
    ……………………………………………………………………………….
    🔷 Paintless Dent Repair - VW Passat 1/4 panel dent repair!
    🔷 Please Watch… Mazda MX-5 amazing glue pull repair!
    🖥 • MAZDA MX-5 - Dents Rep...
    #DentRemover UnDented #pdrvideos #Ford #Mondeo #HullDents #DentsHull #IMI #HullDent #cityofculture2017 #MartinSadler #pdruk #dentolympicsrunnerup2015 #dentsinhull #pdr #valueservice #mtelive #auto365 #mobiledentrepair #QualityAssured #dentremover #DentTrainer #ILoveDents #kingstondentspecialist #pdrnationcertifiedtech #tdnautomotive #certified #DentQuote #certifiedtech #dentremoval #pdrn #TDNGroup #paintlessdentremoval #tdngroup #paintlessdentrepair www.dent-remover.co.uk
  • Комедії

КОМЕНТАРІ • 45

  • @live4fishing939
    @live4fishing939 5 років тому +2

    I’m a car enthusiast that likes a clean tidy car, Martin came and removed some really nasty to moderate dents for me and I can’t fault him and his work, really high standards and professional.

    • @murdock2769
      @murdock2769 5 років тому +1

      Excellent video although the music is distracting

  • @DentZero123
    @DentZero123 4 роки тому +2

    Outstanding my friend... you're always knocking it out of the ballpark

  • @luizteixeiraazevedo5608
    @luizteixeiraazevedo5608 3 роки тому

    Very good, and good explanation.

  • @bradgreen6923
    @bradgreen6923 4 роки тому

    Another fantastic repair. Cheers mate.

  • @jamesyday72
    @jamesyday72 3 роки тому

    Great work

  • @franciscoramos226
    @franciscoramos226 5 років тому

    Nice job Martin! 🖒🖒

  • @andysdentrepairs5148
    @andysdentrepairs5148 5 років тому

    Nice repair dude 👌

  • @protell1433
    @protell1433 5 років тому

    Nice! Congratulations! Pierce of cake!

  • @kev008ify
    @kev008ify 5 років тому

    Sweet repair know do-da needed here 👍

  • @danzilmack9325
    @danzilmack9325 4 роки тому +1

    Amazing what you can do with metal. Very rewarding

    • @dentremover01
      @dentremover01  4 роки тому

      Thanks Danzil! It’s very satisfying!

  • @pepehernandez1232
    @pepehernandez1232 3 роки тому

    Good job 👍👍👍🇺🇸🇺🇸🇺🇸

  • @Abcd-hr9ot
    @Abcd-hr9ot 4 роки тому

    Excellent

  • @billramsey800
    @billramsey800 5 років тому +1

    Hi Martin nice demo of glue pulling would also like to see some sharp tip tools being used and explained if possible cheers Bill.

  • @aaronaguayo6341
    @aaronaguayo6341 4 роки тому

    Amazing

  • @rsehgal63
    @rsehgal63 4 роки тому

    well done Martin. .no doubt sooner you will have lots n lots of subscribers. .Dont forget me ☺..Great job

    • @rsehgal63
      @rsehgal63 4 роки тому

      @@dentremover01 I met a guy in here (PDR tech) he also watches your all the videos..Since we met you are doing great lol ..God Bless you Martin..you are helping lots of people like me by your videos 🙏🙏

  • @igordentremover4651
    @igordentremover4651 5 років тому

    good job. with dignity

  • @johno-gb7ci
    @johno-gb7ci 4 роки тому +1

    And when someone buys this car. they will never know great job!

    • @dentremover01
      @dentremover01  4 роки тому

      Thank you Johno I hope that’s the case!
      Take care Martin

  • @michaelarens2046
    @michaelarens2046 5 років тому

    No hill for a climber! Well done Martin! How's the shop working out for you? Looking to open one myself! 😎

  • @vadvalee
    @vadvalee 2 роки тому +1

    Красавчик 💪👍🔥

  • @stedlocks
    @stedlocks 4 роки тому

    Some of the Americans should watch the UK Boys doing their thing......!
    Good job!

    • @stedlocks
      @stedlocks 4 роки тому

      @@dentremover01 I'm thinking of one particular "PDR" person.....!😂

  • @billelrebai5414
    @billelrebai5414 3 роки тому +1

    Hello is that any chance toi know how to formulate this glow i will ne so thankful for tour Fred back

    • @dentremover01
      @dentremover01  3 роки тому

      Hi Billel thanks for your comment, I don’t know what you mean though sorry

  • @rk69Camaro
    @rk69Camaro 5 років тому

    How do you rate the K bar? My next purchase

  • @andrewboggis3174
    @andrewboggis3174 4 роки тому

    Nice repair as usual, trying my hand at ‘push to paint’ as I work in a body shop but the glues we have are rubbish..! What sticks and remover do you recommend?

    • @andrewboggis3174
      @andrewboggis3174 4 роки тому

      Dent - Remover Ltd thank you for taking the time to share your knowledge and materials used, it will really help. I rather just lift the dents as easier for I and the painters more so if it’s and insurance job as they want it done for peanuts..

    • @andrewboggis3174
      @andrewboggis3174 4 роки тому

      Another question, which light sett up/ line board do you use as this time of year are workshop is rather dark late in the day!

  • @user-ok9lt2oo9i
    @user-ok9lt2oo9i 4 роки тому

    It was easy!

  • @imranKhan-sb8kt
    @imranKhan-sb8kt 4 роки тому +1

    Hi sir, I am imran from India.
    Your work is so good.
    Where are you from ?

    • @dentremover01
      @dentremover01  4 роки тому +1

      Hi Imran thank you, we are in England (East Yorkshire) hope you and family are well

    • @imranKhan-sb8kt
      @imranKhan-sb8kt 4 роки тому

      @@dentremover01 thanks sir

  • @videostarish
    @videostarish 5 років тому

    Nice job Martin! Is there a solution if you 'go too far' & have an 'oil can'? cheers!

  • @user-ks8nt5uw8n
    @user-ks8nt5uw8n 4 роки тому

    Класс!

  • @marcinpalczewski3881
    @marcinpalczewski3881 3 роки тому +1

    How kong You repaired this dent?

    • @dentremover01
      @dentremover01  3 роки тому

      Hi Marcin I can’t really remember exactly, it would have taken a few hours possibly a morning/afternoon

    • @harwoods11
      @harwoods11 3 роки тому

      @@dentremover01
      What does that equate to in £££ for this type of repair?

  • @exclusivepaintlessdentrepa3944
    @exclusivepaintlessdentrepa3944 5 років тому

    👍👍👍