Excellent video! I’ve been trying to find out this information on the axles for these trucks so I could have the confidence to fix mine! Now that I see how easy it is to get the axle out I’ll never pay to get my u-joints or bearings done again.
I feel your pain... Started turning wrenches strait out of high school at 18 and just like you, pulling t cases and manual transmissions with the old shoulder jack or spending hours kneeling on concrete floors, never any pain. Now at 48 I'm walking at a 70 degree angle for the 1st 10 minutes of the morning, knees and shoulders always ache... but I still enjoy doing what I do and going to work, granted now its only 4 days a week and I'm usually working on toys while telling the young bucks to work harder on customers cars lol. Another Nice one buddy, Cheers!
Me too, that axle nut on pass. side was super tight coming off the first time on an 02 3500. No mega torque impact either but a 5' cheater pipe made it happen~ barely! That Milwaukee impact Pete's using made that look too easy on the driver side.
Love the full complement of content on this channel! C'mon folks hit that subscribe button. This guy deserves more recognition than he's getting. 🍻🍻🍻😎👍♥️🇨🇦
thank you very much!!! I really appreciate that and it would be awesome to get some more subscribers for sure!! thank you for the positive feedback!! cheers 🍻
You’re a much better mechanic than me but you gotta use the impact gun, that’s what they’re for. Save your back and strength, put a new bolt on later you round it off
Hey Pete, Dave Gibbons here,a.k.a. Newfie Loctite. Love the videos very entertaining. And your singing is really improving. Keep it up.more singing maybe a couple of Newfie jigs lol
I bought a seal installer off Amazon but it was the wring one lol so I just hammered the seals in with my regular bearing and seal installation tool that I bought from princess auto I think..🍻
Idk if I was that far into it. I think i would have changed both axle seals. Cause my luck a month or two later the other one would start leaking. JS..
How can I tell if it’s a bad Ujoint or bad wheel hub My 2500 ram is grinding and creaking badly sounds like a bad wheel bearing but watching this video idk now
Excellent video! I’ve been trying to find out this information on the axles for these trucks so I could have the confidence to fix mine! Now that I see how easy it is to get the axle out I’ll never pay to get my u-joints or bearings done again.
glad ya found it helpful! cheers 🍻
one of the best videos ive seen, im a subscriber now!
@@user-369- Nice One! thank you 🍻
Good video! Why not do both seals after that much labor both axles are removed?
I’ll say it again… you’re a great mechanic Pete! Awesome video ✌🏻 cheers 🍻
thank you very much!! I really do appreciate it!! cheers 🍻
It's a good thing there are people like Pete out there. There is no universe where I could do this haha
Well done, good sir!
haha well thank ya! 🍻
Greatest backyard mechanic
cheers 🍻
I feel your pain... Started turning wrenches strait out of high school at 18 and just like you, pulling t cases and manual transmissions with the old shoulder jack or spending hours kneeling on concrete floors, never any pain. Now at 48 I'm walking at a 70 degree angle for the 1st 10 minutes of the morning, knees and shoulders always ache... but I still enjoy doing what I do and going to work, granted now its only 4 days a week and I'm usually working on toys while telling the young bucks to work harder on customers cars lol.
Another Nice one buddy, Cheers!
thank you! yeah all the bull headed work from the years past are definitely catching up to me now! 🤣 cheers 🍻
PETE! ALWAYS ENTERTAINING!
Project doesn't matter. Always entertaining!
From Arizona.
thank you! cheers to ya Arizona! 🍻
Always excellent to see how stuff is done. Great episode Pete. Keep up the great work buddy 👍 RNDH 4 LIFE.
thanks buddy! cheers 🍻
Awesome job, we appreciate you sharing your knowledge!!
thank-you! 🍻
Pretty work as always Pete! I've done that job a few time's and yeah its not too bad but a bit time consuming! See ya next time!
thanks! yeah it's not too bad of a job as long as everything comes apart alright 🤣🍻
Me too, that axle nut on pass. side was super tight coming off the first time on an 02 3500. No mega torque impact either but a 5' cheater pipe made it happen~ barely! That Milwaukee impact Pete's using made that look too easy on the driver side.
Great vid !!
thanks! cheers 🍻
Another great video Pete you make it look easy can’t wait to see what’s next cheers 🍻
Thanks 👍🍻
Thanks for the video Pete. Keep em coming please, you have a great Chanel sir!
thank you very much! I really appreciate that 🍻
Nice one Pete!!! Always love the videos. Be it the ones that pay the bills or the ones that take the bills. Keep on keeping on man great channel
thank you! cheers 🍻
Why not do both seals while your that far ?.? GREAT VID , thanx for posting it , saved me lotta money !
I enjoy the vehicle repairs videos that pay the bills. I also learned a new saying from Pete.. "Nutter than Squirrel poop."
haha thanks! cheers 🍻
Finally popped my cherry and ordered the large RN+DH logo sticker! Will display it proudly on the back window of my Dodge 1/2 ton. Beauty!
that's awesome!! thank you very much, we really appreciate the support!!! cheers 🍻
Love the full complement of content on this channel! C'mon folks hit that subscribe button. This guy deserves more recognition than he's getting. 🍻🍻🍻😎👍♥️🇨🇦
thank you very much!!! I really appreciate that and it would be awesome to get some more subscribers for sure!! thank you for the positive feedback!! cheers 🍻
You make it look easy. 👍
cheers 🍻
Had a good laugh at your “The Count” reference……nice one!
haha yeah I couldn't help it! 🤣🍻
Hey Pete
My youngest is one of their junior mobile techs ambitious boy he is and enjoys working for them.
that's awesome! great group of fellas over there! 🍻
You’re a much better mechanic than me but you gotta use the impact gun, that’s what they’re for. Save your back and strength, put a new bolt on later you round it off
Hey Pete, Dave Gibbons here,a.k.a. Newfie Loctite. Love the videos very entertaining. And your singing is really improving. Keep it up.more singing maybe a couple of Newfie jigs lol
haha well thank ya!! oh I might be able to get a jig in there! 🤣🍻
Nice work Pete. Very good video Looking forward to seeing more.👍🫵🏻🍺
thank you! 🍻
Happy 4th of July Pete from Wisconsin
cheers! 🍻
Funny. Just turned 5pm here. Cheers
haha well like Alan Jackson & Jimmy Buffet say....Its 5 O'clock somewhere!! 🤣🍻
Pitter patter Pete's always gitten at er 🍺🍻🍺🍻
haha cheers 🍻
Oh , that cart sounds mean ! 😎👍🍺🇺🇸🇨🇦
haha it sounds wild!! 🤣🍻
Nice one!
thanks buddy! 🍻
Made that look EASY
thank you! 🍻
Man I've been waiting for that golf cart
She still sounds mean
it's gunna be a handful!! 🤣🍻
😮 thanks to you I can work on my stuff
that's awesome! I'm glad you find the videos helpful!! cheers 🍻
Another great video and job . No D Ron or Christine to help? 🍻☃️👍👍
thanks! 🍻
Where did you buy the bearing and seal installer. Is there and amazon link
I bought a seal installer off Amazon but it was the wring one lol so I just hammered the seals in with my regular bearing and seal installation tool that I bought from princess auto I think..🍻
Why not replace other side passenger side seal as well while it's all apart
You got that from cracking too many beers Pete
🤣 yeah maybe eh! 🍻
Idk if I was that far into it. I think i would have changed both axle seals. Cause my luck a month or two later the other one would start leaking. JS..
Nice One just wanted to say Happy 4th of July to everyone Have a great day and God Bless everyone
cheers 🍻
I would do the other seal while its apart as it will leak soon.
He'll no nb we use antisieze for lock tight.
How can I tell if it’s a bad Ujoint or bad wheel hub
My 2500 ram is grinding and creaking badly sounds like a bad wheel bearing but watching this video idk now
What size seal installer did you use? Just want to make sure I have one before starting lol
the one I used was about 3" 🍻
@@rednecksdirtyhands awesome thanks!
Freaking rams, that’s a lot of work for a seal
Why not do both seals while your that far ??
Good ole Dodge, Mr. Bezos caused you to use trusty hammer on new seal "eh"
haha yessir! 🤣🍻
We don’t need loctite in ontario
haha ya got that right!! 🤣🍻
Them bolts are tighter than a wet suit on a seal
🤣 Nice One! 🍻