Sapphire Nitro+ 5700 XT - Why you should Undervolt this Radeon card
Вставка
- Опубліковано 9 гру 2019
- locally.link/NSET - Check out the B550 Steel Legend on Amazon
amzn.to/3a7HTjL - Check out the Nitro+ 5700XT on Amazon
The Sapphire Nitro Plus RX 5700 XT is a great card.. Compared to similarly priced RTX cards it stands head and shoulders above in terms of performance and even compared to the more expensive 2070 Super refresh it comes very close to matching that card for 100 quid less..
And comparing 5700Xt’s against each other? Well the Nitro is one that stands out as being a great looking, high performing and very quiet option. One of the best AIB 5700XTs you can buy in fact.
….with that said…. It’s by no means perfect out of the box.. And thankfully for us there is plenty of room to make a great card even better..
So the question we have is simple… with some tweaking using the new adrenalin 2020 drivers, can we get primary bios performance but with silent bios power draw?
Can we do better?
Lets find out..
While your at it, check out some of the affiliate links below to some kit I've recently looked at.
locally.link/QSS4 - MSI B550i Gaming Edge WIFI ITX board
locally.link/OGTk - Drevo Blademaster Keyboard
locally.link/TngV - Gigabyte M27Q 1440p / 170Hz IPS gaming monitor
locally.link/4OH0 - ASRock B450 Steel Legend - ATX
locally.link/FwtE - ASRock B450 Steel Legend - Micro ATX
locally.link/NSET - ASRock B550 Steel Legend
locally.link/IVoN - ASRock B450 Gaming ITX Motherboard
locally.link/z5IK - Drevo Falcon RGB Gaming Mouse
Check out the Nitro+ 5700XT on Amazon - amzn.to/3a7HTjL
Check out the Challenger 5700XT on Amazon - amzn.to/3bideBT
Check out the RTX 2060 Ventus OC on Amazon - amzn.to/3eNbene
Check out the RTX 2060 SUPER Ventus on Amazon - amzn.to/3bz6QGq
Metis Evo on Amazon - amzn.to/3bgSiKo
Sub £20 CPU Tower Cooler - amzn.to/3bfxV0i
Music by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Disclaimer:
F7GOS assumes no liability for damage, misuse or misunderstanding of the information contained in this video. Use this information at your own risk. F7GOS cannot guarantee any particular result from the information contained in this video, and all information was presented as correct as of filming. F7GOS accepts no liability for information being proven incorrect after the creation of the video, and all information should be taken as opinion and guidance, not fact.
This video was not sponsored by anyone, and we do not accept monetary - or non-monetary - benefits to alter opinions or results. - Наука та технологія
the Scottish accent convinced me that I should do this
Yersh
I'm getting thes card mate fore shure
If Star Trek taught me anything, its to always trust a Scotsman with complicated engineering.
You just took me down from 100 C in my hotspot during benchmarking, to 85 C, while keeping the same score and FPS, you are a God, thanks!
Thank you so much for this! I managed to get my card to run stable on 1975@1040 with temperatures around 68 (junction around 80) in the lian li tu150. Amazing improvement from stock!
holy shit this really helped, i never thought to under-volt and i don't know why i didn't.. my junction has literally dropped by 20 thanks mate
I bought this card today and was so glad I found your video, it helped me undervolt so thank you very much and keep up the good work!
More than welcome bud 😊
I saw like a few videos with 15 mins long that just didn't explain much.
This one is simple and straight to the point.
mine is in the mail as we speak! cant wait to play around with it!!
I followed your idea, gave me the courage to play around with the settings. I was able to overclock the card to achieve relatively stable 2100Mhz (set 2150Mhz), while undervolting to 1125mV. I also upped the memory speed to 1900Mhz (15.2Gbs). My power draw averages 200W, 210W Max. I have set an aggressive fan curve (100% by 65degC) as I always have a big fan running in my room anyway, so noise isn't a problem. So I get well over stock performance at about the same power draw of the silent bios option. Max GPU temp (62degC), hot spot max (78degC).
Thank you for this, my nitro was really loud but this helped.
Can confirm. This helps. Thanks a mill!
Wow! Thanks! Maybe this is the way the card should have shipped! Definetly trying this. Cooler temps means longer lifetime and all around win.
Also your rig looks amazing! This is what I saw in my head when trying for a black/white build. This card goes nicely with it. I need white cables like that though!
Thank you this is exactly what I was looking for, legend.
Just got this card and I upgraded from a 980ti, also I just found out what undervolting was from this video and honestly this blew my mind.
great video! Just undervolted my card, using your guide, thanks mate
Glad it helped
This is a great video I enjoyed it a lot. I subscribed.
Hi! I just got myself one of these cards. I tried with you exact specs from this video and I got a better 3dmark Time Spy score. This video is quite old now, but did you find any other improvements on the settings? Which parameters do you think I should play around with first?
great video you helped me with my card which hit 90 degrees
So, this was fantastic. I had just replaced my 2 year old Gigabyte GTX 1070, which was a superb card. It ran very quiet and very cold even when overclocked.
I had been benchmarking the sapphire nitro+ today and trying all my games, Kingdom Come, Hell Let Loose, and i was getting frame chop among great frame rates at higher quality settings compared to the old 1070. I was watching my mhz output jumping all over the place. After your tuning advice it ran smoothly and the card was ultimately quieter and cooler.
Many thanks for your expertise!
I did want to come back and say that it turned out I was having some brown-out issues. Psu was stuffed and was causing issues. But I still use the manual changes because the amd card still had weird fan speeds and was burning up high speeds when the pc turned on.
@@627hjc respect for return
Honestly...this is the best I've came across so far. My 5700XT can now rest under 55-60C while gaming on max details and the noise levels are quite impressive!
AVG power draw?
@@salwaajulietaribixka2736 have the same model of 5700 xt nitro + and its around 200W
Would it improve things even more by upping the vram mem? Noticed you didn't touch that bit.
Thanks alot bro youre a life saver my gpu temperature just went from 85+ to maximum 75
I used your same profile for my Red Devil XT and it really lowered the temps a lot with almost the same power and quieter fans! I upped the fan speed a bit since they’re pretty quiet anyways and upped the clock speed slightly. Thanks for the video!
I have a choice to make: 5700xt red devil or 5700xt nitro+ ?? there's a slight difference in price, the red devil is slightly cheaper but I can't take a decision :P
Artur Pawel Wieczerzak I got red devil cause I was able to find it at an amazing price used on Amazon and I also just love the look of it. There’s barely any noticeable difference. Red devil is supposedly more quiet and better with temps while nitro can perform slightly better overclocked. However, using wattman in the Radeon apps makes it so you can make up for either cards shortcomings with simple tweaks so just get the one you want based on price and appearance.
@@brandonjohnson7613 Yeah for sure wattman makes it easy to tweak the card for best performance :D Thanks for the answer, I think I'll get the nitro+
so i tried these settings on my sapphire nitro+ same in vid. and games are just crashing with these settings. What can i do?
SirSenpaiii Actually, I eventually had to turn it back to stock values as heavy games caused me to crash too. I think this is due to my shit processor (i5 8400) making my gpu work extra hard and couldn’t compensate when I forcefully under-clocked. Try turning the voltage and frequency up first? I’m going to retry this profile when I get my 3700x.
What watercooling is that? looks good. Also im tempted to try this, i was looking for fan control since runing at 51 on idle seems a little too much for me. Funny tho, i ran the fan check and for the duration the temp went down to 41.
which watercooling did u had ? looked good
Thank you for your help brother! God bless!
More than welcome 👍
@@F7GOS I undervolted to 1900/1000 I feel like this is a great UV.
thanks works great very good settings 200watt @2118Mhz so far stable
This is the one of the best things us 5700XT owners could do. I undervolted and added 4 more 120mm fans to my case (noise doesn't bother me much). The combo has resulted in up to a 20C temp reduction depending on the game. I can now game without my gpu turning into a hot brick.
I‘m using: +20% power draw, 1999mhz @ 1031mv. These settings are 99,9% stable for me and work like a charm. Even in demanding games like RDR2 of NFS Heat the card is cool and quiet
Thanks my man!
Im as excited for these new drivers as I am when I first bought my 5700xt, RELEASE ALREADY! You're killing me with this wait AMD!
Already out to download them
I got about a 10 FPS boost in red dead. To me that’s huge.
I heard some people got lower results with the new drivers? Is it consistent in all ur games?
Chris Faliao Yeah my performance hasn't really changed, though it's perhaps not the best benchmark since I have mine undervolted as it's summer for me and its stupid hot.
Do you use the silent bios while undervolting or the normal one?
Thank you!
What program do you use to see the graphs?
Can you do a video with the new driver 12.19.3 If it did in fact solved most bugs? I'm hearing different results. Thx.
realy nice and helpful Video thx !
Hello, i just have a question about the voltage. How does the second parameter influences the millivolts of the third parameter? (I am talking about the 818, and the 1075 voltage). If I want to put the clock speed higher, how should I change this parameters?
Hey man, I saw your video about the asrock 5700 xt challenger and decided not to refund it after having some heat problems but they still occur after installing all drivers and new vBios do you have any idea what to do to make the challenger a bit cooler while ingame? It jumps to 100% when ingame and goes up to 80 degrees and has about 90-100 degrees around it which could damage my cables/tempered glass if it goes up even more sometimes. Do you have an idea what I could do?
I've had the Nitro+ for over a week now and I love it. I upgraded from my 4GB XFX 580 that ran at 80C (no junction temp sensor) and the Nitro+ runs at 65-70C with junction going up to 92 when I play Control maxed out settings. I've heard that the default fan settings need to be changed and I've messed around with them a bit to try and keep the card cooler. I've never messed around with graphics cards settings before so I'm trying to learn but am nervous to make changes. Should I leave it alone or is 92C junction temp too high. Raise the maxed fan setting some more maybe? When I remove tempered glass off the case the temp drops around 5-10C.
I've been wondering that maybe my case needs more ventilation, but it is a mid size case with exhaust fan in the back, 2 supply fans in the front and an open section on top with a perforated grill and magnetic dust catcher.
Won't hurt to tweak the fans a little. Most important thing is getting a balance that you are happy with regarding noise / performance and for that everyone is different. Undervolting even a little will also help drop the temps a bit too.
custom fan profile and opened case :)
Thanks to this I am now running my Nitro+ at 1075mv with 2150 set boost, Max Fan 50%
While running heaven benchmark at 1440p High, boost running a steady 2095Mhz, Peak GPU temp is 63c! Hotspot 77c, power draw is generally in the 180W territory.
Gonna see what I bump the memory to and if I need to bump the voltage up I have plenty of headroom in temp terms
Thanks!
Do you think I can use similar tweaks on my Red Devil 5700XT?
I wonder if you could get really good silicon maybe it works with -150 to -200mV what kinda of drop we would see in wattage
Thanks I tested this setup for my MSI 5700 XT Evolve which is a very noisy card and It worked, temps and noice level decreased.
Whats the CPU cooler you are using it looks cool.
U bought an Rx 5700 xt nitro+ special edition off overclockers for £5 more! I've not touched anything or tweaked it but I'm getting around 2075mhz at 74 degrees, but certain games struggle with GPU usage like escape from tsrkov.. is that a game optimization issue or a the card itself? Cheers
your video saved my life
Great video, unfortunately my luck was not with me. I tried following the steps in this video with my RAW II 5700XT and I get a drop in Clock speeds from 2000+mhz down to ~50mhz every 30 seconds or so in any game. It seems it doesn't matter what wattman tuning I do. Any help? Using the latest drivers from AMD
something that is not very clear to me is, did you use the tweaked primary BIOS or the tweaked secondary BIOS?
I'm not native english to understand it well, that's why I ask hehe
hey i did this and it worked very well so thank you very much. my one question is though, when i started my pc up for the first time after doing this, my fans were cranked past 3200 rpm until i went and turned tuning to default. when i switched it back to this profile, they didnt crank up. any idea? do i need to disable the profile before closing my pc? do i need to only apply the profile to games and not global tuning?
What was the best undervolt and overclocking on VRAM you got on the Nitro 5700XT? I got a maximum of 1830 at VRAM, above that, artifacts start to appear.
What driver version are you using?
In fact, the best result at VRAM was 1785. I was not lucky even with Nitro +.
I just picked up a xfx 5700 xt triple dissipation. Do you think this could work on mine fine?
Same goes for the MSI RX 5700 XT Gaming X, the Power Color Red Devil and the Asus ROG RX 5700 XT
So that's where I've been going wrong.
I've just picked up a reference 5700XT and tried tweaking its volts etc but it really didn't like me touching anything. Either my primary monitor would black-screen while my secondary still worked fine, or it'd just bsod immediately with even small tweaks.
Thanks to this, I realise i don't need to touch power or memory. Coming from an NVidia card, I've learned that more power = more better and that memory overclocks are good too.
Hello! I have a question. Does your Nitro make a grinding like sound when the fans start spinning? It's an obnoxious mechanical sound, as if the fans were scratching something. It goes away once the fans ramp up. Also I get this noise when the fans come to an almost complete stop. I don't know if my card might be faulty.
Same here,bought it just yesterday and at first I thought it was the fan blades grinding up against the plastic wrap when I first installed it in my system to test it before screwing it down.Seems to only be doing it after changing the fan curve through Adrenaline as you might have noticed even at a lower fan setting it seems to ramp them up to 50-60% first before dropping the rpms down to the selected level.I'm thinking of swapping the fans with the ARGB ones though,see how they gonna fare.
@@MrJimmysko If you do so I would appreciate an update!
Hi friend, I have the power color red devil rx 5700 xt and my computer restarts after 10 minutes playing call of duty, the graphic is out of stock, would you know why it could be?
Using your settings would nothing happen to the graph in the future? Thanks and I like your videos
wow, this is awesome !
That is some nice silicon you got there. My own 5700xt nitro+ does 2000mhz peak at 1.1v. At least I was able to get memory to 950mhz with ease.
did you set your target frequency at 2000mHz or is that what it is actually hitting? curious because I have a nitro+ as well and want see if I can reach that.
@@TheClutchman32 Sorry I am late but I set a 2000mhz target. ~1940mhz game clock. Not sure if dual monitor setups worsen overclock potential but here we are.
@@thetrashman5252 I got 2010mhz at 1.070v on my 5700XT Rog Strix. I still get pretty high temps, junction temp hits 100C and 80C on the GPU temp on long gaming sessions. But I should be good since 110C junction temp is the point where the GPU will throttle. Although I had hoped my Strix would do a little better than that. I have my fans running at 60% at 98C which translates to 2500RPM. And it's audible but not necessarily obnoxious.
@@amartje0108 Might want to check those temps, especially given the fact that you are probably not hammering core power consumption that much. I myself have a 2010mhz profile set for 1.125v and it reaches ~88C junction at 1500rpm. I eventually decided to settle on 1960mhz target clock (~1905mhz game clock) at 1.068v. It draws ~170w-180w on the core and reaches gpu junction temps of 79 degrees.
@@amartje0108 are you aware of the heatsink mounting issue that your card has? If not, please search youtube for this: Asus Strix Fix, Another Defective Radeon RX 5700 XT
Does the vbios matter for the card? Im on secondary bios and get a crash on game black mesa on 1100 mV
This still works in 2022. I used it for MW2 after I kept getting the GPU is to hot warning. After following the video the problem is gone. Thank you!! PS for 1080p and high frames this card is still good.
Yeah the 5700XT really performs well I'm MW2, glad it helped!
O wow!! Thanks!!
Got mine to 1000mV at 1920 mHz so it boosts around 1880 and it stays cool and quiet.
Hi, may ask you something about your GPU? Do you have any issue with it ? Cause I have same GPU like yours and I got low gpu usage issue on some games 😭😭
Same here
Are these tests done with dual monitors connected?
Great job as always. :) Could you make a undervolt/clock video with the Strix 5700xt?
dont buy that card ,or better dont buy any 5700 series,they have serious issues
Is it safe if I boost up MHZ to 2150 and then increase the voltage to 1115 (it then becomes proportionate to the 1075 voltage at 2070 MHZ)?.
I have a question: I notice an increase in latency whem undervolting. Do you notice the same?
I only had stutters, frametime issues and the card was blowing like crazy ingame @ 70°C (which is an okay temp but was achieved with max fanspeed). I also had a flickering once in a while no matter what I was doing. As well in Windows as in game the flicker occured in the right top of my screen. Doesn't happen with my old GTX770. Maybe it's a monday product, but if not that's it for me with AMD gfx...
I have a powercolor red devil, the amd program gives me the graph at 2095mhz and 1200v, your undevorlt works for my rx ?. Ie put my rx at 2095mhz and 1075v, greetings and thanks for your help.
Hey i just got my red devil, did this undervolt work well for you? I wanna try and drop some temps and noise a little
nice info, shared on discord :-)
Cheers Mike 😊
I have set my MSI 5700 XT Mech OC from 2100MHz / 1179mV to 1900 MHz / 950 mV. This resulted into performance loss of 2,5%, GPU temperature went down from 74C to 67C, memory temp from 90C to 82C and default automatic fan from 2500rpm to 2100 rpm.
Nice vid but i dont think worth... i mean you buy a nitro+ for undervolt and downclock? I have a 5700xt nitro on 2150/1800 @1.145 and in game go max 74°, but i think worth for an extra 5-6 fps. Ps. Max fan speed is on 45%
I'm using a red devil 5700xt. I've underclocked mine from 2050/1.200 to 1850/1.000, I could probably try 1900/1.000 in the future. It much more quieter than stock speed and I cannot see any performance losses
53 % Fan Speed is so f.... loud . I would like to reduce the fan noise. What settings can I use for lets say "underclocking/undervolting" but quieter fan?
How about for the XFX Thicc III Ultra?
awesome video mate i think i will try this with my Red Devil RX 5700 XT :D
Let me know how you get on 😊
what would be a good free benchmark for test the undervolt ?
Unigine Heaven lets you run on loop, which is useful for testing stability
still keeping this baby even after the 3000 release
I lied
@@WinforFame l;ol what did u get
Спасибо ,брат, мне очень помогла твоя конфигурация!!!Привет из России!!!)))
i have the sapphire pulse 5700 xt and im not overly savvy with over/underclocking.. i found an option in the AMD software to automatically undervolt my card.. will this achieve the same thing or close to?
965 mv at 1850 mhz.. 145 watt average consumption.. Actualy you can turn fans completely off vrm and gpu will be under 80 ° if case cooling is optimal
- 4 % less fps compared to the performance bios and 2039 mhz. (220 watt avarage)
- And around 7-9 % less fps compared to OC 2100 mhz and around 250 watt power consumption
That's a cracking undervolt!
@@F7GOS wasnt aware of that :)
I will try this on my card. Will be back and tell you how it went.
Nice...my Nitro+ always was 50 C idle and then rocketet to 95+ C and now it operates between 80 C to 88 C
how are you getting such high temps with a nitro? I can barely go over 70 C on the pulse. Or are you talking about junction temp?
@@butilikepizzatho4851 ...junction
I'd already set a more aggressive fan profile than in yours (idles at 25% but climbs up to 75% at 88C), but I've just lowered the voltage to 1100 :)
Ges my silicone is a bit worse as at 2024mgz settings I can only undervolt as far as 1.125v in order to be fully stable but its prefomence still went up and frequency matches the gpu in the video 1981mgz. I undervolted day 1 I got it 2 months ago and last month applied liquid metal to farther reduce temps now it maxes 73c on hotspot and 61c junction temp I think its called(at stock power limit). Have not gotten into overclocking yet I just maxed the power slider for now as it runs cool enough to suck all the power it wants.
Hi guys, I actually think that AMD did some aprovements on the RX 5700 XT with the new drivers. Before I had a score of aprox. 4700 in superstition Extreme Benchmark in stock settings, now I get 5100. Do you have the same experience? Got the Sapphire Pulse.
Superposition?
Hey @F7GOS, how is it stable in games? I can't wait for my Nitro+ to arrive to tweak it like you did
Rock solid for me 😊
@@F7GOS Happy New Year! I can undervolt it by 75mV max without crashing. How do you keep the manual voltage saved, it won't stay at the voltage I set it to, it keeps changing to 1200mV after restart
@@TheMatko Save the profile.
Is this applicable to new version of adrenalin?
Excuse me, are the settings on 4:52 I must copy to have the results like this?
Yep
I manage to get as low as 1700Mhz with 890W after doing some research online. Junction temperatures while gaming never gets higher than 75C and FurMark never got past 81C, with power draw never going over 180W. I was still getting 120FPS in Battle Front II which is fine because my 1440p monitor can do 75Mhz at most (I need it for more than gaming).
Hey is it right that rx5700xt can hold 110 junction temp??
Id like to ask about this card cause in my AMD adrenalin software i cant set my advanced control fan tuning to lower than 26 fan speed is there any bios switch i have to enable? 22.11.2 update
And i see my voltage drop to 725 but on advanced control i cant set it to 725 only goes to 750 strange
I was able to get a stable 910 mV undervolt at a clock speed of 1750 for my rx 5700 (non-xt). Now temps are in the 50s with fans completely silent.
Did you lose fps in game?
@@eldelotrodia1102 Not at all. I actually hit higher clocks with the undervolt and get a higher score on the Heaven benchmark.
my sapphire nitro+ SE has annoying coilwhine that starts at 100FPS I have to return that one (unfortunately)
Do one on the RX 5700 XT Taichi?
Just purchased the SE edition of this card, already having all sorts of issues. Seems if i attempt to run any opengl based stress test, or if i attempt to game on anything other than vulkan the card tanks the entire system. We're talking a full power outage short of the power LED on the front going off. It even kills the power to the RGB on the AIO cpu cooler.
Double checked everything with my older rx 570, issue is nonexistent. Currently utilizing the latest AMD drivers, 20.4.2. Went through all the proper steps to clear the drivers off using DDU in safemode. Any suggestions?
You may want to go and clear out your drives and then reinstall them. I have the same card and I'm not having any issues even with the undervolt. If that doesn't help send it back if you can and get a replacement.
may i know what's that cooler is ?
I have this mate and it runs VERRY HOT overclocked, 3 intake 120mms, 1 exhaust 120mm, ryzen 5 2600x, it fried my pci wifi card literally, hits 100c hotspot and 75c temps in 4 hours, but I've overclocked mine to 2.2ghz and 1900mhz mem, runs perfectly except it fried my other components in case running at 1.2volts, but its cool undervolted 1090volts 1995 core 1750 mem, fan profile 35 55 65 85
lol you think that you earning anything from that??the overclock only gives u lag lag and lag at your game.stay stcok and you will have better results after 2 hours gaming dont need to mention that your card will stay alive for longer
I've tried this on 2 of these exact cards. 1 crashed loading any game. The other it worked great and is 100% stable.
can you fix somehow undervolting the card thats crashing ?
@@AngryTheNikname Run it stock again
How does this translate to games? Is it even worth the time?
Does this work for power cooler red dragon 5700?