clearing codes and check engine light on alfa romeo giulia and stelvio after battery replacement
Вставка
- Опубліковано 28 вер 2024
- this is a tried and true method for clearing non active codes on the alfa romeo giulia and stelvio.
non active codes and check engine lights mean you have a check engine light from a condition that has since been fixed.
an example of this is after you replace a dead battery or after hooking up your battery when disconnecting during a service. the dead battery or kack of battery connection condition that causes the check engine light is no longer present so you can use this method to clear the code.
another example would be if you had a brief overboost or under boost condition that causes a check engine light but you rectified the cause. this will work to clear the code.
it will not clear codes for conditions that ate still present and causing the check engine light.
Man this is a life saver, I had my front bumper replaced and painted. I picked the car up drove one mile and Electronic Throttle Position sensor amoun others were on and the car was in limp mode. I was freaking out blaming the body shop. After watching your video I disconnected the negative terminal and waited one hour. I had to do this reset process and it worked no more lights and the car looks and runs perfect now! Thank you for this video your awesome!
Glad to hear it worked!
How did yours go away I'm having the exact issue after bumper replacement
Mine has the service electronic throttle control so ima try this see if I can't clear it and fix the problem
An absolute life saver 👍👍🫡🫡. Dead battery on my Stelvio Quadrifoglio- tons of warning codes!! Battery recharged and reconditioned, did the start/stop, accessories press x7, steering wheel left and right and bingo, codes gone, mode selector working as it should and engine warning light off.
👌👌🫡🫡👍👍
Thanks 1 million times. I had to disconnect the battery and all bells and whistles came on during start up. It worked!
I cant believe you only have a couple hundred upvotes. Extremely good info and good video you saved my ass man
Thanks for the feedback!
Thank you, worked just as described!! Had to do it twice but cleared all on the second attempt!!
Just tried it on mine and it worked perfectly!
Thank you!
My pleasure!
So did I, and I can confirm this works perfectly on Quadrifoglios as well.
Not mine 😢
@@kendalsaint1909 Try it again..take your time 🙂
Thank you worked like charm after ad blu warning and engine light came on even after refilling 😊
Thank u so much. Fixed fast and without dropping 💰 🎉
Awesome 👍
Thank you so very much. This also worked on my Guiletta. Top man. :)
Awesome 👍. Glad it helped
Actually worked. Thank you sir!
Now i have a throttle light on and my DNA button isn't working. I took it in for the same problem and the dealer said they just had to reset the codes. I wonder if I could do it myself. I did this code reset and it got rid of the little check engine light but not this throttle light
If it doesn't work clearing the throttle light there is something wrong with the car actively setting off the fault code. Id read the code with a scan tool and write it down so you can be knowledgeable about what the dealership should be fixing
As you're turning the wheel right you're saying full turn left. That's weird lol
Lol
@@bhvrdr this worked for me twice but yesterday it didn't weird. Just so you know I tried 10 times the ignition without the wheel turning and it worked !
It works great 👍.
Thanks.
Awesome!
Thank you!
Hey how did you get the tire pressure screen ?
MVP brother
You are awesome! Thank you! It works !
i see no matter what you do u will always face light in the dashboard ,(missing air from tyres)
Any tpms codes go away after driving if yu have air in the tires at the correct pressure
Is there a way to clear the electric parking brake in order for it to reposition?
The parking brakes work off of the hydraulics in this one so the engine has to be running to disengage
I had the same thing happen after an oil change did these steps cleared the service engine lights. Do recommend still taking in to be looked at
If all is well you should just be able to start it and drive it should clear all the codes next time you turn off and restart car
Not working at all. Recently had my bumper replaced and ever since I've had issues but nothing at all beforehand not a single code. Im legitimately considering selling it it's ridiculous
Didn’t work for me wtf am i doing wrong
Thx 👍😁🍻👊
This is kind of instructions I truly hate. Really infuriating.
Instruction - Put car into ACCESSORIES mode.
But lacks context Instruction of HOW to put car into this mode.
What is pressed? How long? In what order?
These self professed automotive geniuses have no clue on how to impart their Instruction.
Just infuriating.
Didn't work for me. Mine has an A! & a ⚡. Now I do a 10 times on off and clears them but then when I drive it comes back
It will only work if you don't still have an active issue causing the CEL. You need to read the trouble code and fix the problem.
Sorry my ignorance but what is accessory mode. What should I do exactly please?
Thank you so much, was already worried about going to the dealership 😅
My pleasure!
Omg it works thank you I ran out of gas this morning 😂😂
Awesome glad it worked out for you
'Corporate payable accounts, Nina speaking. ... Just a moment'
do you have to turnk left and right the steering wheel ?
Yes that resets the steering wheel fault code
Waste of time video
This helped me! Is there a reason of why the engine light and start stop button would turn on randomly? If the lights cleared after following this procedure, does it mean my car is fine?
It could be something as simple as a battery that got below the necessary voltage or it could be an intermittent fault that once it gets worse then you'll have to get it fixed because the light will stay illuminated and something actually needs to be repaired. If it comes back I would scan with a scan tool for the code that is causing the light to go off and that will tell you if it's a real issue or something simple
@@bhvrdr thank you for the feedback! I bought this car 2 weeks ago, it has 15,000 miles and it's a 2019 TI sport. Love the car but this light thing already scared me. Will probably have to invest in a scan tool! I did get an extended warranty for it so that might come in handy
Bro thank you! Tried to fix my ac and check engine light went on, i was about to give up and go to a mechanic. But this saved me
Awesome glad to hear it!
Worked like a charm! You saved me a trip to the dealership and a chunky bill 🙏🏻 thank you!
Turn on the car left lock right lock, center, turn off the car, turn back on.
Sometimes works. Most of the time it doesn't. I did that plus drove around 10 miles and they didn't clear.
Didn't think would work but it did! Engine light is gone and drive modes back after low battery troubles.
so if you clean the codes the scanner can not find them any longer ?
Only if you clear them with a scanner. Doing this just resets the faults. The codes will still show on scanner if the codes are still causing issues. If they were just low battery related codes then yes they clear themselves
Fixed my etc that wouldn’t come off.. thank you soo much thank you
Most important part you forgot was cleaning the battery posts and clamps first. Secondly you don’t need to turn it on and off seven times you simply need to turn it off once and back on running after you do the full left and right steering lock turn.
As you can see in the video turning lock to lock does not always clear the code at all. I have done that and nothing. Doing the start stop x7 is the easy way that works all the time with non active codes. Dealer techs use this method
Hey, it worked for most but I still have the Check Electronic Throttle control warning
Youre the BEST! Worked perfectly
After I got a oil change this is the only thing that worked. Thank you.
So how do you put it into ACCESSORY mode?
Pressing the Start Button once without the pressing brake
@@Tushawnn Thank you.
This doesnt work by mine Tonale. Is there another solition?
I did it many times and it works for me well
Does not still work, tried twice...
Where is the video on battery disconnect
Thank you for the video. Do you know if this applies to the QV models too?
What is the accessory mode
Best tutorial of all time ❤
Absolutely huge. Thanks sir!
Real wigga 🔥😂
Except
Does this work to clear the check engine, automatic start/stop unavailable? I only got the check engine after I ran out of gas and got the error electronic throttle control warning light. I got gas, that error went away but the other two didn't and it's not allowing to let me switch into the other modes.
Yes
@@bhvrdr Do you know if I will then be able to put the car into the other modes? As of right now it won't go into the other modes with that light on.
@@ffblegend yes. Once it's cleared you can change mode again
@@bhvrdr Thank you!
@@bhvrdrDo you know if it will clear the “Service CDC” error? I am getting that error after replacing the battery.
This is bullshit… just tried it on my Alfa Romeo Gulia 2.0L Ti sport and it didn’t work at all, I had better luck taking it to O’Rileys and having them use a code clearer with an OBD port for fuckin free😅😆 Do whatcha gotta do lmfao
It will not clear hard codes as indicated. Just temporary soft codes
Do they clear the hard code the the electric parking brake?
@@justinnnnnn4945 only if the fault is no Ionger present. If its from changing pads and the brake was disconnected you may need a pro scan tool
@@bhvrdr okay cool man thanks!
Thank you so much, I replaced the battery of my son’s car and he was very upset because of the error codes, I did your procedure and all lights were turned off and now my son is very happy because we save $250.00 that wanted charge the dealer and he has his car back and I am most happier than he.