raWr fishing 06/18/2019 Got my two new Fishband Brilliant GH-100 reels a few days ago, they arrive quickly from China to my surprise. Both reels had no visible flaws as yours did in the paints finish. However, both drags were very stiff and hard to adjust. When I opened the reel, I found that the reel was full of grease but the main gears had none. I cleaned both reels and added a light coat of grease to both carbon fiber drag washers and main gears. This made the drag smooth as silk. The parts diagram included with the reel was not correct for the GH-100 and was for an entirely different reel. I then discover that one reels brake-adjusting wheel was stiff and hard to adjust. I add a drop of oil thinking it would free up the wheel. I put it back together and cycled the adjusting wheel. It freed up the wheel and at setting five, the brake assembly drum fell off inside the spool. (S.O.B.) I was really pissed, but now I laugh about it. Under very close inspection, I discovered at some point someone used super glue to hide the fact the reel was defective. I contacted the seller and they gave me a link to order a replacement side-plate brake assembly for $.01 a penny. Before you upgrade to high-speed bearings, try cleaning the stock ones. Blow them clean with compressed air and reel oil. Repeat a few times and the stock bearing work much better. I spooled up the good GH-100 with 50-meters of Piscifun 6lb Lunker Braid .06mm diameter. This line is .0025-thousandth of an inch diameter. It is soft and teeny-tiny, I add a 2-gram weight and with the brakes set at 2.2 it cast it about 80ft.using a Tusrinoya 5½ft extra-ultralight (C562UL) rod. However, the XF-50 can do this too. The GH-100 makes it easier because the brakes seem more responsive. But, my XF-50 never fell apart. Time will tell which is better. Note: I contacted the seller and explained the Reel Description was not correct. It has since changed. It no longer shows the brake system and does not describe the material used for the frame. There is a difference between the GH-100 and GH-150 pictures. GH-100 has a carbon fiber crank handle and the GH-150 shows a metal handle. The GH-150 is also sold by Mad Mouse it shows the GH-150 brake system and it is different from the GH-100.
good lord. i think i now need to take mine apart completely to see the insides. the gears doesn't feel like it have no grease... I hope i still got my shimano drag grease somewhere. So you opened both reels up right? were both of them ungreased? I just looked at my schematics and it appears that it is the 150 instead of a 100... I hope to be able to successfully put it all back together. i never liked opening baitcaster reels.. So now you have one broken while one is working condition. I also hope in time that the reel can hold up. I will certainly clean the bearing before getting new bearings hearing about this. I just did so for my XF50 and it's night and day for casting. feels super smooth.
raWr 06/18/2019 They are easy to open but do not pry on the case take out the four screws. Three are the same and the one on the bottom of the other side is longer. To free the case taps lightly with your plastic screwdriver handle while wiggling the case and will open. It has two plastic studs that hold it from falling open. Easy peasy It looked like your reel has a stiff drag too. I could tell by seeing the drag adjustment star. So it may be a good idea to take a look. You can get a good line counter for $7.50 on AliExpress and they save lots of money in wasted line. (Buy 2), two bags of plastics cost more and they only last a little while. Piscifun ONYX braid is on sale for $5.62 for 274meters and I tie it on without any leader because you do not need one. It comes in yellow, blue, green, white and black. If you have, a BFS large-diameter spool 160 feet of line is all you need unless you hook a Tarpon. Besides it makes longer casts, one spool will reline a reel five times. If you try guessing, good luck with idea. Three spools cost $16.70 and you get 875-meters of line. Hell it costs that much for one spool of Suffix and I like this braid better.
i like how your 2nd response is now 6/16 lol. you went back in time? :P yeah it was a tad bit stiff. I think i'll take account to drag testing too for future videos for new reels. and i can't find my drag grease anywhere :( time to spend money again!!!!! If i do go braid, i'll definitely get a counter, but now my guesses are pretty good LOL. By the way, i don't see the price nor spool size you have mentioned of the Piscifun. But i got deals for sufix and rapala stuff, still expensive tho...
@@rawrfishing I just order some from Piscifun Official Store 274m spool $5.62. I think you will like the GH-100 just fine if holds up as well as your XF-50. If you are not sure about the line just get some to try. I lke the price and it works.
Gizmo Carr Today when I was casting my reel it started making a Zoop sound and it started feeling gritty. I went to Cabellas and they confirmed something was wrong and it may be the bearing. They greased it but it didn’t do much. Do you reckon I had a faulty bearing or I messed it up casting too heavy of lures?
I got one of those a few weeks ago and I was pretty impressed. The brakes are very powerful. The only thing I wasn't a fan of is the composite frame. In my experience aluminum frames last longer, but for light duty - trout, crappie, and river smallies it might hold up well enough for the money. I have been experimenting with the aftermarket ultralight spools for the Daiwa tatula 100. The tatula 100 is 6.9 ozs with the relatively heavy factory spool (17+ grams). I picked up an 11.5 gram sv type spool for it, it isn't the lightest or the shallowest spool available for it but I really love the versatility /range of weights it can handle. I have under 200 in the reel, spool, and ceramic bearings and it will handle 1/16- 1/2 Oz with ease and comes in at around 6.7 Oz.
I am totally on the same page with you on how i Feel, until i read a comment from Gizmo. Scroll up (or down) and look what he found about his gears not being lubed up nor the Drag discs. Although mine doesn't feel crazy like his, I feel that I should open it up and see what is going on. If this fails on me, I will also go your rout to the Tatula. I am sure everyone would wanna see that done :)
Braid will make casting even easier, good idea for video maybe doing a comparison ??? try to stay in the .10 to .14mm range and you will not regret it. Great vid again sir
I may but I would rather leave these to pro tech folks who would have double setups. That would be costly lol. Also need a line counter... ton of things to buy lol
I don't think it's a feasible thing to do after thinking about it. Especially with a new setup because you never know how far you can actually cast a specific lure. With that said, how much line should you spool onto the reel? Too much means you made it heavier, too less means you screwed up completely and you need to start over, wasting even more line. Also for testing, we push the casting to the limits in some ways. I have shown how many times i backlashed for a reason, we want to see exactly how much brakes we need to use. If you have a terrible backlash... you are donion like a peeled onion!
@@rawrfishing On shallow spool it makes little different, example: I want to put 4-5lb 0.17-0.18mm for 50 meter on my Aldebaran BFS, the box said 1 turn handle = 80cm so it will be 5000cm ÷ 80cm = 62.5 turn, you probably miss a meter or two but it doesn't really matter for the shallow spool. Mostly I did 60-63 turn.
Only for testing purposes to show how well the brakes were. Even in the windy condition. Sure i back lashed a lot during test but I am sure it would be better of i use 2+ brakes.
It all depends on your jig size and plastic you use, but for the Bass pro shop's glass rod, yes, but the Tsurinoya C472UL is fine as i have used it before with no issues casting. The issue comes when you set the hook tho as these hooks are thicker than finesse lures.. WHICH is why I have started to look for a L or ML fishing rod for BFS fishing!
that is because it's really difficult to say as everyone uses this reel differently. If you will be casting light lures like me, you won't need more than 70ft of line if you think about it. How far can any reel cast 1/32 or 1/16 oz lures? you just need enough to cast your lure at the maximum distance, then add in say about 25% more to buffer for changing lures or snags/snap/cut line from toothy fishes. i know i didn't give you a direct answer, but that's just how it is!
@@rawrfishing thanks mans, that's actually better than nothing. I don't plan on casting too far out since the spot I plan on using it has thousands of crappies during spawning season. Sadly my local post office lost my rod so I won't be able to test this soon.
@@torment6369 oh wow! Try 4lb test line and maybe 1/3 of the spool. First timers should find it easier to cast and untangle with less line. Hope u get ur rod soon. If u got a bass pro near ya, u might be able to get a casting glass rod for 20 bucks. It's the yellow rod I used
@@rawrfishing you're on the same page as me concerning this. I cast as far as i can, then count the number of complete handle turns to get my lure back, then spool on that plus 25% or a round number near that. with a light shallow spool, you don't want much more than you need.
Ciao non so l inglese volevo chiederti se lo consigli questo mulinello da bfs o attualmente ce ne sono di migliori su Aliexpress?? Cerco un mulinello da bfs su Aliexpress!
Thank god for Google Translate! I think this is not that bad given if you are throwing 2 grams and above. I normally throw around 2.75-3 grams and it's relatively good! Clean out the stock bearing oil and use high performance bearing oil and it should work even better. Lastly, you can swap out the bearings for either Ceramic Hybrid Bearings or the BFS Air Bearings from Hedgehog Studios! An alternative is the Tsurinoya SpiritFox. These two reels are great at it's price.
IMHO, I think the GH100 is a great budget reel, but it doesn't come out of the box perfect. With upgraded cleaned or upgraded bearings, it would do much better! also adding some drag grease would make it smooth. I am going to review the new KastKing BFS reel soon, but until then, I can't recommend that without using it :P In addition, The KastKing New BFS reel isn't readily available at the moment and you would have to wait. If you can't wait, Order GH100 and perhaps either ceramic hybrid bearings or micro bearings, if you can find them!
@@rawrfishing Wow thanks, your reply very enlightening, with all upgrades you mention kts seems worth but I think I'll wait the KK Zephyr... I'm going to see you new video of KK Zephyr, that's thing is beauty, and it worth to wait it comes to global market.
no problem man! I just unboxed the reel, but hoping to be able to go out this weekend to cast it! finding time is tough with family home during the covid 19!
For some it's a style, to me its accuracy for doing under hand casts and low to the water. If u ever look up bfs fishing for trout in japan... you will realize how crazy it can get. Also some folks use this for other styles of fishing like drop shot fishing. Less line twists. Lastly, people also use this for crank baits, I just tend to go to the extreme of casting 1/32 oz put lot of people love to throw 1/8th range lures
my first pet peeve with spinning reels is line twist (causing looping around the spool). Thought snap swivels were supposed to help with that. Another is reel wobble from the imbalance of the bail spinning. Baitcast, zero line twist and very smooth, effortless reeling in. My right hand has nerve damage from a neck injury and surgery 3 years ago and my index finger and thumb on my casting hand are almost useless for fishing. I've been casting a baitcaster with both hands, left thumb on the spool (gotta fish, right?), for about a year and can cast most lures further than I use to cast with a spinning reel. I started with a $40 KastKing Royale Legend (which I think is a great reel, esp at $40). There's a version 2 now. I don't know about that one. Then I got a Daiwa Tatula SV TW 103 for $128 at amazon near black friday. Nice reel too. There are 3 reasons for getting a line tangled reel. Once you learn how to use your adjustments, you'll know how to limit overruns and backlashes. My 9 year old is still using a push button spincast reel. When he's ready, he'll go straight to baitcast and skip spinning. Though I didn't know the term for it then, my initial interest in baitcasting was BFS. In my search for that type of fishing, I found youtube"s REEL TEST and discovered he was on the same mission. Been reading reviews like raWr Fishing for the ultimate BFS set up. Though, I may have already found the setup I want. What I already have. I will never ever order anything from AliExpress again.
Please try the new fishband clamber hyper micro(crhm06),another bfs came from fishband,i heard some review said it was the best for it price range, able to cast 1.5g lure for more than 25m with stock bearing. I hope to see your review about it. Also the weight of the reel plus minus 150gram. It suit you to play UL game.
@@rawrfishing i from malaysia. Here it has official store which sell fishband product. Im not sure if it sold to overseas. You can check 'ifishband anglers club malaysia' @ facebook, join the group. The official seller named 'Chai Ming Jye'. Maybe you can ask him to ship overseas. Also trt check the official facebook page.
Have you had a chance to de-grease the bearings yet? I have the two spool shaft bearings on my GH-100 soaking as I type. They have been there for almost 24 hours now. It doesn't seem like the grease is coming out the way you might expect. I see that both bearings are shielded. I don't think they are sealed though. Wondering how long you need to soak them.
Shake it and empty it and degrease 2nd time maybe? I have been focused in snakehead fishing as it's a bit weeded up to fish bfs these days. I can check my notes lol
Casting is smooth. Carbon disc drag was unlubed. Although can work without it, I ended up taking it apart and lubed it. I also found that all of the big gears were under lubed. Glad I have taken it apart as I have lubricated it up. If it weren't for these factors and the over caked and dirty grease on the bearings. I would have given it a 9 out of 10. But for the average folks who doesn't take reels apart... perhaps a 8 or even 7... which is still good in my books. Bfs on the rise!
Oh boy definitely going to need to pick one up for myself up here in West Virginia I bet that would be a good lil trout and smallmouth rod bet I’ll be able to cast a spoon and spinners a good distance
@@fordpowerstroke2849 Always wanted to try the New River around the gorge/bridge. Never been there. How's the smallmouth fishing there? Would I need the jet drive for that or is prop ok?
Man try the Kuyin Teton UL 6’3 (AliExpress) I got one and is a sweet setup with the Xf50, I just order last week the GH100 to see what’s up with it lol...
I may try it but given the price point i have chosen my Tsurinoya C472UL instead. We'll see.. we'll see. they are from Hong kong So that's pretty cool!
i'll think about it. Still too expensive. I got a good rod at the moment and rather explore reels. But I will reach out to them probably closer to mid summer to prepare for fall trout. See if they wanna do something w/ a content creator over from the states ;) Thank you for the suggestion as yours have now bumped this rod up and above few others ;)
@@sgtpavlov Other than the price LOL.. given that you can technically get the XF50 20 dollars cheaper at some stores... we shall see, I am doing a ton of more testing and I just cleaned my bearings off the XF50 and it's SMOOTH
Remember i told you i bought the gh150, i still haven't found anyone that would sell me the plate and spool separately I message 2 more sellers so im just waiting for an answer back. Also i should just test out the gh150 with regular line and pole and lures to see if its any good for a regular bait casting reel. Too bad im not really a youtuber like you or i would just do a review on the gh150.
hmm that stinks man. Well i think it's a good idea to give it a shot and see how well it is. who knows, maybe it's a great reel! :) and you are not missing much on the YT world lol. IG is where it is at now for fishing
I was using a Copolymer. KastKing 4lb Fluorokote. I have a feeling i may have left out that on the video lol. I will add it to the description. Thx for watching and dropping a line bud! www.amazon.com/KastKing-FluoroKote-Fishing-Percent-Fluorocarbon/dp/B017AR85Y8/ref=as_li_ss_tl?ie=UTF8&linkCode=sl1&tag=rawfis-20&linkId=93245880e6eb4c2bfc87d91ac713eb3d&language=en_US
I just got the reel but wasn’t sure how much line to put on the spool. So basically I just filled it like a normal reel. Do you know how much line the spool can hold? And how much should I put on it?
I also filled it to the top because I don't have a line counter. I think The Reel Test done casts with a lot of BFS lures. It really depends on what weight u want to cast. For instance, if can only cast a lure at 50 ft, no point of putting in 200 ft of line. keep it around 75
sounds good! what's ur rod that you have chosen? I just bought a new rod too LOL.. not gonna spoil it but it's not light as the two i have now. Still within the BFS realm tho
I have a ton of bucket Brigade following my channel. everyone looking for that spot for easy loading up on fish.. kinda sucks sometimes being a content creator... spots can get invaded easily!!!
I can careless of spooking fish for this outing as the purpose was to cast, not catch. In addition, i chose a terrible day to do this test. The wind was horrible. However, I have done way more casts than was portrayed in this video. The amount of backlash isn't a lot once it is tuned. With that said, I don't think it is bad as you think. casting 1/16 oz on a baitcaster is no easy task. I can assure you that if you cast things heavier, there are literally no problem. Lastly, if you pay attention, I push the reel to the limits by using least amount of brakes as possible. You can CERTAINLY turn the brakes up WAY more. Again, this was all for testing purposes. If i were to fish, i would tune it properly per each lure. Thank you for watching and dropping a line.
mine was a piece of junk. after one day the stool stopped turning when the handle rotated. at first the spool only turned when the drag was the tightest. later, it stopped working completely even tho the line guide moved side to side. i took a look inside. holy shit, what a piece of junk. i've been inside a daiwa, shimano and kastking and the mechanism of this fishband gh100 was nothing like them. it was $58 and after shipping and other charges, 66.70. not worth $10
I heard it was a hit and miss for them. I totally agree with the internals. I had to apply grease myself since they did a poor job at doing so. it was pretty dry inside. My GH100 still working great today since i took it apart to tune it up.. it now have ceramic hybrid bearings on it as well. Good news is that this reel does work well if it was properly put together, which in turn, have gotten attention of other companies to jump on the GH100 bandwagon. You will see a ton of these reels on the market, but the question is, which one would produce the best quality one out of the box?
@@rawrfishing I was really pissed the day i wrote that. Still not real happy about it. It worked ok the first day I used it, though I only made about 30 casts as I happened to pass the river while I was out. Then the next day at home, I was just taking a look at it, testing the drag, then all of a sudden the handle locked up. I gently wiggled the handle, pushed the cast release trigger and it finally released, but now the spool didn't turn when the handle freely moved along with the line guide. I took it apart and the main problem was the brass cylinder gear didn't interlock with the large disk gear. That small white plastic yoke looking thing where the 2 springs are wasn't supporting the brass gear tight enough. Also that first day when a press the cast trigger with my thumb. the spool would automatically backlash (no lure on the line) and the line would feed into the space between the spool and the housing and wrap around the spool axle, just a weird thing to happen. I messaged AliExpress that I wanted to return it for a refund. Now I find out the cheapest I can return to china is $30. Now the realization of AliExpress sets in. If what you order doesn't work, you're screwed. They offered (I accepted) half a refund and keep the reel or full refund with return and I pay shipping. What a choice. So I thought to sell the spool on ebay to someone whose reel does work that wants to line a spool of different pound test. And also sell the other parts to make back some loss. But last night I opened it again, thinking maybe it wasn't assembled correctly. With their schmatic I checked for all the parts and there were a lot of differences. I took it apart 3 times to various stages trying a change here and there. Finally I gave up and put it back to it's orginal assembly and tightened the drag as tight as it could go. It's working decently now though I haven't fished with it yet. I don't expect much. If it acts up again, that spool will be on ebay for $20
@@roy32006 yeah i really hate returns there. but I would see if you can negotiate a partial refund instead of full and shipping it back and in return you can give them a better review. Otherwise, write your honest review and tell them how they wouldn't want to help resolve a product issue. I know there are many resellers on AE, so a bad review can hurt small stores! so they would likely work with you or else, they will just be shooting themselves in the foot...
I dunno the 200 but the gh150 is not bfs. It's a different spool and a different braking system on the side plate. So dont order the bigger one and try to swap spools
Well as mentioned during the unboxing video, It is a budget bfs reel after all with minor physical issues that I have found so far. Wonder how long it will last but its performing well
My GH-100 feels solid and consistent, there are a lot of plastic parts but they all fit snugly together (at least on mine). I own reels costing a lot more that don't seem to be any better made except they use more metal. Now I'm not sure of it's overall longevity or how much use it can take before it starts having problems. I try not to abuse my equipment and all of my reels (some more than 10 years old) are still working fine with just a little routine maintenance.
raWr fishing 06/18/2019
Got my two new Fishband Brilliant GH-100 reels a few days ago, they arrive quickly from China to my surprise. Both reels had no visible flaws as yours did in the paints finish. However, both drags were very stiff and hard to adjust. When I opened the reel, I found that the reel was full of grease but the main gears had none. I cleaned both reels and added a light coat of grease to both carbon fiber drag washers and main gears. This made the drag smooth as silk. The parts diagram included with the reel was not correct for the GH-100 and was for an entirely different reel. I then discover that one reels brake-adjusting wheel was stiff and hard to adjust. I add a drop of oil thinking it would free up the wheel. I put it back together and cycled the adjusting wheel. It freed up the wheel and at setting five, the brake assembly drum fell off inside the spool. (S.O.B.) I was really pissed, but now I laugh about it. Under very close inspection, I discovered at some point someone used super glue to hide the fact the reel was defective. I contacted the seller and they gave me a link to order a replacement side-plate brake assembly for $.01 a penny.
Before you upgrade to high-speed bearings, try cleaning the stock ones. Blow them clean with compressed air and reel oil. Repeat a few times and the stock bearing work much better.
I spooled up the good GH-100 with 50-meters of Piscifun 6lb Lunker Braid .06mm diameter. This line is .0025-thousandth of an inch diameter. It is soft and teeny-tiny, I add a 2-gram weight and with the brakes set at 2.2 it cast it about 80ft.using a Tusrinoya 5½ft extra-ultralight (C562UL) rod. However, the XF-50 can do this too. The GH-100 makes it easier because the brakes seem more responsive. But, my XF-50 never fell apart. Time will tell which is better.
Note: I contacted the seller and explained the Reel Description was not correct. It has since changed. It no longer shows the brake system and does not describe the material used for the frame. There is a difference between the GH-100 and GH-150 pictures. GH-100 has a carbon fiber crank handle and the GH-150 shows a metal handle. The GH-150 is also sold by Mad Mouse it shows the GH-150 brake system and it is different from the GH-100.
good lord. i think i now need to take mine apart completely to see the insides. the gears doesn't feel like it have no grease... I hope i still got my shimano drag grease somewhere. So you opened both reels up right? were both of them ungreased? I just looked at my schematics and it appears that it is the 150 instead of a 100... I hope to be able to successfully put it all back together. i never liked opening baitcaster reels..
So now you have one broken while one is working condition. I also hope in time that the reel can hold up.
I will certainly clean the bearing before getting new bearings hearing about this. I just did so for my XF50 and it's night and day for casting. feels super smooth.
raWr 06/18/2019
They are easy to open but do not pry on the case take out the four screws. Three are the same and the one on the bottom of the other side is longer. To free the case taps lightly with your plastic screwdriver handle while wiggling the case and will open. It has two plastic studs that hold it from falling open. Easy peasy
It looked like your reel has a stiff drag too. I could tell by seeing the drag adjustment star. So it may be a good idea to take a look. You can get a good line counter for $7.50 on AliExpress and they save lots of money in wasted line. (Buy 2), two bags of plastics cost more and they only last a little while. Piscifun ONYX braid is on sale for $5.62 for 274meters and I tie it on without any leader because you do not need one. It comes in yellow, blue, green, white and black. If you have, a BFS large-diameter spool 160 feet of line is all you need unless you hook a Tarpon. Besides it makes longer casts, one spool will reline a reel five times. If you try guessing, good luck with idea. Three spools cost $16.70 and you get 875-meters of line. Hell it costs that much for one spool of Suffix and I like this braid better.
i like how your 2nd response is now 6/16 lol. you went back in time? :P yeah it was a tad bit stiff. I think i'll take account to drag testing too for future videos for new reels. and i can't find my drag grease anywhere :( time to spend money again!!!!! If i do go braid, i'll definitely get a counter, but now my guesses are pretty good LOL. By the way, i don't see the price nor spool size you have mentioned of the Piscifun. But i got deals for sufix and rapala stuff, still expensive tho...
@@rawrfishing I just order some from Piscifun Official Store 274m spool $5.62. I think you will like the GH-100 just fine if holds up as well as your XF-50. If you are not sure about the line just get some to try. I lke the price and it works.
Gizmo Carr Today when I was casting my reel it started making a Zoop sound and it started feeling gritty. I went to Cabellas and they confirmed something was wrong and it may be the bearing. They greased it but it didn’t do much. Do you reckon I had a faulty bearing or I messed it up casting too heavy of lures?
I got one of those a few weeks ago and I was pretty impressed. The brakes are very powerful. The only thing I wasn't a fan of is the composite frame. In my experience aluminum frames last longer, but for light duty - trout, crappie, and river smallies it might hold up well enough for the money. I have been experimenting with the aftermarket ultralight spools for the Daiwa tatula 100. The tatula 100 is 6.9 ozs with the relatively heavy factory spool (17+ grams). I picked up an 11.5 gram sv type spool for it, it isn't the lightest or the shallowest spool available for it but I really love the versatility /range of weights it can handle. I have under 200 in the reel, spool, and ceramic bearings and it will handle 1/16- 1/2 Oz with ease and comes in at around 6.7 Oz.
I am totally on the same page with you on how i Feel, until i read a comment from Gizmo. Scroll up (or down) and look what he found about his gears not being lubed up nor the Drag discs. Although mine doesn't feel crazy like his, I feel that I should open it up and see what is going on. If this fails on me, I will also go your rout to the Tatula. I am sure everyone would wanna see that done :)
For $50 if it last me one year saltwater fishing that is fine for me. The plastic frame should hold up longer than the bearings or gear.
ok.I will buy this!!thanks for review
Watch my latest video! There is vast improvement from bearing upgrades
And thx for watching
Braid will make casting even easier, good idea for video maybe doing a comparison ??? try to stay in the .10 to .14mm range and you will not regret it. Great vid again sir
I may but I would rather leave these to pro tech folks who would have double setups. That would be costly lol. Also need a line counter... ton of things to buy lol
@@rawrfishing I wish The Reel Test would use braid for casting or do comparisons
I don't think it's a feasible thing to do after thinking about it. Especially with a new setup because you never know how far you can actually cast a specific lure. With that said, how much line should you spool onto the reel? Too much means you made it heavier, too less means you screwed up completely and you need to start over, wasting even more line. Also for testing, we push the casting to the limits in some ways. I have shown how many times i backlashed for a reason, we want to see exactly how much brakes we need to use. If you have a terrible backlash... you are donion like a peeled onion!
@@rawrfishing
On shallow spool it makes little different, example: I want to put 4-5lb 0.17-0.18mm for 50 meter on my Aldebaran BFS, the box said 1 turn handle = 80cm so it will be 5000cm ÷ 80cm = 62.5 turn, you probably miss a meter or two but it doesn't really matter for the shallow spool.
Mostly I did 60-63 turn.
@@vire559 that's a good way go estimate! But these Chinese reels... not all of them have an estimate for us lol guess I can measure myself
You're brave using such little braking. The past couple days I found that I needed to keep brakes on the GH100 at 2 or higher.
Only for testing purposes to show how well the brakes were. Even in the windy condition. Sure i back lashed a lot during test but I am sure it would be better of i use 2+ brakes.
Nice review! 👏
thx lisa! this will be a fabulous rod/reel for trout fishing. i can't wait to use it this fall!
That Ned rig seemed a bit too heavy for an ultralight rod
It all depends on your jig size and plastic you use, but for the Bass pro shop's glass rod, yes, but the Tsurinoya C472UL is fine as i have used it before with no issues casting. The issue comes when you set the hook tho as these hooks are thicker than finesse lures.. WHICH is why I have started to look for a L or ML fishing rod for BFS fishing!
Nice video and nice reel for bass fisherman
Thx man but im not using it for bass fishing most of the time ;) afterall i am a crappie fisherman LOL (but no body knows that)
HAAAHAHAHA, that catch at 9:00 was GREAT!!
I get excited in some of my catches! got a bit of Ike in me!
How much line should be spooled on this reel? New to BFS and for some reason I can't seem to find the answer to that anywhere lol.
that is because it's really difficult to say as everyone uses this reel differently. If you will be casting light lures like me, you won't need more than 70ft of line if you think about it. How far can any reel cast 1/32 or 1/16 oz lures? you just need enough to cast your lure at the maximum distance, then add in say about 25% more to buffer for changing lures or snags/snap/cut line from toothy fishes. i know i didn't give you a direct answer, but that's just how it is!
@@rawrfishing thanks mans, that's actually better than nothing. I don't plan on casting too far out since the spot I plan on using it has thousands of crappies during spawning season. Sadly my local post office lost my rod so I won't be able to test this soon.
@@torment6369 oh wow! Try 4lb test line and maybe 1/3 of the spool. First timers should find it easier to cast and untangle with less line. Hope u get ur rod soon. If u got a bass pro near ya, u might be able to get a casting glass rod for 20 bucks. It's the yellow rod I used
@@rawrfishing you're on the same page as me concerning this. I cast as far as i can, then count the number of complete handle turns to get my lure back, then spool on that plus 25% or a round number near that. with a light shallow spool, you don't want much more than you need.
@@roy32006 that's a good way to estimate your line! I should seriously get a cheap line counter.
Ciao non so l inglese volevo chiederti se lo consigli questo mulinello da bfs o attualmente ce ne sono di migliori su Aliexpress?? Cerco un mulinello da bfs su Aliexpress!
Thank god for Google Translate! I think this is not that bad given if you are throwing 2 grams and above. I normally throw around 2.75-3 grams and it's relatively good! Clean out the stock bearing oil and use high performance bearing oil and it should work even better. Lastly, you can swap out the bearings for either Ceramic Hybrid Bearings or the BFS Air Bearings from Hedgehog Studios!
An alternative is the Tsurinoya SpiritFox. These two reels are great at it's price.
I like you video since KastKing Prototype comes to my UA-cam Suggestion...
So, for my first budget BFS what will you sugest? This or KastKing?
IMHO, I think the GH100 is a great budget reel, but it doesn't come out of the box perfect. With upgraded cleaned or upgraded bearings, it would do much better! also adding some drag grease would make it smooth. I am going to review the new KastKing BFS reel soon, but until then, I can't recommend that without using it :P In addition, The KastKing New BFS reel isn't readily available at the moment and you would have to wait. If you can't wait, Order GH100 and perhaps either ceramic hybrid bearings or micro bearings, if you can find them!
@@rawrfishing Wow thanks, your reply very enlightening, with all upgrades you mention kts seems worth but I think I'll wait the KK Zephyr... I'm going to see you new video of KK Zephyr, that's thing is beauty, and it worth to wait it comes to global market.
no problem man! I just unboxed the reel, but hoping to be able to go out this weekend to cast it! finding time is tough with family home during the covid 19!
What do you think is the benefit of using this vs a open-faced spinning reel?
For some it's a style, to me its accuracy for doing under hand casts and low to the water. If u ever look up bfs fishing for trout in japan... you will realize how crazy it can get. Also some folks use this for other styles of fishing like drop shot fishing. Less line twists. Lastly, people also use this for crank baits, I just tend to go to the extreme of casting 1/32 oz put lot of people love to throw 1/8th range lures
my first pet peeve with spinning reels is line twist (causing looping around the spool). Thought snap swivels were supposed to help with that. Another is reel wobble from the imbalance of the bail spinning. Baitcast, zero line twist and very smooth, effortless reeling in. My right hand has nerve damage from a neck injury and surgery 3 years ago and my index finger and thumb on my casting hand are almost useless for fishing. I've been casting a baitcaster with both hands, left thumb on the spool (gotta fish, right?), for about a year and can cast most lures further than I use to cast with a spinning reel. I started with a $40 KastKing Royale Legend (which I think is a great reel, esp at $40). There's a version 2 now. I don't know about that one. Then I got a Daiwa Tatula SV TW 103 for $128 at amazon near black friday. Nice reel too. There are 3 reasons for getting a line tangled reel. Once you learn how to use your adjustments, you'll know how to limit overruns and backlashes. My 9 year old is still using a push button spincast reel. When he's ready, he'll go straight to baitcast and skip spinning. Though I didn't know the term for it then, my initial interest in baitcasting was BFS. In my search for that type of fishing, I found youtube"s REEL TEST and discovered he was on the same mission. Been reading reviews like raWr Fishing for the ultimate BFS set up. Though, I may have already found the setup I want. What I already have. I will never ever order anything from AliExpress again.
Im from Malaysia. . This reel is awesome bro. .
thanks man! this reel is pretty good, but need some lovin w/ the grease. came pretty dry!
Ya same my reel too. .
@@winrosestudio sounds consistent with what everyone I have spoken with! As long as u have added your own lubrication, it should be good!
Hard to lube this reel , or not ?
@@phongphanp same as any other reel
Please try the new fishband clamber hyper micro(crhm06),another bfs came from fishband,i heard some review said it was the best for it price range, able to cast 1.5g lure for more than 25m with stock bearing. I hope to see your review about it. Also the weight of the reel plus minus 150gram. It suit you to play UL game.
Ooz new one eh? I would love to when it is available on aliexpress. I think its only on shopee right now and that is country specific.
@@rawrfishing yup just launch oct/nov. I just buy one today.this weekend im going to try it. Hope the best for the reel.
@@marshalstrakencz nice! Where did you get it from?
@@rawrfishing i from malaysia. Here it has official store which sell fishband product. Im not sure if it sold to overseas. You can check 'ifishband anglers club malaysia' @ facebook, join the group. The official seller named 'Chai Ming Jye'. Maybe you can ask him to ship overseas. Also trt check the official facebook page.
Have you had a chance to de-grease the bearings yet? I have the two spool shaft bearings on my GH-100 soaking as I type. They have been there for almost 24 hours now. It doesn't seem like the grease is coming out the way you might expect. I see that both bearings are shielded. I don't think they are sealed though. Wondering how long you need to soak them.
Shake it and empty it and degrease 2nd time maybe? I have been focused in snakehead fishing as it's a bit weeded up to fish bfs these days. I can check my notes lol
Don't waste your time, use a small fish hook and pop the retaining rings off the bearing shields, blast them with some degreaser and your done.
Does this have a drag clicker?
I don't remember. It's one of those reels that I have retired early since no matter what I did, it was a bad reel.
This reel also doesn't work properly for left hand reels. Braking module was made wrong for left hand reels
How smooth is the reel? I noticed it had a supported pinion gear.
Casting is smooth. Carbon disc drag was unlubed. Although can work without it, I ended up taking it apart and lubed it. I also found that all of the big gears were under lubed. Glad I have taken it apart as I have lubricated it up.
If it weren't for these factors and the over caked and dirty grease on the bearings. I would have given it a 9 out of 10. But for the average folks who doesn't take reels apart... perhaps a 8 or even 7... which is still good in my books. Bfs on the rise!
Do they make that reel on a right side for reeling
Yeah they do my friend!
Oh boy definitely going to need to pick one up for myself up here in West Virginia I bet that would be a good lil trout and smallmouth rod bet I’ll be able to cast a spoon and spinners a good distance
@@fordpowerstroke2849 do it man! I should try single hook spoons
raWr Fishing yeah im looking at them online right now going to put one in the cart
@@fordpowerstroke2849 Always wanted to try the New River around the gorge/bridge. Never been there. How's the smallmouth fishing there? Would I need the jet drive for that or is prop ok?
Man try the Kuyin Teton UL 6’3 (AliExpress) I got one and is a sweet setup with the Xf50, I just order last week the GH100 to see what’s up with it lol...
I may try it but given the price point i have chosen my Tsurinoya C472UL instead. We'll see.. we'll see. they are from Hong kong So that's pretty cool!
Yes they are bro, if you try one you’re going to like it, very well made...
i'll think about it. Still too expensive. I got a good rod at the moment and rather explore reels. But I will reach out to them probably closer to mid summer to prepare for fall trout. See if they wanna do something w/ a content creator over from the states ;) Thank you for the suggestion as yours have now bumped this rod up and above few others ;)
raWr Fishing your welcome, 🐠 on! Brother.
isn't that 180 cm, 5'11" ? I've been waiting on mine. I'm hoping it's more than 6'.
Looks good, I'd like to get my hands on one of those reels.
I have one to say about it that was not good out of the box, but its fixable... talk about it in a future video
@@rawrfishing it's still better than the xf50 at least.
@@sgtpavlov Other than the price LOL.. given that you can technically get the XF50 20 dollars cheaper at some stores... we shall see, I am doing a ton of more testing and I just cleaned my bearings off the XF50 and it's SMOOTH
raWr Fishing When do you reckon you will release the video?
@@statuswashere probably within two weeks... too many thunderstorms. Went out the past few days with the xf50.
Remember i told you i bought the gh150, i still haven't found anyone that would sell me the plate and spool separately I message 2 more sellers so im just waiting for an answer back. Also i should just test out the gh150 with regular line and pole and lures to see if its any good for a regular bait casting reel. Too bad im not really a youtuber like you or i would just do a review on the gh150.
hmm that stinks man. Well i think it's a good idea to give it a shot and see how well it is. who knows, maybe it's a great reel! :) and you are not missing much on the YT world lol. IG is where it is at now for fishing
@@rawrfishing maybe you can do a comparison if you can buy the other reel and do a video. =D
nah i'll pass on that :P
raWr Fishing IG?
raWr Fishing IG?
Are you using 4 pound mono?
I was using a Copolymer. KastKing 4lb Fluorokote. I have a feeling i may have left out that on the video lol. I will add it to the description. Thx for watching and dropping a line bud! www.amazon.com/KastKing-FluoroKote-Fishing-Percent-Fluorocarbon/dp/B017AR85Y8/ref=as_li_ss_tl?ie=UTF8&linkCode=sl1&tag=rawfis-20&linkId=93245880e6eb4c2bfc87d91ac713eb3d&language=en_US
I just got the reel but wasn’t sure how much line to put on the spool. So basically I just filled it like a normal reel. Do you know how much line the spool can hold? And how much should I put on it?
I also filled it to the top because I don't have a line counter. I think The Reel Test done casts with a lot of BFS lures. It really depends on what weight u want to cast. For instance, if can only cast a lure at 50 ft, no point of putting in 200 ft of line. keep it around 75
raWr Fishing True! This is my first baitcaster so I’m learning.
@@statuswashere wow u sent straight to bfs for your first bait caster? Kudos to u. Casting light lures on bait casters is no easy feat!
raWr Fishing I just wanted to be able to catch any fish in the body of water I’m fishing so I went with BFS.
sounds good! what's ur rod that you have chosen? I just bought a new rod too LOL.. not gonna spoil it but it's not light as the two i have now. Still within the BFS realm tho
Dare you to tell what Town. 😍. shhhh...
LOL i see what you have done there :P
What pond is that.
A dead one lol... over fished pond in Daretown...
@@rawrfishing Thanks
I have a ton of bucket Brigade following my channel. everyone looking for that spot for easy loading up on fish.. kinda sucks sometimes being a content creator... spots can get invaded easily!!!
cooL!
isn't it? :)
Come on bro - dont scare the fish away. Fish on man... I am not sure about that reel now - hmmm the back lash is serious on this reel
I can careless of spooking fish for this outing as the purpose was to cast, not catch. In addition, i chose a terrible day to do this test. The wind was horrible. However, I have done way more casts than was portrayed in this video. The amount of backlash isn't a lot once it is tuned. With that said, I don't think it is bad as you think. casting 1/16 oz on a baitcaster is no easy task. I can assure you that if you cast things heavier, there are literally no problem. Lastly, if you pay attention, I push the reel to the limits by using least amount of brakes as possible. You can CERTAINLY turn the brakes up WAY more. Again, this was all for testing purposes. If i were to fish, i would tune it properly per each lure. Thank you for watching and dropping a line.
mine was a piece of junk. after one day the stool stopped turning when the handle rotated. at first the spool only turned when the drag was the tightest. later, it stopped working completely even tho the line guide moved side to side. i took a look inside. holy shit, what a piece of junk. i've been inside a daiwa, shimano and kastking and the mechanism of this fishband gh100 was nothing like them. it was $58 and after shipping and other charges, 66.70. not worth $10
I heard it was a hit and miss for them. I totally agree with the internals. I had to apply grease myself since they did a poor job at doing so. it was pretty dry inside. My GH100 still working great today since i took it apart to tune it up.. it now have ceramic hybrid bearings on it as well. Good news is that this reel does work well if it was properly put together, which in turn, have gotten attention of other companies to jump on the GH100 bandwagon. You will see a ton of these reels on the market, but the question is, which one would produce the best quality one out of the box?
@@rawrfishing I was really pissed the day i wrote that. Still not real happy about it. It worked ok the first day I used it, though I only made about 30 casts as I happened to pass the river while I was out. Then the next day at home, I was just taking a look at it, testing the drag, then all of a sudden the handle locked up. I gently wiggled the handle, pushed the cast release trigger and it finally released, but now the spool didn't turn when the handle freely moved along with the line guide. I took it apart and the main problem was the brass cylinder gear didn't interlock with the large disk gear. That small white plastic yoke looking thing where the 2 springs are wasn't supporting the brass gear tight enough. Also that first day when a press the cast trigger with my thumb. the spool would automatically backlash (no lure on the line) and the line would feed into the space between the spool and the housing and wrap around the spool axle, just a weird thing to happen. I messaged AliExpress that I wanted to return it for a refund. Now I find out the cheapest I can return to china is $30. Now the realization of AliExpress sets in. If what you order doesn't work, you're screwed. They offered (I accepted) half a refund and keep the reel or full refund with return and I pay shipping. What a choice. So I thought to sell the spool on ebay to someone whose reel does work that wants to line a spool of different pound test. And also sell the other parts to make back some loss. But last night I opened it again, thinking maybe it wasn't assembled correctly. With their schmatic I checked for all the parts and there were a lot of differences. I took it apart 3 times to various stages trying a change here and there. Finally I gave up and put it back to it's orginal assembly and tightened the drag as tight as it could go. It's working decently now though I haven't fished with it yet. I don't expect much. If it acts up again, that spool will be on ebay for $20
@@roy32006 yeah i really hate returns there. but I would see if you can negotiate a partial refund instead of full and shipping it back and in return you can give them a better review. Otherwise, write your honest review and tell them how they wouldn't want to help resolve a product issue. I know there are many resellers on AE, so a bad review can hurt small stores! so they would likely work with you or else, they will just be shooting themselves in the foot...
@@rawrfishing Good idea, thanks!
What does he say at the start Fishband 200 ?
That isn't BFS 🤔
I dunno the 200 but the gh150 is not bfs. It's a different spool and a different braking system on the side plate. So dont order the bigger one and try to swap spools
Like, friend!
thx man!
Bass Pro Shop crappie Maxx Signature Series rod
Wait... is that a casting rod?
Yes it is.. I mentioned it to you on Instagram too
@@chrismccarta4305 cool, it's hard to keep track there lol literally ton of comments a day
I understand that just giving you a suggestion
@@chrismccarta4305 I know, I was just saying I may have missed that or forgotten. Ty for the suggestion
What is the diameter of the spool?
not sure, you can look them up on aliexpress.
@@rawrfishing I get it. Thank you!!
@@user-bv5zw5qc1u
@@rawrfishing I also bought this reel. Thank you for the good advice.
@@user-bv5zw5qc1u have fun with it :)
😁👍
,,\/,(^_^),\/,,
Hey man! Show up your happy face for a few secs!
Lol I may do a few of those in future videos. Fair warning. I have gained some weight lol... getting older....
The reel seems to be cheaply made
Well as mentioned during the unboxing video, It is a budget bfs reel after all with minor physical issues that I have found so far. Wonder how long it will last but its performing well
My GH-100 feels solid and consistent, there are a lot of plastic parts but they all fit snugly together (at least on mine). I own reels costing a lot more that don't seem to be any better made except they use more metal. Now I'm not sure of it's overall longevity or how much use it can take before it starts having problems. I try not to abuse my equipment and all of my reels (some more than 10 years old) are still working fine with just a little routine maintenance.