70 Camaro SS Project | MSD 8.5mm Spark Plug Wires Custom Length

Поділитися
Вставка
  • Опубліковано 25 лип 2018
  • Making custom MSD 8.5mm spark plug wires for dads 70 Camaro SS project.
    Things that might help with a project like this:
    Aluminum Wire Separator: amzn.to/3FIYlr0
    Plug Kit: amzn.to/35ZiuYF
    Plug Wire Crimper: amzn.to/2PfmP4c
    This video contains affiliate links, which means that if you click on one of the product links and buy, I'll receive a small commission.

КОМЕНТАРІ • 30

  • @mossman381
    @mossman381  4 роки тому +1

    Things that might help with a project like this:

  • @thetriode
    @thetriode 4 роки тому +3

    You are correct that the ends are "flipped;" The funky tops on the spark plug side (in your case) is because there's a retainer plate on a stock HEI that keeps the wires from popping off. Looks good by the way. In your case it makes sense though as you don't use the retainer plate and those ends look better as you said. The only caveat is that at least on my small cap (OEM TBI/TPI style) distributor one end was too long so it would push the terminals off the cap. YMMV of course.

  • @SierraOne
    @SierraOne 5 років тому +2

    Looks Great!

  • @gman1035
    @gman1035 5 років тому +1

    Custom wires are the only way to go, also best time to use boot protectors. MSD makes a great wire, cant wait to here that engine run friend. Also I run my boots with the MSD logo on the plug, but I believe you changed them around. You have been putting in a lot of wrench time, thank you for sharing.

  • @gonzo7188
    @gonzo7188 5 років тому +1

    That looks clean. Awesome job.

  • @hotrodder5034
    @hotrodder5034 4 роки тому

    I use the 8.5 MSD wire with NGK plugs on my 95Z28 Camaro. Good wires no problems. Nice and clean engine btw.👍

  • @jefflindsey9589
    @jefflindsey9589 5 років тому +1

    Coming together. Looking good...

  • @sethh8365
    @sethh8365 5 років тому +1

    That engine bay looks better and better the further it comes along

  • @chrisdimitrijevic9243
    @chrisdimitrijevic9243 4 роки тому +2

    Hey Mossman . what is the kit or manufacture for the Aliminum Wire loom bracket

  • @Edbert2004
    @Edbert2004 3 роки тому +1

    Just a Ford guy chiming in...sure is easier to measure and cut the length precisely when the dizzy is right up front.

  • @speedbuggy7240
    @speedbuggy7240 3 роки тому

    Hey mossman 381, where did you get the wire holders from? You get it all done and running?

  • @tomjacka7401
    @tomjacka7401 2 роки тому

    the wires gothe other way.and theres a cap for the wires on rhw distributor. but it realy dont matter the way you have it is fine.

  • @milkhouse01ja
    @milkhouse01ja 4 роки тому

    Where did you get the holders for the wires?

  • @vezina808
    @vezina808 2 роки тому

    Where did you get your wire separators?

  • @1hernandez78
    @1hernandez78 3 роки тому

    How's the car running it's been a while since the video 👍

  • @robertcowan8211
    @robertcowan8211 4 роки тому

    YOU RICHARD

  • @dennisgetz8879
    @dennisgetz8879 3 роки тому

    =