If the frame does not have mounts for disc brakes, it is better to leave the V-brake, just install a better mechanism or pads. There are adapters for frames without disc brake mounts, but it is better not to install them as it is risky
I love it! I'm in the same situation, planing to upgrade the drivetrain and the brakes. Frame and fork already have disc brake mounts, but i didn't know how to rout the brake hose. Drilling the cable holder is fantastic idea! Do you think default length of 1700mm back and 1000mm front needs to be shortened? And how would you route the front hose? I have suntour fork with IS mounts but no routing clips...
Thank you for the feedback. You don't have to drill the frame, you can find commercially available mounts that are glued to the frame. Put the brakes on the bike and it will become clear whether you need to shorten them, as all frames are different, for different heights and different wheel diameters. There are no problems with attaching to the fork, and the adapter for IS mounts is not expensive. I wish you success!
This is the same as buying a new wheel, as the hub will also have to be replaced. As a result, the cost of a simple wheel or spoke set with rim, hub and spokes will be about €50
Bonjour!! Je voudrais faire la même modif sur mon vélo et je voulais savoir si c’était possible d’avoir une roue en 27,5 à l’arrière et une en 26" à l’avant? Car je voudrais passer en 27,5 à l’avant aussi mais je dois changer ma fourche pour mettre des freins à disques.
❤ If you liked this video,
🙏 share this video with your friends
📈 it will help the development of the channel!
❓ ask your questions
Cool Upgrade Nice Work 👍👍👍
Show me a conversion campaign on a bike without disc brake mounts
Woahhh thanks for the detailed video bro, i will upgrade soon
if you liked this video,
share this video with your friends ❤️
it will help the development of the channel! 📈
A starych hamulców nie oddaje się klientowi?
simple when wheel and frame allready set up for discs
If the frame doesn't have disc brake mounts, it's better to take your chances with different adapters
❤ the video. Enjoyed this morning while drinking my 1st cup of coffee. Keep up the good work
Like always, nice job.
Hello, what degreaser do you use in a small sprayer, which you just wipe off with a paper towel?
Isopropanol is poured into a small sprayer
what if my bike doesn't have that piece to put the disk? 4:30
If the frame does not have mounts for disc brakes, it is better to leave the V-brake, just install a better mechanism or pads. There are adapters for frames without disc brake mounts, but it is better not to install them as it is risky
Great video, many thanks
I love it! I'm in the same situation, planing to upgrade the drivetrain and the brakes. Frame and fork already have disc brake mounts, but i didn't know how to rout the brake hose. Drilling the cable holder is fantastic idea!
Do you think default length of 1700mm back and 1000mm front needs to be shortened? And how would you route the front hose? I have suntour fork with IS mounts but no routing clips...
Thank you for the feedback. You don't have to drill the frame, you can find commercially available mounts that are glued to the frame. Put the brakes on the bike and it will become clear whether you need to shorten them, as all frames are different, for different heights and different wheel diameters. There are no problems with attaching to the fork, and the adapter for IS mounts is not expensive. I wish you success!
Do all bikes have that dock for the disc hidden like that ? I bought a disc brake and I gave up because I didn't have the center lock for it.
There are more simple mounts for 6 bolts, the centre of the lock, as you find less often
Eline saglik yanliz arka tekermi yoksa ön beraber
Sorunuzu gerçekten anlayamadım.
@@NiceBikeService sadece arkayimi yaptiniz dedim yoksa ikisimi tesk
müşteri bitmiş bisikleti teslim aldı. her iki fren de değiştirildi
Is this expensive to replace old rim to disk brake?
This is the same as buying a new wheel, as the hub will also have to be replaced. As a result, the cost of a simple wheel or spoke set with rim, hub and spokes will be about €50
Bonjour!!
Je voudrais faire la même modif sur mon vélo et je voulais savoir si c’était possible d’avoir une roue en 27,5 à l’arrière et une en 26" à l’avant? Car je voudrais passer en 27,5 à l’avant aussi mais je dois changer ma fourche pour mettre des freins à disques.
Ottimo lavoro
I need to do this
Good luck with your work!
What about shifters?
that's a topic for another video)
Price of whole set consumebles required please reply
I Love it ❤
Super ich bin am überlegen mein Oldtimer umzubauen. Ich hoffe es klappt. Auf so ein scheiss komm ich nur im Urlaub
Vielen Dank für Ihren Kommentar und ich wünsche Ihnen eine erfolgreiche Fahrradreparatur💪🚲.
But we don't have disc option 😢
👌👍
Why the hammer on the handle ?
@@NiceBikeService when you are loosing the screw when you bleed, , you whag it first
Zeigt mal so eine Umrüstaktion bei einem Bike ohne Scheibenbremsenaufnahme
Brake shifters needs to be changed
that's a topic for another video)
Marketing strategy
😂👍
Is this bike mechanic mute? Or deaf?
He is very shy 🤭
⚠ ❓ ⚠
*ASK YOUR QUESTIONS*
👇👇👇
Where do i get the little thingy , i cannot fit my brake pads
Can you make a video for tiagra hydrolic maintenance?
teszt nélkül nem ér
Слава Україні!!