this is a DAMN detailed video on dismantling of bb bearing for servicing...every of the video angle are well documented and his servicing skillset is marvelous👍
Great to see something being restored rather than thrown away and replaced (as seems the norm in this era before we’re finally forced to look after our planet). Would have loved to see/hear the cranks spinning on the bike before/after.
I only throw away broken ones... if it can be salvaged. Will do that first but will hv a new one on the ready. The old one can be used on another old bike that u can give away in working condition.🎉
Geez Man! You're an artist! Your videos are amazing! And it's a very good approach to sustainability, not to immediately buy new and throw away the old, but to save, renovate and repair what we can. Of course I share.🤘
Impressive video production! One day maybe, when I am retired with a proper workshop. I have built a few home-made bearing presses and it is an absolute headache to find the right parts (let alone for the extraction process which always requires specific dedicated parts).
Agree. Reinstalling a bearing that has been pressed out isn’t a good idea. Also, a full contact sealed bearing is suitable for this application because the old bearing operated in dirty and wet conditions. While on the subject of bad ideas… Never, ever, spin a dry bearing. Especially with compressed air because the rotational speeds can be very high. Zero lubrication means metal-on-metal contact. When un lubricated, cages can score bearings and races. Most bearing manufacturers specify a 1/3 fill of grease. Anything more than that will add drag and squeeze out past the seals during use… and attract dirt.
And probably a new bearing of a higher quality. Standard they're mostly of a mediocre quality. Bearings that are in a shape like this one, most of the time are having to much slack after cleaning. And that is costing efficiency too. And then there are the bearings in the pedals too. Most of the time they can't be serviced at all.
Very nice video - just what I was looking for. It might be cheaper to buy a new BB than to pay for full servicing but it sure is fun to do it yourself and feel satisfied with your work on your own bike.
@@GoodBicycle Soul and skill, all those comments for cheaper to buy can't fix a broken chain without master link on their never flat carbon wheelsets... In fact, freshly packed BB is a must-to-do on a brand new rig, don't have to believe me just take it apart and find yourself Why? little recommendation at your procedure, at the very last step with the external protective coat try to spray some dry silicone instead of grease - it should last till next interval with the added benefit of no dust collecting. Cheers
You'd be surprised at inadequate level of grease in brand new bearings on suspension pivots and bottom brackets. I think it's good practice to always at least disassemble to check the grease for new bearings.
👍👍👍👍👍mükemmel bir işçilik,çekimler süper ve herşeyi gösteriyor,sizin gibi işinde uzmanlaşmış,teknik insanlara bisikletimin bakımlarını yaptırmak isterdim,,,
9:30 Greasing your bearings. An effective but messier method to ensure you get grease to all parts of your bearing is to put some grease on the edge of your non dominant palm. About the mid point between your small finger and the heel of your hand opposite your thumb. Then using your dominant hand, lay the ball bearing part of the bearing on the grease and then press down and drag the bearing towards you, using both the pressing down and dragging of the bearing, while also pressing back with the edge of your non dominant palm, to press the grease into the bearing. Then rotate the bearing slightly and repeat till you've done the whole bearing and you can see grease coming out of all parts of the bearing on the side facing you. Repeat for the other side of the bearing and you should have grease applied to all parts of the bearing that need grease. Replenish the grease as required during all stages of the above process.
To all the people who say just replace bearings i live in NZ cant get bearings alone have to replace whole crank set $1200 i think ill clean mine out !
Hola, me gustan muchos tus videos, siempre aprendo mucho de ellos. Me gustaría saber donde se consigue la pieza para desmontar las balinesas que mostraste en el video
¡Estamos encantados de ser de utilidad! Gracias por sus comentarios! 😘 Las herramientas especializadas siempre se pueden encontrar en mercados online o clasificados
Very nice and detailed video ! I love the camera ! I open the BB to clean it and i found that is pressHand (it comes off with the chainrings) ! Its a new type? Lol i dont need that BB tools anymore :D
Let's just say that if the bearing is dirty, it is definitely already worn.) In fact, it should be replaced with a new one. but the theme of the video is that the bearing can still work for a while if it is well maintained).
Bearings with rust do always have small damage, dents, and play. New ones are widely available. But if you have an old bike, you could do this. I would not recommend.
Wow I didin't even know you could take these things apart! Nice trick at 3.15 using crankset! I haven't got any of the other tools to do the job though.
Está muy bueno el vídeo pero me gustaría saber que ingredientes usa para limpiar los rodamientos. El nombre de cada líquido que usa por ejemplo alcohol o algo así por el estilo. Por qué en cada país tienen nombre diferente. Saludos desde Cúcuta Colombia 🇨🇴🚲👍 Ya tienes un suscriptor más 👍
Gracias por sus comentarios. Efectivamente, hay algunos problemas con la disponibilidad y las traducciones de distintos componentes en diferentes países. Utilizamos combustible de camping para limpiar componentes muy sucios y grasientos. Para desengrasar (en el vídeo, una lata con pulverizador), utilizamos isopropanol.
Not necessary to release the bearing outside. Just remove one rubber. Put all the area in a fluid to clean. Shake it to release the dirt. Dry it and lubricate it. Easy! Alternative buy 2 new bearing for 3-4 dollars and change.
Appreciate the process and i felt ita therapeutic in someway. Would love to do this on my bike with the proper tolols.. I wish to know what is the tool called for removing the bearing or a similar product link?
tool - is DIY Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈
detergente per il lavaggio di motori a combustione interna se ti è piaciuto questo video, condividi questo video con i tuoi amici ❤️ aiuterà lo sviluppo del canale! 📈
Nice.... the fact that they can be dismantled means they can be repaired and reused. I do repairs but will hv a new one on hand in case the repaired doesn't last. 🎉
Bien video, pero ya que retiras la balinera, seria mejor colocar una nueva, no es necesario retirarla para realizar la limpieza y engrase, deberías también fomentar el uso de protección de las manos, como guantes de nitrilo o látex.
@@GoodBicycle los químicos te pueden afectar la piel. Usa unos quirúrgicos que te queden justos y le aplicas talco internamente para que sean fácil de colocar.
Très bonne vidéo sur l'entretien des roulements BSA, je pratique ainsi depuis des années sur mes VTT. Par contre les roulements dans votre vidéos ont trop subi de corrosion pour être rattrapés. Les billes sont corrodées et leur état de surface a été endommagé à jamais, elles ne seront plus jamais aussi lisses que des billes neuves même après un nettoyage / regraissage, et le roulement ne sera plus jamais aussi fluide qu'un neuf en charge. Vu le prix d'un roulement acier neuf, le plus simple est de changer les roulements par des neufs pour retrouver une vraie fluidité. Mais sinon merci pour votre vidéo très bien réalisée.
If the bearing is pressed out only by the inner ring, it is destroyed. Then it makes no sense to clean and lubricate it, it is better to put a new one. As you can see in the video, the new one is pressed behind the outer ring and that's right.
베어링 씻어봤는데...잘 안 씻기고 오히려 더 뻑뻑해지는 느낌도 있고 .. 그냥 새베어링으로 바꾸는 것이 비용 시간 적인 면에서 훨씬 좋을 것 같습니다. 물론 대충 그냥 타는 자전거라면 대충 씻어주고 대충 그리스 바르면 되겠지만 완벽해지길 원하면 그냥 새것으로 교환이 좋아요.
Hola ..No se puede hacer girar el rodamiento en seco, se raya la pista..La grasa va limpiando la pista para q las boliyas corran bien sobre la pista.. cuando hace ruido el rodamiento no sirve mas.. no tiene arreglo..
Hola. Si el pedalier es de Shimano, entonces el sistema hollowtech y el cuadrado serán más o menos de la misma calidad. Los ejes de pedalier hollowtech chinos serán de peor calidad que los cuadrados, pero depende de tu suerte
Infelizmente, não posso dizer-vos. É uma ferramenta que temos na nossa oficina há vários anos. Tente pesquisar por "ferramenta de prensagem de rolamentos Hollowtech II
@@GoodBicycle: Marine grease, being used on boats and boat trailers, is better. The reason why is because marine grease repels water, which cuts down on corrosion.
Or you can replace that sealed cartridge that comes with new bearings for only $20. One side is L.H. thread, other is R.H. thread, that state "Do Not Disassemble".
Hai smontato il movimento centrale per pulire i cuscinetti due cuscinetti sigillati nuovi costano circa 25 euro non facevi prima cosi ? E' sei anche piu' sicuro?
Basically an informative video, but i wouldn`t recommend removing a bearing by applying pressure to the inner ring (at least if your intention is to reuse the bearing), cause this loads the balls of the bearing in a way the bearing is not designed for. Always remove a bearing by applying pressure to the outer ring that attaches to the fit of the bearing
Retirando de esa forma el sello, aplicas demasiada fuerza, retiralo con una pequeña aguja o pinza de electrónica redonda plana, no se dañan los labios de esta manera.
![Как устроены швейные машинки? [Veritasium]](http://i.ytimg.com/vi/FFW0GcMCgd0/mqdefault.jpg)
❤ help the channel get better!
🚀 share this video with your friends
❓ ask your questions
I desperately want this gentleman to perform this on my bike. How satisfying to watch!!
Thank you for your comment! 😍
I'm a little confused. You didn't install your own bottom bracket?
this is a DAMN detailed video on dismantling of bb bearing for servicing...every of the video angle are well documented and his servicing skillset is marvelous👍
Thank you for your comment! 😍
if you liked this video,
share this video with your friends ❤️
it will help the development of the channel! 📈
It is very well photographed but some of the methods shown in refurbishment are incorrect.
Great to see something being restored rather than thrown away and replaced (as seems the norm in this era before we’re finally forced to look after our planet).
Would have loved to see/hear the cranks spinning on the bike before/after.
Thank you for your comment. Sadly, not the entire repair process was captured in the video
I only throw away broken ones... if it can be salvaged. Will do that first but will hv a new one on the ready. The old one can be used on another old bike that u can give away in working condition.🎉
Hexagonal Boron Nitride powder with Molybdenum Disulfide grease.
Maintenance is excellently explained. Unfortunately, those bearings have a lot of play and they have to be changed.
thank you for your comment! 😘
Beyond Bike mechanics and maintenance this is professional quality video and sound effects.
Thank you for your feedback! 😘
Remember, if the bearings are not glowing red after the ride then you are not outputting enough power and you need to train more
😍😍😍 👍
Geez Man! You're an artist! Your videos are amazing!
And it's a very good approach to sustainability, not to immediately buy new and throw away the old, but to save, renovate and repair what we can. Of course I share.🤘
Thank you for your comment!
Share my videos with your friends, it will help the development of the channel! 😘
ottimo lavoro. Apprezzo anche la scelta di non rovinare il video con inutile sottofondo musicale. Grande!
Thank you for your comment! 😍
if you liked this video,
share this video with your friends ❤️
it will help the development of the channel! 📈
great vid ! no bad music in bg and good pics !
Thank you for your comment! 😍
if you liked this video,
share this video with your friends ❤️
it will help the development of the channel! 📈
Impressive video production! One day maybe, when I am retired with a proper workshop. I have built a few home-made bearing presses and it is an absolute headache to find the right parts (let alone for the extraction process which always requires specific dedicated parts).
Thank you for your feedback. May your dreams come true😄
Servicing sealed bearings that have corrosion like that in them seems a bit pointless to me. I would have sourced new bearings. Fully sealed ones.
you don't always have a new part on hand to replace it.
And pitted bearings and races feel bad even after all this hard work.
This…
Agree. Reinstalling a bearing that has been pressed out isn’t a good idea. Also, a full contact sealed bearing is suitable for this application because the old bearing operated in dirty and wet conditions.
While on the subject of bad ideas…
Never, ever, spin a dry bearing. Especially with compressed air because the rotational speeds can be very high. Zero lubrication means metal-on-metal contact. When un lubricated, cages can score bearings and races.
Most bearing manufacturers specify a 1/3 fill of grease. Anything more than that will add drag and squeeze out past the seals during use… and attract dirt.
And probably a new bearing of a higher quality. Standard they're mostly of a mediocre quality.
Bearings that are in a shape like this one, most of the time are having to much slack after cleaning. And that is costing efficiency too.
And then there are the bearings in the pedals too. Most of the time they can't be serviced at all.
Very nice video - just what I was looking for. It might be cheaper to buy a new BB than to pay for full servicing but it sure is fun to do it yourself and feel satisfied with your work on your own bike.
Thank you for your views and comments. It is indeed sometimes easier to replace the entire bottom bracket, but we have shown one of the repair options
Very nice video. Also the greatest advertisement for BB30 bottom brackets (provided your frame is within tolerances, unfortunately many are not).
Thank you for your comment. For some reason, BB30 is not such a popular standard and it is not always easy to find cranks for it
Good to know as a hobby thing, in the shop all that labor is so expensive that you can get 5 new bottom brackets with that price.
it's for the soul.)
@@GoodBicycle Soul and skill, all those comments for cheaper to buy can't fix a broken chain without master link on their never flat carbon wheelsets...
In fact, freshly packed BB is a must-to-do on a brand new rig, don't have to believe me just take it apart and find yourself Why?
little recommendation at your procedure, at the very last step with the external protective coat try to spray some dry silicone instead of grease - it should last till next interval with the added benefit of no dust collecting. Cheers
You'd be surprised at inadequate level of grease in brand new bearings on suspension pivots and bottom brackets. I think it's good practice to always at least disassemble to check the grease for new bearings.
@@kersh4wI pull apart every Shimano BB and add grease and adjust cones
👍👍👍👍👍mükemmel bir işçilik,çekimler süper ve herşeyi gösteriyor,sizin gibi işinde uzmanlaşmış,teknik insanlara bisikletimin bakımlarını yaptırmak isterdim,,,
Thank you for your comment! 😍
If you liked my videos ❤️,
support the channel financially 💰🙏.
Use the "Membership" / "Sponsor" function on UA-cam ✊😘
The sounds that everything made in your video made me laugh, very well done👌👌🙏🙏
thank you!
but what kind of links are we talking about?)
Most u can get online...
9:30 Greasing your bearings.
An effective but messier method to ensure you get grease to all parts of your bearing is to put some grease on the edge of your non dominant palm. About the mid point between your small finger and the heel of your hand opposite your thumb.
Then using your dominant hand, lay the ball bearing part of the bearing on the grease and then press down and drag the bearing towards you, using both the pressing down and dragging of the bearing, while also pressing back with the edge of your non dominant palm, to press the grease into the bearing.
Then rotate the bearing slightly and repeat till you've done the whole bearing and you can see grease coming out of all parts of the bearing on the side facing you.
Repeat for the other side of the bearing and you should have grease applied to all parts of the bearing that need grease.
Replenish the grease as required during all stages of the above process.
Interesting technique, thanks for the advice.
Yes, the old bearing grease packing method.
keren mas bro videonya bening dan tutorialnya mudah difahami, thanks share ilmunya ...🥰
Thank you for your comment! 😄
if you liked this video,
share this video with your friends ❤️
it will help the development of the channel! 📈
Great Job bro! Great pro service!
glad to be of service! thanks for your feedback 😘
Good video on how to repair the new BB's. Thanks!
glad to be of service! thanks for your feedback 😘
I love the BB puller tools😍
thank you for your comment!
To all the people who say just replace bearings i live in NZ cant get bearings alone have to replace whole crank set $1200 i think ill clean mine out !
Thank you for your comment! ❤️❤️❤️
Find a good bike shop
Hola, me gustan muchos tus videos, siempre aprendo mucho de ellos. Me gustaría saber donde se consigue la pieza para desmontar las balinesas que mostraste en el video
¡Estamos encantados de ser de utilidad! Gracias por sus comentarios! 😘 Las herramientas especializadas siempre se pueden encontrar en mercados online o clasificados
Very nice and detailed video ! I love the camera ! I open the BB to clean it and i found that is pressHand (it comes off with the chainrings) ! Its a new type? Lol i dont need that BB tools anymore :D
i like the way you "explain / show " this ... got a question, how do you see the difference between a dirty bearing of one thats been worn out ?
Let's just say that if the bearing is dirty, it is definitely already worn.)
In fact, it should be replaced with a new one.
but the theme of the video is that the bearing can still work for a while if it is well maintained).
If it's dirty it's not already worn. It's work when it feels rough when spinning.
Great job brother
glad to be of service! thanks for your feedback 😘
🇧🇷 Fazer manutenção na bike é muito importante para durabilidade dos componentes, like merecido tmj assistindo aqui em São Paulo Brasil
Obrigado pelo seu comentário! ❤️❤️❤️
Partilha este vídeo com os teus amigos,
isso ajudará no desenvolvimento do canal! 📈😘
@@GoodBicycle Ok 👍🏾
Vou compartilhar sim
Bearings with rust do always have small damage, dents, and play. New ones are widely available. But if you have an old bike, you could do this. I would not recommend.
Thank you for your feedback! 😘
I've always used brake cleaner on something like that, the cleaner will do a great job at cleaning and evaporates quite quickly.
Thank you for your advice. I really don't like the acetone smell of brake cleaner
Wow I didin't even know you could take these things apart! Nice trick at 3.15 using crankset! I haven't got any of the other tools to do the job though.
glad to be of service! thanks for your feedback 😘
Just add a small piece of pipe to that threaded rod & you won't have to wind the nut all the way down. Great video. You are very meticulous!
Thank you for your comment! ❤️❤️❤️
Share this video with your friends,
it will help the development of the channel! 📈😘
I tap the bearings out with a screwdriver, i don't have that special tool. Nice video.
Thank you for your comment! ❤️❤️❤️
Share this video with your friends,
it will help the development of the channel! 📈😘
im pretty sure you are destroying bearing life by tapping it out like that
@@wagwanyute I replace with new bearings and press them back into the housing.
Está muy bueno el vídeo pero me gustaría saber que ingredientes usa para limpiar los rodamientos. El nombre de cada líquido que usa por ejemplo alcohol o algo así por el estilo. Por qué en cada país tienen nombre diferente. Saludos desde Cúcuta Colombia 🇨🇴🚲👍 Ya tienes un suscriptor más 👍
Gracias por sus comentarios. Efectivamente, hay algunos problemas con la disponibilidad y las traducciones de distintos componentes en diferentes países. Utilizamos combustible de camping para limpiar componentes muy sucios y grasientos. Para desengrasar (en el vídeo, una lata con pulverizador), utilizamos isopropanol.
Muchas gracias por el dato sigue adelante con sus buenos videos. Muchas gracias y muchas bendiciones Bro 🙏🤗🚴🇨🇴🚲
Not necessary to release the bearing outside. Just remove one rubber. Put all the area in a fluid to clean. Shake it to release the dirt. Dry it and lubricate it. Easy!
Alternative buy 2 new bearing for 3-4 dollars and change.
Thank you for your feedback! 😘
My new BMX race bike uses this type of bottom bracket. Bearings got swapped out immediately for ceramic units 😁
👍
Donde podría conseguir ese extractor se los baleros? Me pareció muy eficaz.
Prueba a buscar en grandes tiendas de bicicletas online o en mercados chinos
Excellent video!! Thank you; where do I get the tool to pull the bearing out please??? TIA!!
Glad to be of service! Thank you for your feedback! 😘 Specialized tools can always be found on online marketplaces and stores.
What grease are you using, please? TIA! What is the brand name of the bearing puller tool you use, please?
Perfect service
Thank you for your comment! 😍
Gutes Video! Aber irgendwann sind die Lager so eingelaufen das billiger ist einen neuen Satz, anstatt das Werkzeug zum ausbauen dafür zu kaufen😁
Vielen Dank für Ihr Feedback! 😘
Appreciate the process and i felt ita therapeutic in someway. Would love to do this on my bike with the proper tolols.. I wish to know what is the tool called for removing the bearing or a similar product link?
tool - is DIY
Thank you for your comment! 😍
if you liked this video,
share this video with your friends ❤️
it will help the development of the channel! 📈
This is why I prefer square taper spindles with serviceable cups. They spin a LOT better.
Thank you for your feedback! 😘
how are they serviceable? Can you name suck models?
Me gustó es truco de el tubo de llanta para proteger el pedal . En mi país ecuador no encuentro el extractor de rodamientos de pedalier😊
¡Gracias por tu comentario! 😍
si te ha gustado este video
comparte este video con tus amigos ❤️
¡ayudará al desarrollo del canal! 📈
I have a brilliant idea! Just change to new ones! 😀😀😀 Better faster and the proper way to do it!
thanks for the advice 😘
Fantastico lavoro bravo.Che prodotto usi per pulire i cuscinetti e le calotte del movimento di centro?
detergente per il lavaggio di motori a combustione interna
se ti è piaciuto questo video,
condividi questo video con i tuoi amici ❤️
aiuterà lo sviluppo del canale! 📈
@@GoodBicycle perfetto grazie mille,sarebbe petrolio bianco o sbaglio? Condividerò di sicuro
Nice.... the fact that they can be dismantled means they can be repaired and reused. I do repairs but will hv a new one on hand in case the repaired doesn't last. 🎉
Thank you for your comment. It's more complicated than a complete replacement, but cheaper and more environmentally friendly 😊
Aweson Video, well film and in great detail.
Thank you for your feedback! 😘
Bien video, pero ya que retiras la balinera, seria mejor colocar una nueva, no es necesario retirarla para realizar la limpieza y engrase, deberías también fomentar el uso de protección de las manos, como guantes de nitrilo o látex.
Me resulta muy difícil trabajar con guantes
@@GoodBicycle los químicos te pueden afectar la piel. Usa unos quirúrgicos que te queden justos y le aplicas talco internamente para que sean fácil de colocar.
Could you provide an itemized list of products/tools you’re using for this process?
It's a bit stressful, maybe we'll add subtitles later
Nice trick on that bearing cap removal hahaha!
glad to be of service! thanks for your feedback 😘
Nice vid! Is the bearing pulling/pressing tool self-made?
Thank you for your comment. The instrument is almost handmade, we bought it from a local craftsman
Très bonne vidéo sur l'entretien des roulements BSA, je pratique ainsi depuis des années sur mes VTT. Par contre les roulements dans votre vidéos ont trop subi de corrosion pour être rattrapés. Les billes sont corrodées et leur état de surface a été endommagé à jamais, elles ne seront plus jamais aussi lisses que des billes neuves même après un nettoyage / regraissage, et le roulement ne sera plus jamais aussi fluide qu'un neuf en charge. Vu le prix d'un roulement acier neuf, le plus simple est de changer les roulements par des neufs pour retrouver une vraie fluidité.
Mais sinon merci pour votre vidéo très bien réalisée.
Merci pour votre commentaire ! 😍
si vous avez aimé cette vidéo,
partagez cette vidéo avec vos amis ❤️
cela aidera au développement de la chaîne ! 📈
Bardzo dobra instrukcja. Bez zbędnego pierdolenia.!!!
Dziękuję za komentarz! 😍
jeśli podobał Ci się ten film,
udostępnij ten film swoim znajomym ❤️
pomoże to w rozwoju kanału! 📈
what tool is this for remove barings from bottom bracket bowl ?
This is a handmade tool, you can find something similar in online bike shops on request Bottom Bracket Bearing Removal Tool
@@GoodBicycle thanks 😊
Hallo,
leidet das Kugellager nicht durch den axialen Druck vom inneren Ring beim Auspressen?
Welches Fett verwendest Du bei den Lagern? Super Videos!
Hallo! Das Lager wird nicht beschädigt sein, aber es ist besser, es durch ein neues zu ersetzen
the internal working of the bb looked well greased anyway, didnt need that much dissection
Thank you for your feedback! 😘
If the bearing is pressed out only by the inner ring, it is destroyed. Then it makes no sense to clean and lubricate it, it is better to put a new one. As you can see in the video, the new one is pressed behind the outer ring and that's right.
Thank you for the clarification 👍
@8:20 What is the liquid in the syringe? Same question @10:40.
gasoline
@@GoodBicycle Regular or premium 😂
purified "Kalosha"
Could you please mention, what exact grease you used to relubricate. cant find good grease for bearings here
For lube, we use thick calcium grease Divinol
베어링 씻어봤는데...잘 안 씻기고 오히려 더 뻑뻑해지는 느낌도 있고 .. 그냥 새베어링으로 바꾸는 것이 비용 시간 적인 면에서 훨씬 좋을 것 같습니다.
물론 대충 그냥 타는 자전거라면 대충 씻어주고 대충 그리스 바르면 되겠지만 완벽해지길 원하면 그냥 새것으로 교환이 좋아요.
예, 베어링이나 전체 버텀 브래킷을 교체하는 것이 정말 쉽지만 이러한 부품이 항상 가까이에 있는 것은 아닙니다😊.
Ciao dove posso acquistare lo strumento per rimuovere i cuscinetti!? grazie
Cercate un attrezzo con il nome “Strumento per la rimozione del cuscinetto del movimento centrale”
very good job! je souscris!
glad to be of service! thanks for your feedback 😘
Very good!😊
thank you for your comment!
Share my videos with your friends, it will help the development of the channel! 😘
Cześć! Mógłbyś tylko zdradzić jakiego używasz smaru, albo chociaż jaki powinienem kupić właśnie do takich łożysk?
W przypadku łożysk używamy Divinol Fett Top, ale można użyć dowolnego analogu na bazie wapnia
A mi me gustarua saber cuanto cuenta este mantenimeinto .? Saludos
Hola. En nuestro país, este tipo de trabajo cuesta 6-10 euros, pero el desmantelamiento se cobra por separado
Were you can get the bearing remove tool or is it diy?
diy )
sangat menarik, saya suka video anda 😃
Terima kasih atas tanggapan Anda! 😘
Kotek jest cudowny! ❤️😼❤️
Dziękuję za komentarz! 😍
jeśli podobał Ci się ten film,
udostępnij ten film swoim znajomym ❤️
pomoże to w rozwoju kanału! 📈
Hola ..No se puede hacer girar el rodamiento en seco, se raya la pista..La grasa va limpiando la pista para q las boliyas corran bien sobre la pista.. cuando hace ruido el rodamiento no sirve mas.. no tiene arreglo..
Lo hice mejor de lo que era )
Good work 👏
Thank you for your comment! ❤️❤️❤️
Share this video with your friends,
it will help the development of the channel! 📈😘
Perfect job!
Thank you for your comment! 😍
if you liked this video,
share this video with your friends ❤️
it will help the development of the channel! 📈
Hola me ayudas tengo holotech no me gusta , rodamientos en constante mantenimiento.
Tu crees que es mejor el antiguo mecanismo?
Yo pienso que si
Hola. Si el pedalier es de Shimano, entonces el sistema hollowtech y el cuadrado serán más o menos de la misma calidad. Los ejes de pedalier hollowtech chinos serán de peor calidad que los cuadrados, pero depende de tu suerte
멋진 정비 영상입니다.
✊😘❤️
Well done 👍
glad to be of service! thanks for your feedback 😘
Where can I get this bearing removal tool from?
This is a handmade tool, you can find something similar in online bike shops on request Bottom Bracket Bearing Removal Tool
what green gel or frease are you using please
If you are referring to a grease, it is
thick calcium grease Divinol
Onde compro essa ferramenta para tirar o rolamento?
Infelizmente, não posso dizer-vos. É uma ferramenta que temos na nossa oficina há vários anos. Tente pesquisar por "ferramenta de prensagem de rolamentos Hollowtech II
Super, as always :)
🤓💁❤️
list of materials used on this video, please, for easy purchase on our local hardware, thanks
was that a question?
@@GoodBicycle yes, please, thanks
What type of bearing grease is it?
calcium-based grease
@@GoodBicycle: Marine grease, being used on boats and boat trailers, is better. The reason why is because marine grease repels water, which cuts down on corrosion.
He knows what he's doing but......just go and buy a new bottom bracket they aren't that expensive, plus there will be wear on those bearings anyway.
thank you for your comment! 😘
The crankarm is prowheel, The manufacturer of SRAM.
possibly
Where can I buy this tool to extract bearings?
Try searching in large online bike shops or on Chinese marketplaces
Or you can replace that sealed cartridge that comes with new bearings for only $20. One side is L.H. thread, other is R.H. thread, that state "Do Not Disassemble".
is also a good option😇
where to buy that tool and what it's called?
It's a handmade instrument, bought from a local craftsman. Analogues can be found by requesting Bottom Bracket Bearing Removal Tool
Hai smontato il movimento centrale per pulire i cuscinetti due cuscinetti sigillati nuovi costano circa 25 euro non facevi prima cosi ? E' sei anche piu' sicuro?
è per l'anima e per la conservazione della natura))))))
La prossima volta prova a piantare anche qualche albero per la conservazione della natura
Teraz lepsze niż z fabryki😉
hmmm)))) oczywiście, że jest lepiej!!!)))))
속이 다 후련해 지내요. 영상미도 있구요.
💆😘
what is the brand of this grease ? thank you
Thank you for your comment! 😘 Divinol Fett Top 2003
Where can I get the bearing puller tools?
You need to look for tools for workshops in online stores, as you are unlikely to find them in ordinary bike shops
@@GoodBicycle can you provide some link?
What grease do you use mate?
For lube, we use thick calcium grease Divinol
Oh , where you get those tools .
These tools were gradually accumulated over the years of the workshop's work😊
what is the green grease
Divinol Fett Top 2003
Did you use alcohol for removing the rust?
including
Basically an informative video, but i wouldn`t recommend removing a bearing by applying pressure to the inner ring (at least if your intention is to reuse the bearing), cause this loads the balls of the bearing in a way the bearing is not designed for. Always remove a bearing by applying pressure to the outer ring that attaches to the fit of the bearing
thanks for your feedback 😘
Muita graxa amigo
obrigado pelo conselho! 😘
Where to order the tool my friend??
This is a handmade tool, you can find something similar in online bike shops on request Bottom Bracket Bearing Removal Tool
@@GoodBicycle thank you sir
7:33 just spin it in solvent. way faster and better.
Thank you for your feedback! 😘
Retirando de esa forma el sello, aplicas demasiada fuerza, retiralo con una pequeña aguja o pinza de electrónica redonda plana, no se dañan los labios de esta manera.
¡gracias por el consejo ! 😘
Super film!
THX xD :)))
glad to be of service! thanks for your feedback 😘