HEMI TICK? NO... Its an Exhaust Leak. PERMANENT FIX?
Вставка
- Опубліковано 29 вер 2024
- This is fun, high quality video, on the 5 items I used with my BBK Shorty Tuned-Length Exhaust Header to achieve the elusive PERMANENT FIX for hemi 5.7 tick knock Exhaust Leak.
THANKS FOR WATCHING!!!
DO NOT CLICK THIS!!! / bigdaddyshouse
I just started Instagram if you guys want to check it out....
www.instagram....
Some of my links are Amazon affiliate links. Thank you for your support!
BBK (4014) 1-5/8" Chrome Shorty Tuned-Length Exhaust Header for Dodge Truck
amzn.to/3lDQUag
Stage 8 - 8916 MOPAR 4.7, 5.7, 6.1 Liter Hemi V8 Header Bolt Kit
amzn.to/3jZOvX2
Fel-Pro MS 97083 Exhaust Manifold Gasket Set
amzn.to/2H2GrGF
hHiwowsport 2'' x 50' Lava Titanium Exhaust Wrap Heat Shield
amzn.to/3iTcZjr
SunplusTrade 100pcs 11.8 Inches Stainless Steel Exhaust Wrap Multi-Purpose Locking Cable Metal Zip Ties
amzn.to/3iU7Fwf
Design Engineering 010220 Locking Tie Tool
amzn.to/2Ip7Ym9
RAM FORUM AlfaOBD thread:
www.ramforum.c....
In today's world this has to be said.......
Disclaimer: Due to factors beyond the control of "I" or big daddy's house, I cannot guarantee against improper use or unauthorized modifications of this information. "I" big daddy's house assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. "I" big daddy's house recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not "I" big daddy's house. This video is for entertainment purposes only.
~-~~-~~~-~~-~ You may also like: "Tesla Style Radio 1 Year review" www.youtube.co.... ~-~~-~~~-~~-~
hemi tick
hemi tick on startup
hemi engine
hemi engine sound
hemi 5.7 engine sound
hemi tick fix
hemi tick ram 1500
hemi tick cold start
Exhaust Leak
Nice info, could i get the link for short header, bolts, strap and wrap please. Thank you appreciated.
Hey Elmerando, I have all the links in my description but to keep things simple for anybody who wants to take a look at these products, I'll pin it here in the comments.
BBK (4014) 1-5/8" Chrome Shorty Tuned-Length Exhaust Header for Dodge Truck
amzn.to/3lDQUag
Stage 8 - 8916 MOPAR 4.7, 5.7, 6.1 Liter Hemi V8 Header Bolt Kit
amzn.to/3jZOvX2
Fel-Pro MS 97083 Exhaust Manifold Gasket Set
amzn.to/2H2GrGF
hHiwowsport 2'' x 50' Lava Titanium Exhaust Wrap Heat Shield
amzn.to/3iTcZjr
SunplusTrade 100pcs 11.8 Inches Stainless Steel Exhaust Wrap Multi-Purpose Locking Cable Metal Zip Ties
amzn.to/3iU7Fwf
Design Engineering 010220 Locking Tie Tool
amzn.to/2Ip7Ym9
@@bigdaddyshouse hey Bud thank you so much for the reply and info appreciated, i will try to my 2012 Dodge Ram 1500 5,7 Hemi with ticking noice, more power to you Big Daddy.
Dude, I'm watching this video 3 years from when it was uploaded. I appreciate the effort you put in for cool edits and overlays for the video. I'm currently fixing the exhaust manifold bolts that sheared off in my block, and was going through videos for some type of guidance. This helped, I'm still going to use stock everything, but atleast I now know there is an alternative that might prevent future problems. Subscribed.
My 2019 Ram cracked both manifolds almost in half after a high speed cross country run. I replaced them with stainless steel JBA shortys and now have approximately 8000 miles of trouble free driving. Don’t listen to BS about shortys being a waste of money. I got noticeable performance gains across the RPM range. Sure long tubes would have got more but I didn’t require a tune so I’m very pleased with the results.
Get a set of well "seasoned" (high mileage) manifolds and get them planed flat at a machine shop-reinstall with new hardware and high quality gaskets and voila! Problem solved and way cheaper and way easier than headers! The headers are a Beeatch to install and your trucks not going to magically turn into a race truck with the headers anyway!
The answer to my problems my 2008 dodge 1500 Laramie has started to do this was gonna get a new manifold and a new dual exhaust
That's the ticket. Glad I can help man!
Will this cause a Loss in Power??
Do you have a link to some good bolts just to replace it on a stock manifold? I don’t have any after market headers just stock
Hey Master Roaster, I would have gone with OEM if I was just going to repair it.
parts.allmoparparts.com/v-2016-ram-1500--express--5-7l-v8-gas/5-7l-hemi-gas-engine--manifolds-and-vacuum-fittings
Hope this helps brother!
Thanks for watching and your support.
@@bigdaddyshouse have you ever done a review on the Dorman bolts?
Try Dorman and put blue medium grade locktite
Does the tick speed up while accelerating if it’s an exhaust leak?
Yes
What did it cost you for the labor and engine I got my dream truck and the thing is tapping I fixed the bolts and still tapping
Hey Tyson, if you have a seized up roller you can get it fixed for probably around 3 grand.
I want a different route because I had 100,000 miles on my engine and I wanted it to last for a long while.
I opted with putting a rebuilt Jasper engine inside of it.
My truck was out of warranty so this was the route I took and here's my breakdown brother.
5.7 hemi Jasper engine $4,685
Engine install kit $380
MDS solenoids $366
Anti-freeze coolant $51
Oil filter, oil change $28
labor $1,050
Total $6,976
Hope this helps any future decisions brother.
Thanks for watching and your support!
Great video. What are your thoughts on the Percy’s vibe lock header bolts. They still lock well and don’t have the PITA tear drop clips like the stage 8’s.
Hey Nathan, I've never used Percy's. Have you?
If so how do you feel they held up?
And thanks for the compliment brother. I spend countless hours making these videos.
For the header wrap, I used small hose clamps to hold it in place on my Harley. Been a couple years and still holding fine.
Hey Monroe, I can see how that would work well for a Harley but for the twisted tubes of a shorty header you definitely need to use the clamps I did.
I appreciate your support brother!
How much was the Jasper engine?
Hey J. Mark, installed it was about $6,500 😢
Why did you go with Stage 8 over ARP?
To be honest with you, I didn't do any research on ARP.
Would you recommend it over sage 8? And if so why?
thanks 💪🏼 new subscriber
Thanks for your support Smu57
Any cel since switching to shorties?
Only after I had my engine replaced. I found out the shop used the same gaskets I had put on when I did the install. Not happy about that.
Anyway, I have an exhaust leak again and need to dig into it and see if the gasket is the problem or something else.
Thanks for watching man.
I was told the shorty headers won't last, weren't made for an everyday driver.Plane the manifold and add new bolts.Thoughts?
Now install some headers and you'll have that nice CHOP CHOP noise Lol
$$$$$$ money baby!
@@bigdaddyshouse keep making video they'll come..
Lol great video edit man
Entertaining
Thank you Charles.
I spend endless hours putting these together.
I'm glad you enjoyed it.
I have a 17 and it only has 30k miles and it already ticks any suggestions? I want to stay stock
Hey, The Truth, assuming it is just an exhaust leak what I was describing in this video, just replace the broken bolts.
if you do not want to do it yourself it will probably only cost a couple hundred dollars at any shop. If it's under warranty then no worries.
I appreciate you watching my video and thank you for support.
So I just got my 2014 Ram and Noticed it has the tick but after it runs for a few minutes it stops when it cools down and I start it back up it does it until it warms back up. got any Suggestions? Love your channel thanks
Thanks brother! Glad to have you aboard.
So what you are describing sounds like a tall tale exhaust leak.
First thing I would do is inspect your exhaust manifold and make sure none of the bolts have been shared off.
It is super common for these HEMIs.
To fix it you'll have to remove the exhaust manifold and then extract the bowl and put a new one in.
It's a real inexpensive fix if you do it yourself. If you have a shop dude it'll probably be a few hundred bucks.
Thanks for watching the channel and I appreciate your support.
At what point does the tick normally start happening? I recently got a 2017 ram with only 15k miles on it. My last truck, 05 Silverado had this same issue, and I hoping to fix this before these bolts become a problem.
Hey brother, according to people in the RAM forum this has happened at all at various mileage. If I remember correctly even as early as 10,000 mi. I remember some people saying they've had it happen at 20 40 and 60,000 mi.
For me personally it happened at 90,000 mi.
This will be a great question to ask in the RAM forum and see what kind of response you get from everybody in there.
www.ramforum.com/forums/general-discussions.38/
if you're not signed up, sign up ask the question in there and then tag me in it so I can see all the responses too.
My handle is big Daddy's house in the Rams forum also.
Thanks for taking time on your day to watch my video, I appreciate it.
See you in the forum brother!
@@bigdaddyshouse thanks man, you do some great videos btw
Thanks for the compliment man, I put a ton of hours into them.
I'm glad you're enjoying them.
Thank you from KSA.
Thank you for watching sir!
Iya kang mantep , sukses terus
matur nuwun dhukungan
Great video, I never thought about wrapping mine before your video. I installed the BBK headers and Grade 8 in the Spring of 2019, but I couldn't get half of the locking tabs 2 fit, due to the bolts' close proximity to the pipes. Can you post a video clip of them installed, so your viewers can have a better visual on how to align the tabs so they fit without cutting them?
Hey James, hope everything is well with you.
I decided to wrap my headers because I've read and seen too many horror stories of melted wires and hoses. These things get crazy hot!
Have you come across any problems in your engine compartment yet?
So with the way these tubesare snaked around It is almost inevitable you're going to have to cut or grind to get all the tabs to fit.
Unfortunately yesterday I just got some bad news about my headers. I was told the driver side was cracked right by the weld where they all meet together.
I'm probably going to hoist this thing up today or tomorrow to double-check it for myself.
So good news for you guys if it is indeed cracked because I'll have to replace it and of course I will do a video on that.
Any updates? Is the header cracked?
Hey Stuart, I haven't even had a chance to check yet. I got into a horrific accident on my electric skateboard and been down for about 2 months. But I'm ready to get back at it now. I'll definitely do a video on it.
How did those bbk headers hold up?
Mine cracked . Spend about double the money on something better.
Same here. I'm in the middle of making a video about it....
So did you fix it? Im having the same problem with my 6.1
Men I love this video hilarious but very informative 👍
Shorty link is broken.
YAY I'm the 10th viewer!!!!
Your number one of my books though Gill!
Noted.
How are they doing ?
Hey Raul, they're definitely leaking now. I looked at the stage 8 bolts and it seemed to be intact. So my best guess is the flange is warped or I got a crack in it.
Pretty soon here I'm going to dig into it and see.
I'll make a video about it.
Thanks for watching brother!
Thanks for the info ! My bolt just snapped and was thinking of getting these! Good luck !
Thanks for watching Raul.
Hope everything works out good for you.
keep it
Sorry BaitBook 101, I already shaved it :(
Thanks for watching and your support though!
@@bigdaddyshouse grow it again! lol
Hahahaha! I'll be sure and take my vitamins and give it the old college go!
Did any of the bolts break after the switch to the shorty headers and bolts?
Hey Kero96, I have had a problem since they install but I cannot tell you definitely what actually went wrong yet. I am going to dig into it pretty soon to find out what is causing my new exhaust leak.
Stay tuned.
Thanks for watching and your support!