How To Change The Engine Oil And Oil Filter On Your Vintage Honda CB550 And CB500K

Поділитися
Вставка
  • Опубліковано 6 лип 2024
  • This may seem remedial, but everyone has to start somewhere in their wrenching knowledge. Learning how to change the oil and oil filter is the first thing to learn when getting into the vintage motorcycle world. It is also the first step in what we call the standard tune-up procedures for your vintage Honda CB500k, CB550, CB550F, and even other vintage Honda 4 cylinder motorcycles like the CB350F, CB400F, and CB750. The standard tune-up procedure is a regiment of maintenance every 1,500 m (2,400 km) that includes changing the engine oil, tightening the cam chain, setting valve (tappet) clearances, and setting your ignition timing. Every other oil change, or every 3,000 m ( 5,000 km), the oil filter needs to be changed as well. If it is your very first oil change since getting your motorcycle, drop the oil pan and give that and the oil pickup screen a good cleaning. Over here at Common Motor, we consider these skills essential knowledge to owning one of these motorcycles. Check out the links below to learn how you can do these at home.
    Parts you might need for changing the oil and oil filter:
    CB500K / CB550 Oil Filter Housing Replacement Bolt: www.common-motor.com/honda-cb...
    CB500K / CB550 Oil Filter: www.common-motor.com/honda-oi...
    How to perform your other standard tune-up procedures:
    Cam Chain & Valve Adjustment: support.common-motor.com/hc/e...
    Ignition Timing: support.common-motor.com/hc/e...
    Contents of this video:
    00:00 - Intro
    00:09 - How often do I change the oil?
    00:30 - Tools list
    00:44 - Removing the drain plug and draining the oil
    01:08 - Inspecting your oil
    01:23 - Removing the oil filter
    01:49 - Kicking over the engine
    02:00 - Replacing the oil filter bolt o-ring
    02:28 - Replacement parts available
    02:42 - installing the new oil filter
    03:23 - Reinstalling the drain plug
    03:44 - How much oil and what kind?
    04:09 - Zinc additive
    04:22 - How to check the oil level
    04:49 - Outro
  • Авто та транспорт

КОМЕНТАРІ • 13

  • @romeparrilla8307
    @romeparrilla8307 Місяць тому +1

    thank you for this awesome video,i learned something today,i was just wondering why some motorist are using syntetic oil?

  • @bradkorando
    @bradkorando 2 роки тому +2

    Well presented - thanks for the video!

  • @lemoncarrot7068
    @lemoncarrot7068 2 роки тому

    praise common motor

  • @jackyyeung7903
    @jackyyeung7903 2 місяці тому

    Watched this after my cb500 oil change yesterday. I forgot the oil spring washer 😔

  • @MarkJames61
    @MarkJames61 2 роки тому

    Cb500/550 yeah!

  • @romeparrilla8307
    @romeparrilla8307 Місяць тому

    thanks for the video,does your cb 500 have only one key for ignition gas cap and seat?because i just bought a barn find 1976 honda cb400f and it does not have a key to it,thank you

  • @winhtetaung4575
    @winhtetaung4575 2 роки тому

    Hello sir please post about CB550 Crankshaft bearing shell number and how to set up

    • @Common-motor
      @Common-motor  2 роки тому

      Thats a bit too specifc for a video for us to make. You can always write in to our customer service over at common-motor.com

  • @robbyashe6969
    @robbyashe6969 2 роки тому +1

    ill loan you my 75 cb550 to make more videos if you tune it up

  • @gordwoods7775
    @gordwoods7775 2 роки тому

    zink oil additive?? where do you get that??

  • @MiiikeeeHuuunt
    @MiiikeeeHuuunt 2 роки тому

    You mentioned dropping the oil pan, but didn't show it. Another video perhaps?

    • @Common-motor
      @Common-motor  2 роки тому +1

      Yes we don't go over that here but I do clean out a CB550 oil pan in this video: ua-cam.com/video/mtSeMp7kQRs/v-deo.html