Unboxing the HTVRONT Auto Heat Press and using DTF Transfers
Вставка
- Опубліковано 6 сер 2024
- In this video, we will be unboxing and checking out a fairly reviewed heat press that we found on Amazon.com. We are testing heat presses under $300 to discuss the pros and cons of each one. Make sure you subscribe and also follow along for the wash test that we are doing in the heat press comparison video dropping later this month.
This video will cover:
✅ HTVRont Auto Heat Press
✅ PROS and CONS of the HTVRONT Heat Press
✅ Pressure Test
✅ Heat temperature test
✅ Applying DTF Transfers with the HTVRONT
💻⚡️Order Custom DTF Heat Transfers transfersuperstars.com/order
💻⚡️Order a FREE Tester Pack transfersuperstars.com/tester
► LINKS MENTIONED
⬇️ More stuff you should check out
Premium Heat Press Pillows amzn.to/3WqmawM OR amzn.to/3gioPbb
Tape Dispenser amzn.to/3vKOVZj
Heat Tape amzn.to/3Ss7QC3
Infrared Temperature Gun amzn.to/3hJ94uG
Most Affordable 15" x 15" Heat Press on Amazon for $190 amzn.to/3h2trTa
[COMPLETE LIST] DTF Heat Transfer Pressing Supplies on Amazon amzn.to/3TUrZQT
Heat Press Recommendations (BUDGET)
PowerPress 15x15 on Amazon amzn.to/3SPWFWj
Geo Knight Digital Knight 16" x 20" Clam Auto-Open Heat Press shrsl.com/49tsz
Hatpress By Stahls' Hotronix 360 IQ Hat Press
shrsl.com/49tt3
► SOCIAL MEDIA
Instagram: / transfersuperstars
TikTok: / transfersuperstars
UA-cam: / transfersuperstars
Facebook: / transfersuperstars
Linktree: linktr.ee/transfersuperstars
► DTFPRO DTF Printer Supplies
Film dtgpro.com/cicproduct/dtf-pro...
Inks dtgpro.com/cicproduct/dtf-pro...
Adhesive Powder dtgpro.com/cicproduct/dtg-pro...
Printhead Cleaning Solution dtgpro.com/cicproduct/dtg-cle...
Printhead Cleaning Solution (Strong) dtgpro.com/cicproduct/dtg-xtr...
Foam Swabs dtgpro.com/cicproduct/dtgpro-...
Syringes dtgpro.com/cicproduct/dtg-ink...
► CUSTOMER REVIEWS
Google g.page/r/CTcIkuv_pMlKEAI/review
Yelp www.yelp.com/biz/transfer-sup...
Disclaimer: By making a purchase through any of our affiliate links, we receive a very small commission at no extra cost to you. This helps us on our mission to provide quality education to you.
#dtfprinting #dtfprinter #directtofilm #dtftransfers #dtflosangeles #transfersuperstars #dtfprint #dtf #dtffilmprinter #dtftshirtprinting #dtfmachine #dtfprinters #dtftransferprinting #dtftransfer #dtfprintertshirt #dtfmachineprinter - Навчання та стиль
Nice unboxing!I bought one and it does great work
Thanks!
Great video I am just wondering which process i can do with this heat press 🙈 since i am only doing dtf and apparently is not perfect
This heatpress will work on bags, canopy, and koozies. If you do promotional shirts that are one time wear or don't need to last along time, you might be able to get away with it. Other than that, it just doesn't have enough pressure for long lasting durability.
Great! While I'm watching I'm typing. I bought this recently but it doesn't do dtf transfers on hoodies properly for me 🤦🏾♀️
Its a bit tight because this machine doesn't have good clearance. Did you try to place the hoodie sideways?
We loved this press when we first received it in January 2023. We only use it moderately (less than 6 items pressed per use per month). Now it is August 2023 and it will not close. It heats up perfectly but when we try to press it closes and pops right back open and the controls start blinking. It has also started making a grinding noise. I contacted warranty support as the press is under warranty, they responded requesting videos of the problems, we emailed videos back, they responded with they couldn't open the videos (they are too stupid to download them and use a player to view them), we uploaded the videos to our you tube channel (cause everyone has one of those) and sent them the links....There response was to give them significant time to troubleshoot the problem and they would get back to me. I’m sure enough time for my warranty to expire. I asked them point blank to honor their warranty and replace the press…Crickets!!!! Others here have complained about these same issues in the reviews. THEY WILL NOT HONOR THEIR WARRANTY!!! I'll update this review if something changes.
I'm sorry to hear about your experiences so far! That is not good customer service. Please keep us posted on what they end up doing, they should honor the warranty! Our only complaint so far with this press is the pressure wasn't enough for good DTF Presses. It will stick but overtime the transfers did not have enough pressure.
Have you tried using a thick silicone heat pad to increase pressure instead of the pad the press came with? I'm only asking cuz I'm looking to get that heat press myself for small events and was wondering if this would work
Yes, I've added up to 2 layers of heat press silicone pad. It helps but I'm still not seeing the press lines afterwards. I really tried to make this one work but it just lacks the ability to adjust the pressure.
@@transfersuperstars thank you for the update
Hello Friend, why do some printers comment that this plate does not have enough pressure to adhere DTF or textile vinyl? what do you think? Is the pressure of the iron enough to adhere these materials and not come off when washed? I need to buy an iron of that type. Thank you Greetings from MX.
It won't come off but if you don't use enough pressure, it prematurely wrinkles after some washes. Here's a video ua-cam.com/video/oyj0As0Bz6Q/v-deo.html
Please try a hoodie with that machine next
We’ve put this machine away for now. It lacks pressure and we haven’t been able to find a way to really increase it.
Does anyone know how to clean the heat plate? I accidentally used the wrong material and some got melted on there.
Try alcohol. What did you get melted on the other side?
That's one thing I didn't like about this design, and looks like the platen could come out a bit farther
What is thr clearance without the pad
We don't have the press anymore. It's about 2-3". Not a lot of clearance.
@@transfersuperstars ok thank you
That meter isn't extremely accurate on reflective metal surfaces. Especially if that's not a reputable brand meter.
its not 100% accurate but will give a general idea of the heat ranges. The main issue we saw with this press is the pressure wasn't enough.