I have had my HTVRONT Heat Press since September, and I haven't used it yet. I have been very nervous to use it, and this will be my first time EVER using a heat press machine. I have watched so many videos, until I'm BLUE it the face🤣🤣🤣! But I ran a cross your video today, and I am GLAD I did! You are the ONLY one that I have seen, really explain how to use the machine well😊. You have empowered me to FINALLY use my machine.Thank you so much for the FABULOUS tutorial❤!
I'm just getting this machine. I was like you, watched so many videos until I fell asleep. I was nervous to use it and peel the film off. I did my first dtf today, and it looks good. I'm a little disappointed knowing they have a new one day after I purchase this one.....ohh well, I will try the tumbler one next. Do you plan on purchasing the new one?
I got mine yesterday! Thank you so much for your video.i was a little nervous to use it for the first time,but your straight forward video,and explanation of the buttons,made it easy!!!😊
I have had my HTVRont Auto Heat Press since September 2022 having done the Kickstarter. I JUST tried it TODAY, March 2023. Thanks for your video in helping me just do it!
I thought about getting this one because of the cost but I don’t like how close my hand would get to the heated iron part. I prefer a auto clamshell press that opens up wider. Great video though!
Courtney, thank you for your review. I received mine a few days ago and have one question. On the left side of the panel is the power button. Mine does not go off. I waited 10 minutes but didn't go off so unplugged for safety. Is this the only way???Thank you, Paris. I love this heat press
That light stays on as long as it's plugged in. I don't like that so I plugged my machine into a surge protector. The switch on the surge protector allows me to flip it on & off every time I use my machine.
I have been looking at this for weeks and wondering how well it works. Thank you for reviewing it on your channel! I have a Cricut Easy Press, but this would be so much easier to use! Also wanted to share that because of you, I recently purchased a turner from Bama Cups. Can’t wait to receive my new turner!
I sub wood and ceramic blanks, if you place anything over the sub paper that is over the blank the design will not fully transfer to the blank, I am guessing the pressure is not enough.
I love my HTVRont auto press, BUT I’m having a real issue with my bleached sub shirts (gildan softstyle heathers) getting scorched. 385 for 60 seconds and the entire 15x15 platen-covered area of the shirt goes from white to light brown. I’ve checked the temp with a digital laser thermometer and it tracks with the 385 setting. Anyway, I just wondered if you’ve encountered this at all since getting your auto press because I know you sub on a lot of bleached shirts… I’ve tried the hydrogen peroxide trick, but that didn’t help… 🙄🤣 Great demo video!!!
@@CourtneysCustoms thanks!! I tried dropping the temp about 10 degrees and the graphic looked washed out. I feel like there must be a sweet spot, but I’m really struggling to find it. I was concerned that this press used too much pressure - the one thing that can’t be adjusted. But I seem to be the only person having this issue 🙄🤣 I’ll keep experimenting
this is a known issue when working with bleach. Some spray it with peroxide after wards and say that helps. Others do the bleaching after the sublimation to prevent this. There are some great videos on it.
@@judyromano2229 thanks! Watching other videos didn’t really help, so that’s why asked Courtney. I tried the peroxide afterwards and my scorching on that particular shirt actually got worse, darker 🤣 But! Then I washed the shirt - regular laundry, tide pod - and it looks much better. Not perfect but better than after I first pressed it. Meanwhile, I sublimated on another shirt and will bleach it when the weather cooperates. 🤷♀️I’ll keep experimenting.
Do you know its recommended to use butcher paper when doing sublimation. It doesn't hold moisture in like the one you used. I've had this printer for a few months, it works great.
Thank you for your review 😊 I do have one question--does it automatically adjust pressure too? That would be my down fall, trying to set pressure. Thanks, and have a great weekend!
Very cool... I wish I sold... I am just a person who love to do art and make things. I don't want a job...lol. But what a great press....hugs Sheryl 💙🎨💙
Got mine! I am getting ready to make a sublimation 20 block blanket. Can't wait. Thank you Courtney for reviewing. I was considering the Cricut press but when I saw this, it was a no brainer!
Thank you for this review! I’ve been considering getting one. Still trying to figure out the difference between sublimation, htv, and so forth. Maybe a tutorial for that??😂
Hi - do you know the difference between this blue press and the white one? Trying to figure what the difference is so I can make a decision on which one to buy. Thank you for a great review.
Question.. was the red shirt you sublimated 100% polyester? The heat press looks awesome!!! I wish I hadn't bought such a big one and was wayyyy more expensive too
@@jameslee7258 No really, Because its only for like 10 to 15 seconds or you could buy thin board made out of wood...i hear these presses don't really work good for DTF as i have watched a few youtube vids on them...but there is a hack to trick the press by adding the board to get more pressure.
hi, good afternoon, i would like o know what size can i do in the press. l xl 3x 4x 5x 6x can i do that in the press,no one will say,hope you can tell me.
Love your presentation for the HTVRont👍! Received my HTVRONT Auto Heat Press Machine today. And wanted to know if it is normal for the power button to blink as soon as it is plugged into an outlet? Also, I powered the unit on to make sure it worked, turned the unit off but the power button light will not stop blinking (unit does turn off) for over an hour -had to unplugged it to keep it from blinking. Let me be clear, when I turn off the heatpress it does goes off, but the power button light will not stop blinking unless it is unplugged . Is this normal?
As long as there is power going to it, even if its off, it'll blink. It only goes off when you cut the power off. Its a great way to remember to unplug it. I have it plugged into a power strip and I also plug a lamp into it. If I look into the room and the light is on, it reminds me to shut the power strip off. It's safer to have it unplugged from power when not in use. I hope this helps. I love my press
Omg that is the same problem I have and I been looking everywhere to see if it was normal. I contacted they via email and waiting to know an answer. Just got mine two days ago and noticed the same thing. So I think it is. I think I'll just have to unplug it when I'm done using it. Ya im still blinking lol its been like 10-12 mins. So I think HTVRont made it like that. Too many people are saying the say thing about the blinking light. If anybody has theirs with no blinking light please message me.
@Maxa Lynn blinking light is normal. It'll also shut off if it sits for more than 10 minutes. Plus, while heating, it sometimes makes a popping noise. All normal. You’ll love it
I have had my HTVRONT Heat Press since September, and I haven't used it yet. I have been very nervous to use it, and this will be my first time EVER using a heat press machine. I have watched so many videos, until I'm BLUE it the face🤣🤣🤣! But I ran a cross your video today, and I am GLAD I did! You are the ONLY one that I have seen, really explain how to use the machine well😊. You have empowered me to FINALLY use my machine.Thank you so much for the FABULOUS tutorial❤!
I'm just getting this machine. I was like you, watched so many videos until I fell asleep. I was nervous to use it and peel the film off. I did my first dtf today, and it looks good. I'm a little disappointed knowing they have a new one day after I purchase this one.....ohh well, I will try the tumbler one next. Do you plan on purchasing the new one?
I got mine yesterday! Thank you so much for your video.i was a little nervous to use it for the first time,but your straight forward video,and explanation of the buttons,made it easy!!!😊
Yay! You’re so welcome 💜
I have had my HTVRont Auto Heat Press since September 2022 having done the Kickstarter. I JUST tried it TODAY, March 2023. Thanks for your video in helping me just do it!
You’re so welcome!
I thought about getting this one because of the cost but I don’t like how close my hand would get to the heated iron part. I prefer a auto clamshell press that opens up wider. Great video though!
Courtney, thank you for your review. I received mine a few days ago and have one question. On the left side of the panel is the power button. Mine does not go off. I waited 10 minutes but didn't go off so unplugged for safety. Is this the only way???Thank you, Paris. I love this heat press
That light stays on as long as it's plugged in. I don't like that so I plugged my machine into a surge protector. The switch on the surge protector allows me to flip it on & off every time I use my machine.
I’m glad I found this video!!! I have same press and doing screen print transfers for the first time. Has 320 at 12 seconds worked the best for you???
As usual, great video but I just wanted to say how much i love the cup of positivity.. thank you
You’re so welcome!
Great demo and explanation of functions. Clear and straight to the point, thank you. Very helpful as mine was missing the instructions.
Glad you liked it!
I have been looking at this for weeks and wondering how well it works. Thank you for reviewing it on your channel! I have a Cricut Easy Press, but this would be so much easier to use!
Also wanted to share that because of you, I recently purchased a turner from Bama Cups. Can’t wait to receive my new turner!
You’re so welcome! And oh yay! You will love your new turner!
I sub wood and ceramic blanks, if you place anything over the sub paper that is over the blank the design will not fully transfer to the blank, I am guessing the pressure is not enough.
I love my HTVRont auto press, BUT I’m having a real issue with my bleached sub shirts (gildan softstyle heathers) getting scorched. 385 for 60 seconds and the entire 15x15 platen-covered area of the shirt goes from white to light brown. I’ve checked the temp with a digital laser thermometer and it tracks with the 385 setting. Anyway, I just wondered if you’ve encountered this at all since getting your auto press because I know you sub on a lot of bleached shirts… I’ve tried the hydrogen peroxide trick, but that didn’t help… 🙄🤣
Great demo video!!!
I’ve always used peroxide and it’s helped! Maybe try a lesser temp?
@@CourtneysCustoms thanks!! I tried dropping the temp about 10 degrees and the graphic looked washed out. I feel like there must be a sweet spot, but I’m really struggling to find it. I was concerned that this press used too much pressure - the one thing that can’t be adjusted. But I seem to be the only person having this issue 🙄🤣 I’ll keep experimenting
this is a known issue when working with bleach. Some spray it with peroxide after wards and say that helps. Others do the bleaching after the sublimation to prevent this. There are some great videos on it.
@@judyromano2229 thanks! Watching other videos didn’t really help, so that’s why asked Courtney. I tried the peroxide afterwards and my scorching on that particular shirt actually got worse, darker 🤣 But! Then I washed the shirt - regular laundry, tide pod - and it looks much better. Not perfect but better than after I first pressed it. Meanwhile, I sublimated on another shirt and will bleach it when the weather cooperates. 🤷♀️I’ll keep experimenting.
Mine is supposed to be here tomorrow!! I’m so excited. I also got the blue lol!!! Th Al you for reviewing this. (Love your nails btw)
Do you know its recommended to use butcher paper when doing sublimation. It doesn't hold moisture in like the one you used. I've had this printer for a few months, it works great.
I’ve never used it, only Teflon. But I’ll try it out, thanks!
Thank you for your review 😊 I do have one question--does it automatically adjust pressure too? That would be my down fall, trying to set pressure. Thanks, and have a great weekend!
Yes it does!
Very cool... I wish I sold... I am just a person who love to do art and make things. I don't want a job...lol. But what a great press....hugs Sheryl 💙🎨💙
Ta
Thanks for the review very good. Question did you try on DTF transfer?
I’ve been looking at this lately. Trying to decide if I needed a new heat press. Thanks for sharing!
Got mine this week. So excited to use it this weekend.
Just got one today, used it 2hrs ago. Question is HOW DO YOU TURN IT OFF? My press just flashes
I got mine ordered should be here next week, can't wait to try it out
Yay!
Got mine! I am getting ready to make a sublimation 20 block blanket. Can't wait. Thank you Courtney for reviewing. I was considering the Cricut press but when I saw this, it was a no brainer!
Thank you for this review! I’ve been considering getting one. Still trying to figure out the difference between sublimation, htv, and so forth. Maybe a tutorial for that??😂
You’re so welcome! I can definitely make a video on that!
The items looks amazing!!
Continued prayers for you girl.
Thank you so much!!
@@CourtneysCustoms you’re so welcome lovely
Hi - do you know the difference between this blue press and the white one? Trying to figure what the difference is so I can make a decision on which one to buy. Thank you for a great review.
Exactly the same just different color.
Hello 😊 Did you try it with dtf? Did you have some issues and how did you fix them?
Question.. was the red shirt you sublimated 100% polyester?
The heat press looks awesome!!! I wish I hadn't bought such a big one and was wayyyy more expensive too
It was a 60/40 blend
Is there a discount code from your shop to use with this heat press?
Watching you from Panama City Beach, FL. Great video.
Thank you!!
I’m absolutely love mine!
I have one but having issues with the color coming out not fibrant to view on a shirt. Are there any calibration setting s or support page?
If you check out their website I’m sure there’s a “contact us” option where you can send messages. What kind of paper and ink are you using?
The bad thing I've read is about pressure. Uu it's so hard to make the decision to buy it. But I like that it heats up fast.
I've read about the pressure issue too.
have you had any problems with your heat press? Did add a protection plan to your purchase
I haven’t had any issues. This was sent to me by the company so I didn’t purchase anything
Can this machine heat press bedroom slippers too?
No one ever mentions baseball caps in these videos, do you know if you can use this press to put htv on a blank baseball cap?
I believe to make a hat you need a separate attachment
Love it!!!💜💜💜💜💜
💜💜💜
You've been the only one showing a perfect video tutorial and explanations as well. THANK YOUUUUUU
Glad I could help!
Having issues with hoodies and dtf pressing with my device.
Use some Cardboard between the hoodie
@@TheBaconeaterz WOULDN'T THAT BURN?
@@jameslee7258 No really, Because its only for like 10 to 15 seconds or you could buy thin board made out of wood...i hear these presses don't really work good for DTF as i have watched a few youtube vids on them...but there is a hack to trick the press by adding the board to get more pressure.
Like in between the garment
Got mine yesterday. Is it normal that the on button blinks the whole time when turned off?
As long as it’s plugged in it’ll blink
@@CourtneysCustoms Thanks for the fast answer.
Put it into a surge protector that allows you to flip it completely off when not in use.
How’s the press working after doing lots of presses for your vendor event?
Amazing! I really love it
@@CourtneysCustoms what settings are you use?
@@amberstewart3117 it just depends on what I’m doing. For sublimation I use 385 for 60 seconds
hi, good afternoon, i would like o know what size can i do in the press.
l xl 3x 4x 5x 6x can i do that in the press,no one will say,hope you can tell me.
Love your presentation for the HTVRont👍! Received my HTVRONT Auto Heat Press Machine today. And wanted to know if it is normal for the power button to blink as soon as it is plugged into an outlet? Also, I powered the unit on to make sure it worked, turned the unit off but the power button light will not stop blinking (unit does turn off) for over an hour -had to unplugged it to keep it from blinking. Let me be clear, when I turn off the heatpress it does goes off, but the power button light will not stop blinking unless it is unplugged . Is this normal?
As long as there is power going to it, even if its off, it'll blink. It only goes off when you cut the power off. Its a great way to remember to unplug it. I have it plugged into a power strip and I also plug a lamp into it. If I look into the room and the light is on, it reminds me to shut the power strip off. It's safer to have it unplugged from power when not in use. I hope this helps. I love my press
Judy’s comment is absolutely correct!
@CourtneysCustoms thank you. I try to only answer to things that I know for sure
Omg that is the same problem I have and I been looking everywhere to see if it was normal. I contacted they via email and waiting to know an answer. Just got mine two days ago and noticed the same thing. So I think it is. I think I'll just have to unplug it when I'm done using it. Ya im still blinking lol its been like 10-12 mins. So I think HTVRont made it like that. Too many people are saying the say thing about the blinking light. If anybody has theirs with no blinking light please message me.
@Maxa Lynn blinking light is normal. It'll also shut off if it sits for more than 10 minutes. Plus, while heating, it sometimes makes a popping noise. All normal. You’ll love it
I am curious to know what you are pressing at such high temp and 60 seconds. Everything I ever press is no more than 305 temp and 15S.
Before I pressed my items I said what they were. The 385° at 60 seconds was a gildan soft style 60/40 blend shirt
what sizes can you press
Including hoodies????
I got one but did not get 12 free rolls of anything. How do I get free rolls.
So, your free one has arrived, but the one I bought MONTHS ago (1st 500 to buy) still hasn't arrived. Way to go HTVRONT. My patience is running thin.
Oh no..have you contacted customer service?
Does it leave press marks
Nope😄
can you do fulls ublination
How much the price please
I want one!
Jump on that presale price!!
I heard it doesn't let you set your own pressure.
Could you do a video on how to print your own subs and what printer you need 🤍