Once again a thoroughly impressive video. You must be a professional videographer, your work is so smooth and clear. I am inspired to make a vise like this for my Sieg X3.
Thanks for watching this video too. I've made cool improvement in this project, I love my low profile vise, works perfect well. You need to see the new model.
@@tryally will look out for it. I don't do much milling but I have met the limitations with the Sherline vice so its something I may do in the future. Of course I will look at your new one first.
@CVMonte Thanks so much for your kindest word. I'm very happy with this. I think in some day I'm going to show for Sherline, following your idea I have many interesting things in photo of yahoo groups, Sherline Lathe and Mill users, I hope that you appreciate. Kindest regards from Brazil Luiz Ally
Great work Luiz. I like your vice because you can drill holes or shapes in the workpiece you're holding without having to worry about when the drill bit goes through the workpiece. Thanks for the idea.
Obrigado meu grande amigo!! Excuse me because the last video was send without sound (Problem in the hard ware MATROX captures and conversion I'm doing the correction immediately Grande abraço!! Luiz
Hi, I'm hard-working in order to export my products for soon, so when already ready I will communicate you. Thank you for now. Look at this too, more about my work, photos, ideas, accessories, micro-tools etc.. facebook.com/tryallytech?fref=ts You are welcome!
Obrigado por comentar. Então, para cortar chapas de alumínio sem rebarbas eu uso alta velocidade, 5-8000 rpm e lubrificação de 20% de óleo mineral misturado com 80% de querosene. A taxa de alimentação que eu uso, em média, 70 a 100 com cortador completo (totalmente) em 2 mm de minha Sherline, mas sempre uso fresa de topo de metal duro para maior eficiência, e com a Sherline na velocidade original, com 2800 rpm, você pode usar metade disso. Abraços. Luiz
Olá Luiz, parabéns pelo seus vídeos são excelentes. Poderia me dar uma dica para corte em chapa de alumínio naval 2mm espessura com fresa 1/8 2 cortes para um acabamento sem rebarbas (velocidade deslocamento, passe e velocidade do spindle)? Abraço José
José desculpa porque só vi agora sua mensagem, antes o UA-cam avisava as a mensagens e agora não é sempre que avisa. Então, pra cortar chapa com esse tipo de fresa de duas facas eu recomendo alto rpm de spindle, no mínimo uns 10 mil rpm, já o feeed creio que poderá ser nesse rpm e pela espessura da chapa uns 220 mm/m, e se lubrificar creio que pode até aumentar a taxa.
Hi, thank you for the question, So is made by myself, I intent to make a detailed video teaching how to make that. In my most recent videos on my channel you can see more details about the cover. Greetings Luiz
An excellent vise - thank you for showing it.
Once again a thoroughly impressive video. You must be a professional videographer, your work is so smooth and clear. I am inspired to make a vise like this for my Sieg X3.
Thank you very much!
Thanks,
Regards from brasil
Luiz
That's such a good job man!!!
Yes I can see that being very useful. I had issues with the standard sherline vice when I was trying to make the attachment for the compound slide.
Thanks for watching this video too. I've made cool improvement in this project, I love my low profile vise, works perfect well. You need to see the new model.
@@tryally will look out for it. I don't do much milling but I have met the limitations with the Sherline vice so its something I may do in the future. Of course I will look at your new one first.
@@manickn6819 Thank you!!
Thank you very much
I'm doing corrections
Best regards
Luiz
@CVMonte
Thanks so much for your kindest word.
I'm very happy with this.
I think in some day I'm going to show for Sherline, following your idea
I have many interesting things in photo of yahoo groups, Sherline Lathe and Mill users, I hope that you appreciate.
Kindest regards from Brazil
Luiz Ally
Thank you
I will make the correction immediately
Luiz
Thank you
I'm doing corrections
Best regards
Luiz
Hi,
I use the Emc with Debian Linux, This is Software is original Sherline products and free, simple and work well.
Thanks
Luiz
Great work Luiz. I like your vice because you can drill holes or shapes in the workpiece you're holding without having to worry about when the drill bit goes through the workpiece. Thanks for the idea.
Hi thank you
here in my house it is without sound, did you hear the sound?
Luiz
Obrigado meu grande amigo!!
Excuse me because the last video was send without sound
(Problem in the hard ware MATROX captures and conversion
I'm doing the correction immediately
Grande abraço!!
Luiz
Luiz, do you sell your vices in the U.S.A. ???? Do you have a website for your products????
Hi, I'm hard-working in order to export my products for soon, so when already ready I will communicate you. Thank you for now.
Look at this too, more about my work, photos, ideas, accessories, micro-tools etc..
facebook.com/tryallytech?fref=ts
You are welcome!
I agree this is fun stuff!
Obrigado por comentar.
Então, para cortar chapas de alumínio sem rebarbas eu uso alta velocidade, 5-8000 rpm e lubrificação de 20% de óleo mineral misturado com 80% de querosene. A taxa de alimentação que eu uso, em média, 70 a 100 com cortador completo (totalmente) em 2 mm de minha Sherline, mas sempre uso fresa de topo de metal duro para maior eficiência, e com a Sherline na velocidade original, com 2800 rpm, você pode usar metade disso.
Abraços. Luiz
how did u make the bed cover or where did u get it
thank you
Olá Luiz, parabéns pelo seus vídeos são excelentes. Poderia me dar uma dica para corte em chapa de alumínio naval 2mm espessura com fresa 1/8 2 cortes para um acabamento sem rebarbas (velocidade deslocamento, passe e velocidade do spindle)? Abraço José
José desculpa porque só vi agora sua mensagem, antes o UA-cam avisava as a mensagens e agora não é sempre que avisa.
Então, pra cortar chapa com esse tipo de fresa de duas facas eu recomendo alto rpm de spindle, no mínimo uns 10 mil rpm, já o feeed creio que poderá ser nesse rpm e pela espessura da chapa uns 220 mm/m, e se lubrificar creio que pode até aumentar a taxa.
Hi,
This is music by
Terry Waldo
Make Me A Pallet On Your Floor
Jas & Blues
Thanks
Luiz
@netwala Thank you for the comment!
Soon I will post new vids
Regards from Brasil
Thanks for your comment.
Soon I will post new vids.
Regards
Luiz
Hi, thank you for the question,
So is made by myself, I intent to make a detailed video teaching how to make that.
In my most recent videos on my channel you can see more details about the cover.
Greetings
Luiz
The my group is only: Sherline,..
You can see many mine photos and of other there.
I will post in link for you.
Regards
Luiz Ally
The was no sound.