Troubleshooting faucet hot water low pressure, low flow problem.
Вставка
- Опубліковано 18 вер 2022
- The kitchen faucet started experiencing a very low flow rate on the hot water side only. This video covers the troubleshooting steps to identify and eliminate the reason for the issue. A WATT'S FloodSafe shutoff faucet connector is discussed. These connector hoses have the ability to shutoff water flow if a break in the line develops.
As an Amazon Associate I earn from qualifying purchases.
Watts FloodSafe Hoses: These hoses will shut off the flow of water if a break in the hose is experienced.
Watts Flood Safe Sink Connector: amzn.to/3UqdipO
Floodsafe Shutoff for Ice Makers: amzn.to/3BNV4X9
WORKPRO Pliers Set 4-piece Locking Plier Slip-joint Plier Groove Joint Pliers and Adjustable Wrench Home Maintenance Tool Kit: amzn.to/3M0c557 - Навчання та стиль
Thank you for this video! I'm a single mom learning to fix things instead of just believing being told it can't be fixed. I'm feeling very empowered today!
It great to hear the video helped. Many repairs are easy once you have some guidance. Thanks for watching and commenting.
In about 5 minutes we fixed low-flow that a plumber told us would require opening up our wall. Saved us money and frustration. Thank you!
Glad it helped you.
@@FixItDepot hi can you please make a video for the bathroom sink. My Bathroom sink hot water faucet have no water or very little water coming out. The Cold water have pressure in my bathroom sink. But the hot water have no pressure thank you!!
Lol should be the same process.. @@faithalli8533
I want to thank you for this video. This has stumped me and several people on how to resolve this issue. And now I have hot water flowing!
Glad it helped.
The hot water started dribbling out the day off a party for the kids. Watched this video and fixed on 10 min. Even went ahead and did the cold side too. Best pressure since moving in. Thank you!!
Glad it helped!
Thank you! I removed the supply line and found a chunk of rubber washer plugging up one end. Cleaned it out and it works the way it should. Great straight forward videol.
Glad it helped. Thanks for sharing what you found. Helps others to understand what to look for.
You sir are a lifesaver. Thank you so much
Because of your video I was able to fix the hot water flow. It has some rubbery debris blocking the hot water hole. Saved me money from calling the plumber. Thank you!
Glad it helped
Nice job troubleshooting on your own with minimal expense. Clear introductions.
Thanks for the feedback.
Thank you! We've been slowly losing hot water pressure in the kitchen but didn't want to call a plumber. Turns out we had a ton of buildup blocking the line and cleaning that out fixed everything!
Glad I could help!
Thank you for this. My problem was different. Sharing here. We have your faucet but with Motion Sense. The other end of the hot water pipe (not the valve end) goes into the hot side of the motion sense. I took off the hose and there is a small cylindrical white tube filter probably less than (or approximately) 1" long, . The mesh was full of gunk. I cleaned it out carefully with a toothpick and rinsed it. Put all back together. Success!!!
Good to hear you solved the issue. Thanks for watching and commenting.
this was the fix for me, my hot only was running low. I also noticed, on both my hot and cold manufacturer braided lines for Kohler Cruette, there were small plastic flow restrictors on the ends of the connectors. I pulled them out and WOW! Pressure! Thanks, very helpful.
Glad you found the problem. Thanks for sharing.
Was about to call a plumber but after watching this video, I was able to find some junk in the hot water tube and viola, water flow for hot water is back in bussiness. Thank you.
Glad I could help
good video thanks!
Thank You🌸
thank you
This was exactly what we needed! Issue fixed In under 5 minutes. Thank you!!!
Glad it helped!
God bless you
Thank you! Solved my problem too!
Glad it helped!
OMG! I should have seen this video instead of googling for replacment of cartridge. Sure enough I found a piece of plastic in the middle hose after wasting all day looking for a cartridge from home depot. Yes this video was very helpful getting rid of the piece of plastic from the center hose. Sad took me all day looking for cartridge and focusing on cartridge. By the way I sunk the cartridge in a venigar for about an hour while I was working on the other stuff. Maybe that also helped. But for sure I found a piece of plastic and it worked!
Glad the video helped. Thanks for watching.
Very helpful
Glad it helped
Awesome!
Thanks!
Thanks!
Thank you. After receiving over a million views on all my videos, this is my first ever “Super Thanks”. I appreciate your gratitude and taking the effort to do it.
How you fish out the line
Thank you that was our problem, saved me from calling a plumber
Glad it helped solve your issue.
We had the same problem with our moen tap but the plug was right up inside the hose at the fixture. At first it looked like the hoses inside the fixture are pressed in but they do twist out. They are threaded, thank goodness so we got the hose out and put a coat hanger down it to unplug the blockage.
Good to hear you solved the problem. Just wondering, what did you find in it. I have another faucet video where we found solder all in the wall shutoff valve and the faucet internals. Too much solder was used when making up the fittings.
Very helpful: same thing happened to me
Glad it helped.
Thans for this video. I just replaced my Moen faucet replacement hose and when I turned off the water to the inlet valves I noticed black water leaking from the valves. Now I have very low water flow on the hot and cold water sides but no restriction in hoses. I replaced the washers on the valves and they crumbled when I removed them. I'm guessing some debris from the washers got caught in the faucet itself since I blew out both hoses that attach to the faucet. Wish me luck!
Might have some of the pieces from the washer plugging off in the faucet too. I bet you will find and fix the problem. Good luck with it.
I had a total blockage of the kitchen, single lever faucet, after shutting off the supply. Did a similar procedure and traced it to the diverted valve in the head. I had to replace the faucet because I could not repair the diverter valve.
My upstairs lavatory faucet the same issue. I will have to go into the connection by going through the wall
They didn't install a shutoff valve outside the wall? Good luck with it.hope it goes well. Thanks for watching and commenting.
I fixed my problem in life 2 secs. I was turning the faucet the wrong way lol
Hi this is super helpful, we have the same issue that hot water pressure is low but cold water is fine(other faucets in the house functions well), we first shut off the cold water valve, keep the hot water valve open, the water pressure is ok, then we turn off both valve, get the hot water line off from the faucet(just like you did in the video 1:24) test the hot water flow, it is still fine, then we thought it might be the faucet's problem, so we took another same faucet in the basement which functions well, replaced the problemed one, still get the same low hot water pressure, do you have any idea what would the problem be?? thanks!
Since two faucets functioned the same, I tend to think it might be the shutoff valve itself or trash in the line, but can’t be sure. Watch this other video I have and see if that helps. It’s title is “How to fix a kitchen faucet with low pressure and flow. Change shutoff valves and remove debris.” In that one the main problem was excessive solder being used during installation and it was plugging off the shutoff valve, hoses, and faucet parts. I hope it helps.
I have the same faucet. Buy both hot and cold have no pressure. Can you help?
Then you must be plugged in the faucet. I would inspect the cartridge that is under the handle. Look for something that is plugging it or maybe just replace it. I don’t have a video on how to do it. Try to find one, but turn the hot and cold water supply off, remove the handle, unscrew the retainer that holds the cartridge in place. Remove the cartridge. Based on what you see either remove the obstruction or replace the cartridge. Good luck with it.
hi so we have not hot water in our sink and we only have a cold water valve? what do we do to fix? we have a dishwasher and disposal hooked up?
If you don’t have hot water to the sink, you’re probably going to need a plumber.
I have the same faucet. No cold water coming out.
Same issue in my guest bathroom except the water flow in the tub right next to the sink also has low hot water pressure. I don’t see any blockage and even replaced the old galvanized and copper piping. Any recommendations on what else it could be?
There is a good plumbing channel called “The Grumpy Plumber” and he said to check the inlet and outlet piping on the water heater. Said it sometimes plugs up from electrolysis and you just have to clean out the pipe nipples. I have not experienced this, but he said he always checks that when there is good cold water pressure and low hot water pressure. Hope that helps.
@@FixItDepot Thank you!
Thank you made me look like a champ in front of the wife
For the past….10 years our soaker Jacuzzi tub has had an insanely low amount of hot water pressure. I didn’t have time to figure it out and my wife seemed fine with it. But it always bugged me. Finally had time today and found the cutoff valves and the hot water was almost closed. Ugggg. So opened it up and now the tub fills in 5 minutes instead of 30.
Was it solder plugging it or something else. Glad to here you got it fixed.
@@FixItDepot It was as simple as the valve just being almost shut. I turned it open and there she flowed! I can't even begin to imagine why it got so closed.
why no larger horse available?
Don’t really know. It’s so short that you don’t get much pressure drop across it.
What if my problem is not with the hose itself
Sometimes there is solder material in the valve, hose, or faucet valve cartridge or nozzle. Sometimes it could be a black rubber gasket (oring) that has swelled up and slowing down flow. Hard to guess without knowing all the details.
I have the hot water hose going up straight into the faucet and nothing to unscrew mid way.
What do you suggest we do in this case?
Sorry but not sure I can help you with the limited knowledge of your situation.
All I need to do is take a plug or something to stop the water from a hot water heater into my kitchen faucet with the plug has to be on the faucet side can anybody help me I don't want to take the whole thing apart I'm a senior citizen and I can do with cold water
And no I cannot replace the whole faucet I just need to plug the old faucet I have in there now I know it was in the trailer I bought in 2013 I was told it was a regular household kitchen faucets
@@billieseymour9746 Hard to give further guidance without knowing your situation. why can't you just shut the hot water supply valve under the sink.
There is no cut off
But did figure out how to plug the hot water side faucet. Thank you so much
in my case, after closing the water, the water still flows in a small stream
we taking about faucet …not supply valve
Not sure if you are closing the supply valve at the wall or the faucet. If it is the wall valve, then you probably have trash in the valve that is causing it to not seal. Try flushing out the trash my opening and closing it while the faucet is turned on.
You probably need to changeout the internals of the faucet.
@@FixItDepot thanks
A a