I got a 77 monte carlo which i converted to power windows. The issue im running into is since i replaced the door weatherstrip my windows dont want to roll up all the way and im noticing the motor losing power. The weatherstrip is a reproduction but matches the old one. Any thoughts.
Most windows need to be adjusted after installing new weatherstrip. Take a piece of paper and slide it between the glass and weatherstrip and see if you can find some tight spots. If so, then make adjustments to the window until the paper slides evenly around the glass. If everything is adjusted properly and it's still slow going up I'd replace the window motor. In some instances the spring on the window regulator gets weak or breaks and that will cause the same symptoms. I have a video on window adjustments on my channel under the title of "Window Sweep Replacement". Hope this helps.
No one that I'm aware of reproduces the regulator or any parts inside the regulator for these vehicles. Your best bet is to find a good used regulator and replace your broken one. We have several in stock and our website that we sell these parts on should be functional in the next couple of weeks. You can contact us on the website g3garage.com or send an email of the details (right/left/2DR/4DR, etc) on the part(s) you need. Thanks for your comment.
@@g3garage thank you for getting back to me so quick, yeah my passenger side on my 77 el Camino got stripped and I didn’t know if you could replace the gears or what, this is my first time messing with my windows like this so I’m trying to learn as much as I can before hand and your videos helped a lot I really appreciate your work and explanations for 73-77 cars you do good work I’ll definitely check out your site
when you were testing it did you ground the body of the motor? seen alot of techs I worked with bench these and not do that and think the motor was bad.
Wow thank you for making this video I am working on my 76 Grand Prix and I have video suggestion. Can you make a video for relpacing motor and regulator. I am planning on replacing both the driver side and passenger side with a kit from eBay … thanks
Not sure if I can help with the regulator replacement. The aftermarket kits a quite a bit different from the factory GM stuff and have not had a chance to work with the new aftermarket kits. Thanks so much for your comment.
Couldn’t find a B body video but this helped me a lot with my 73 Delta convertible thank you
Glad this helped, thanks for your comment!
I got a 77 monte carlo which i converted to power windows. The issue im running into is since i replaced the door weatherstrip my windows dont want to roll up all the way and im noticing the motor losing power. The weatherstrip is a reproduction but matches the old one. Any thoughts.
Most windows need to be adjusted after installing new weatherstrip. Take a piece of paper and slide it between the glass and weatherstrip and see if you can find some tight spots. If so, then make adjustments to the window until the paper slides evenly around the glass. If everything is adjusted properly and it's still slow going up I'd replace the window motor. In some instances the spring on the window regulator gets weak or breaks and that will cause the same symptoms. I have a video on window adjustments on my channel under the title of "Window Sweep Replacement". Hope this helps.
@g3garage ill definitely check that video out then try adjusting it. Thanks for helping me out. Much appreciated.
Do you know if on a Manuel regulator if the small gear that’s spinning from the hand crank can be bought an replaced
No one that I'm aware of reproduces the regulator or any parts inside the regulator for these vehicles. Your best bet is to find a good used regulator and replace your broken one. We have several in stock and our website that we sell these parts on should be functional in the next couple of weeks. You can contact us on the website g3garage.com or send an email of the details (right/left/2DR/4DR, etc) on the part(s) you need. Thanks for your comment.
@@g3garage thank you for getting back to me so quick, yeah my passenger side on my 77 el Camino got stripped and I didn’t know if you could replace the gears or what, this is my first time messing with my windows like this so I’m trying to learn as much as I can before hand and your videos helped a lot I really appreciate your work and explanations for 73-77 cars you do good work I’ll definitely check out your site
@@Fp49274 Sorry, forgot to give you the email. Its sales@g3direct.com. Let me know if you have any more questions and I'll be happy to help.
when you were testing it did you ground the body of the motor? seen alot of techs I worked with bench these and not do that and think the motor was bad.
Yes, it was properly grounded. See the 1:20 minute mark in the video. Thanks for your comment.
Wow thank you for making this video I am working on my 76 Grand Prix and I have video suggestion. Can you make a video for relpacing motor and regulator. I am planning on replacing both the driver side and passenger side with a kit from eBay … thanks
Not sure if I can help with the regulator replacement. The aftermarket kits a quite a bit different from the factory GM stuff and have not had a chance to work with the new aftermarket kits. Thanks so much for your comment.