Stihl oil pump adjustment, clutch removal, oil pump or worm gear. Part #'s and vid of oil pump mod
Вставка
- Опубліковано 15 вер 2024
- Sthl 441C oil pump
1128 640 3206 - Stihl Oil Pump 0.8mm
Stihl 044, 046, MS341, MS361, MS362, MS440, MS441, MS460 chainsaw
Replaces OEM part: 1128 640 7112
• How to increase flow o...
I really appreciate your help. I've never seen one that wasn't notched out on the bottom to access the screw. I'll pull it out tomorrow and give it a look. I need to do some cleaning and maintenance on it this week anyways. I'll tryin increase the oil flow and retry the 28" bar. If it's still lacking I'll add the oiler to my next to buy list.
Good luck, once you clean it up and in good light, I'm sure you will see the screw head, it's in there about 1 1/2 inches.
@@jimssawsnstuff8903 cleaned it up out in the light with some carb cleaner. I had use a bigger screwdriver to pry over the saws suspension a bit to find the screw,but was able to adjust it about a quarter turn. I put my 28" bar back on it and checked for oil spray off the bars tip and it is measurably better. I tried it on a 26" red oak log and after a couple cuts you could certainly tell a difference. Before the bar and chain would be hot and caked brown from hot chips and dust. Now it's much cleaner. I cant thank you enough for your help,but you have earned a subscriber. I'd of never of found it without your help.
@@ciphercode2298 right on, glad to help. 😎👍. Tell your friends to subscribe 😉
@@jimssawsnstuff8903 I will,thanks again
Thank you very much. I should have a video on my channel soon. Have a great day!
Glad that helped, Thanks for checking out my channel, like and subscribe and if you need anything just let me know and I’ll try to do a vid to help you out.
Can a Stihl chainsaw (gas or electric) leak oil from the flow adjustment screw? For example, if the screw is loosened too much?
It should not.
Great vids man i hope my shout out helped some im gonna try to throw it in another vid or 2 one that i think will get some views
Thanks man, I appreciate it.
You put the cash into your toys, love all the new bling you're showing off on your channel! 😎👍
@@jimssawsnstuff8903 i do but its mostly cash that i make from cutting or flippin saws as i dont fell timber full time just a side hustle and a hobby for now may change before long and i do it some for the channel just tryin out different stuff but yes it does cost a bit but i try to keep my cash and saw cash apart lol sometimes it dont work out that way
@@MitchellsBackyardLogging yes, it's an addictive hobby 😎👍
@@MitchellsBackyardLogging one of the best buys for me has been the Oregon Versacut bars in 24". They are aluminum core with good steel sandwiched on the outside, so the bar is pretty rigid and the rails last a long time, but they are as light as a Stihl light bar, only about 1/2 the $.
They don't have a replaceable tip, but most of the time it's not the tip that goes. 😉
@@jimssawsnstuff8903 i may look into those