Ford F150: "Check Fuel Fill Inlet" Message On Dash
Вставка
- Опубліковано 20 жов 2018
- In this video, I have a look at a 2010 Ford F150 that has a message on the instrument cluster saying, "check fuel fill inlet." A.K.A., the gas cap on this capless system. It also has the engine light on with a P0457 (EVAP Gross leak) code stored in it. Before you go throwing a smoke machine on it, make sure and have a look at the purge solenoid. -Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained - Авто та транспорт
@8:05 you hooked the purge valve to a train horn???? magical lol
Congratulations on breaking the 200 thousand subscriber mark. I've been with you from the beginning.
With all these newer vehicles going to these "capless" systems, it's great to see a video about how a purge solenoid can be there real problem versus going on a wild goose chase looking back at the tank/filler neck. Great video.
great diagnostics. had the same issue with my 2010 Fusion. very intermittent P0457. when the 'tap-tap' fixed it i changed the purge solenoid and the code never came back.
A perfect video to show how the understanding of system operation simplifies and expedites the process of troubleshooting and repair.
Outstanding job of explaining it for us. You're getting better all the time. Thanks Dr. O!
You're getting better all the time... Hey, they should make that a song! 🤣
SMA vid to end the weekend properly !! Thanks Eric
Greetings from Alberta Canada Mr. O, keep up the good work . good to see a mechanic that really cares and goes that extra mile . you have a sub out of me !
Nice work, thanks for explaining the system. I am UK, and I think we do not have these systems, but always good to learn.
Keep up the good work, you are appreciated.
I could seriously watch this channel all day keep up the good work!
Good job Eric. Love the content as always. Just had a catastrophe with my jeep. Replaced hub bearings and I boogered up the threads on the axle nut on removal. Love rusty parts. Got it changed but it cost me an axle.
Great Diagnosis. Thanks for taking time to teach us.
Oh damn, the two handed reach around! Eric has skills! 😆
Very informative as usual. That said, this is the kind of video where you (Eric) employ reasoning and technique involving several parts of a system that may be slightly mysterious to viewers, in which a quick white-board-of-knowledge would double the interest and education. I for one have not been entirely clear on how the gas tank, evap canister, the purge valve and intake manifold relate, and what part does what during what phase of operation. And how that does or doesn't relate to systems that seem to have a dedicated vacuum pump to test gas tank leaks.
Every tools got a hammer side! Nice video as always. 👍
Thank you Eric. Free tip Friday on a Sunday. Five days early. Sweet. I appreciate your videos. Have a good week.
Or was that 3 days late? :-)
I thoroughly enjoyed the information. To see the data when it was working normally was helpful.
Eric,
Another great video and diagnosis! Its great that you have the experience to zoom right in on that purge solenoid when us mere mortals would be left guessing if it was the purge solenoid, vacuum line, fuel inlet/gas cap, or even vent solenoid (see you've taught me well).
SMA#1
God bless
Paul
It would be great if there was someone as honest and helpful as you are in Calgary Alberta. SMA rocks.
Nice one Eric. Thanks for sharing!
Great stuff as usual! I mounted and balanced 24 tires yesterday - that time of year again. I'd rather be diag'ing a FoMoCo EVAP leak!
I was also handed a spaghetti mess of a plow wiring harness I need to hook up, then figure out from a box of parts what is needed to make a plow work ... a plow that isn't on the truck. Guess I can imagine it ... 😁 Got some figuring to do ...
Thanks for the video. My truck’s been giving me the same message. Now I know what to look for.
Awesome easy test for direction. Thanks for the short little video
Sunday night SMA. That's pretty cool!
Auto engineers, it should be mandatory to watch your videos, so they can really learn how to buld autos, Thanks for your time and knowledge Bill N
Love watching your videos this just helped me on my 2012 F 150
Had a sticky purge solenoid on my wife's Corolla like this, I took a gamble and opened it up. Found the seat and pintle were both sticky so I cleaned em and put it back together, problem never came back!
Brilliant job!! Thanks for the video!!
I just had this show up on my f150 2010 with the crappy triton engine. fun times. Day later... mine was the problem as well, no vacuum. I was happy to see that my Blue Driver tool was able to tell me the vapor pressure and command numbers in live data. Thanks Eric!!
@@crisprtalk6963 what do you mean by crappy Triton engine I have a 2010 F-150 with a 4.6 l V8 Triton engine and it is great I'm over 220,000 mi and have had no engine trouble whatsoever.
Eric O., in the know! Another good show!
Great video Eric
Ford always puts the sensitive parts in the hottest spots I think this by plan
Planned lack of planning, actually. Thanks Henry!
Almost time to come out with south main auto repair automotive DVDs with all of the videos you have created..everyone will want to buy them
Good to see
on a Sunday night!
Thank you for all u do !
As always. You the man!
good testing on the purge...new phasers.... bank 1 cam and rockers too
My 2010 F150 with the 4.6 seems to be built quite different. Nice one Eric 👍
Awesome job bro.
Good information thanks
EXCELLENT JOB WELL DONE 👏
Thanks for the video.
Another Great Video.. Thanks Eric O....
As usual great video
excellent evap diagnosis
Thx ! I just saw this popped up in my scree. Thx
hey, love your channel. Just found you recently. I live not too far away east of Corning. I'm going to call for an appt and have you look at my Tundra. I have an intermittent check engine light every time it rains. EVAP codes saying it's a gas cap...which it isn't. I also would like to have the underside sprayed to resist rusting and stop whatever rust is already there. Talk to you soon.
Very good info sir
Been binging through your videos since last night. Playing them in my sleep, not saying that you put me to sleep but I've been dreaming of broken Dodge's since I just got a free rusty Dodge Dakota from New York (I live in Florida btw and I'm not used to working on a rust bucket) and I'm getting ready to do an overhaul on it. Lol
Sticking your hand with the needles is a great video
Oh my!! You got one on Ivan!! That's pretty funny. How ever, I'm not pulling him off of you!! Lol
You are about as famous as one can hope for. From another automotive site with a Denali on the rack: "I'm not going to Eric O this thing".
Ive been binge watching your videos and I try to diagnose the problem in the beginning of the videos before you find the problem and so far im 1 for 30. Not great
This video saved me a lot of headache and money
You are the best my friend
I did see the light dim during the test for sure.
A new code? Did that thing just break before our very eyes? 😂 Nicely done, Mr. O.
It's a ford....get used to it.....
BFH (big hammer) to the rescue! LOL
Thanks for the video.
thks that nice work
Light is flickering and dimming working great so is the scan tool working great
I wonder if the o2 sensor code pops up because you just forced those fuel gases into the intake without the truck doing it itself. I wonder if it starts a sequence when it uses the evap system where it knows afr eill go to crap so ignore the sensor until it's done with the test. By doing it manually you're probably testing the solenoid itself and not commanding a check thus the truck reading rich rather than normal 14.7:1 or whatever it is for that truck on idle. Regardless, great video!! I like how people like you explain things so we can save time and money chasing gremlings! Keep it up bro!!!! Watching from PR!!!
Nice video little fella...
Quality diag. Thanks
Great video, would dousing the purge valve with carb cleaner be a fix, since it's sticking but otherwise operational?
You need to come to the Sema Show this year. Your buddy will be there.
my wife thinks im crazy i i wach at least two a day , keep it up
Wonder if Eric first put a new cap on it then soon realized it wasn’t the problem. Boom new video haha
On the *capless* filler?? How would he do that?
Yea whatever that part is green and has the little flapper that never get covered on the opening to the gas filler
I subscribed
The magic of Eric O sweet 😀🇬🇧
Thanks for the Sunday night vid Mr.O, gave me something to watch other than having to watch The Walking Dead with the Mrs.
I heard the Brake Clean train!
Choo Choooo!
The train Tooted as a thank you .. Made completely out of used brake cleaner cans ... Took a month to construct
I'm thinking he has a giant tank out back :))
Poor Ivan... Getting alot of busting lately... He's got a few years behind u and Keith im guessing not insulting anyone lol... Good video mr o...
Great video thanks for sharing. What is the Name & Model of that Scan tool you are using?
another thing that can cause the evap code is a dirty seal in the capless fuel fill neck. i have had this happen on my 13 explorer and my 2010 f150. used the out of gas adapter and WD-40 to clean and refresh the seal. the explorer required the use of a rag as well which is pretty difficult to do but it beats replacing the fill neck.
Do you clear the codes after or let the computer do that on its own? Also i’m getting P0442. Thank you
@@Sheeeeeeeeeeeeiiitt cleared the codes and waited to see if it set codes again. you really have to jam the fuel funnel in there like 90 times after spraying the WD-40 a bunch in-between thrusts. It might also be the purge valve though if it doesn't clear after 3 full drive cycles and you have a good seal at the inlet.
@@majornofun1503 Appreciate you responding and that’s great info you shared too about the drive cycle. Thanks again
Mr. O when I come to NY, I'm going to bring you some conoli's
I had the same problem with my Acura TL, I would get the "check gas cap light " and it would randomly have a hard start because it would get stuck open which would put to much fuel vapor in the combustion chamber.
Experience counts a lot.. I was hoping for the smoke machine, but the "smack it with a tool" test won that one
Great video as always I've been a subscriber since almost day one and for the first time I have a question for you I have a problem with my 1996 Lincoln Town Car 4.6 L with 74,000 miles on it I had a surgical procedure done the car was parked for a couple of months my daughter went down to start it for me since the car lives outside and believe it or not it's not rusted LOL I live up here in Rochester New York well the question I have is when she went down to start it it was completely dead I mean nothing no dash lights no nothing and there was plenty of fuel however when she went to start it with a jump box that I have which puts out a thousand Peak amps it's not one of the little ones it's the regular size like your blue one it would crank over and start but then die it did this several times and still will not stay running is it just the battery is too dead to take a jump from just the Box and should I switch to having somebody jump-start me with jumper cables and a car that is running? I'm so confused LOL I am 65 now and have several doctors appointments coming up I need your help buddy what could be wrong thank you in advance
How do you know what wattage to use for the light bulbs? Do you need to stay away from injector drive circuits? Thanks!!
Have you given your 4.6 a hug today? I need to give my 4.2 v6 one. She's been starting a little rough lately.
Thanks
Hey Professor O' I want one of those SMA zipper hoodies:)
Free tip Sunday!
Great Video! I used to be able to do that test with the Ford IDS and "MAKE" the system pull a vacuum to check the pressure sensor.
Nice quick diag Eric! Keith would be proud! Send me that used purge solenoid I'll rebuild it for ya ;)
Fire up the wd40, it's on the way!
I got WD-40 for days xD Can you send me another can of Kroil too Eric? I'm still using that first can you gave me lol!
Would it be safe to assume that a malfunctioning purge solenoid would eventually lead to a plugged charcoal canister and therefore a vent issue? Having trouble getting gas in a 2011 F250 6.2 chassis cab.
I've a 04 f-150 Heritage 4.6L with a intermittent ABS light ...no codes and as soon as I hook up the scanner to check ABS codes the light goes out, also resets after turning the vehicle off any clues would be appreciated
Nice diagnostics as always. But, I would have LOVED to see the limbo you had to do to get at it to replace it! :)
ERIC O @SOUTH MAIN AUTO Do you have the elite version of the alltel scan tool
I kept getting that on my 2011 Ford Mustang 3.7 V6 it ended up being the fuel filler neck
Hello from the uk...👍
Evap codes...something we dont get here
great tech tip but go easy on ivan lol
My Hyundai Santa Fe throws O2 sensor codes from the purge valve. Spent a weekend chasing codes and found the clamp to the purge line was not attached. hooked that back up, cleared codes, it's been fine ever since. no parts required.
Hey Eric -- quick question. At the beginning of the vid, when you commanded the purge solenoid on (with the scan tool) and did not see a corresponding reduction in tank pressure, you concluded that either the scan tool was not working, the vacuum line was plugged or the the purge solenoid was bad. Couldn't a faulty fuel tank pressure sensor also cause the symptoms you were seeing? What allows you to rule that out right away? Thanks again for your channel, Eric. Best one on YT bar none!!!
How much is it for a Ford F-150 2005 to check the fuel cap in it? My dad’s dash board says that.
i just came across the toyota "NON- SERVICEABLE" transmission and it was so damn frustrating would love to see you do a video and explain it
What year & model? I'm curious
What Toyota vehicle are you referring to ?
Dr O had a 'non-serviceable' KIA... He did indeed fix it. Saved the owner $1500
@@applejacks971 I agree, just because something is posted as non serviceable, I'd prove otherwise. At least to drop pan & filter, and refill. Sometimes it's difficult though.... having it level and high enough to remove fitting, while running to refill though. I don't believe in non serviceable anything. Lol Just another way to "bend over" the customer and avoiding maintenance.
90's grans prix and bereta pillar door handles. Stamped metal, super junk.
Do you have any videos on the evap system of a chrysler?
The o2 exhaust sensor code was from when you disconnected the vacuum line performing the test. Nice way to end the weekend with a good South Main Auto video. Nice informative video.
every time i see him in that zip up hoodie, i think he's going all Gangster and wearing a chain haha. Mr. Spicy Italian haha
Haha yes! #spicyitalian
Reminds me more of Mr. Rogers. Eric’s friendly and dropping knowledge all over us. That’s right, I just compared Eric to Mr. Rogers. Boom!
will all car or trucks do this with the cellnod
is that purge valve in the same place on a 09 4.6L f150?