All new BT100 V2!! and this thing has a secret on the inside - BBR 80/100cc 2 stroke tear down
Вставка
- Опубліковано 28 чер 2024
- 4 years in the making and the wait was well worth it! We see all of the ins and outs that make up this new beefcake of an engine. Unboxing and full engine tear down!
Get yours today! Use code MOTOREDLIFE www.bikeberry.com/products/bb...
Check out the V1 first version here • This BT100 is crazy!! ...
0:00 Intro
0:56 Unboxing
4:36 We meet the BT100 V2
7:06 Engine Teardown
9:15 Built-in reed valve
11:16 Iron sleeve?
15:10 Final Thoughts - Авто та транспорт
Alex, thanks for calling me back was surprising to hear from you. Watch you all the time Thanks for all your advice and getting back to me fast
very interesting seeing all these motorized bike motors evolve
Can't wait to see how it runs right out the box and after the break in period
Good-luck with that,🙄, Alex only makes video's when someone sends him something for free,🤑, these companies sending him stuff should demand more than just one video from him.😋👍
Good to see another video my man!
I think this is what we have been wanting from a 100 they already had great power but they always got to hot and melted the exhaust side of the cylinder walls and piston this iron sleave and more surface area of fins and the humongous head this should last at 3/4 / wide open for as long as you want and be able to do the long distance drives a modified 80 can do like 200 300 kilometers round trip
Great Video, Lots of information. Yea They did it Right, I AGREE on thee THUMBS UP, definitely going to be a HOT Little RACE!
I can forcast fuel boiling issues with that carburator so closed to the power plant
I actually like the 2 bolt chain tensioner because of the straight vertical adjusting slot. I just drill out 4 corner holes and make it a 6 bolt. I wrap skateboard grip tape on the frame chain stay where I clamp the tensioner and it dosen't move at all.
$350+, 6mm mounting instead of 8mm, Only one proprietary exhaust option & finally no piston port variant. Very hard to make that purchase when you can pay $80 for a 49mm iron bore.🤔 Did you pay for it or did the bike berry dude hook you up?
Agreed, overpriced junk
😂 I think the BikeBerry guy set him up. Ouch.....I have a 47mm china Doll that could take this motor on😎
ua-cam.com/video/0RzH1eDA6lE/v-deo.html
Agree.
Anyone else notice the 3 huge cracks in top end 2 in head? It's so huge cause so poorly made only way it doesn't overheat lol
Bt100 has lots zink in casting materials made in chin lousie indina foundries. Lots zink cadmium makes it crack easy. All the metal is pot metal in bt engines. Same factories that make hone drpo (amazon brand) weedeater things blow up after 7 uses worse then China made castings lolz steel probably flung cast steel then bored out with razorblade 😂 you know for sure this was a freebie arsh kiss video😅 so huge cause all zink retains heat
Lack of sleeve index point is dead give away spun casted steel sleeve. Zink makes it nice dull shinny white color though😂 oil resistant easy to clean😮 best thing this whole damn engine is fact it has 14mm pistion wrist pin lol
laws in my country are changing, I might be able to legally ride with this engine on my bike, cant wait
Please do the 300 mile update Full Send Video. Love the vids Alex. Overpriced engine. Rather get a Phantom but still nice
Lol 50mile 😂 video 300 is only is Jesus personally drove it😅
I would like to see the bore and stroke checked to make sure the stroke is 40 mm not 37 mm also would like to see how they stuffed the case. And also would like to see what the transfer ports look like with the person at the bottom center to the transfer ports clear of the piston are does the piston block part of the port which would restrict flow into the cylinder?
Happy thanksgiving alex❤
Já estou ansioso pra ver ele no Dinamômetro!
My bt100 has 3 piston rings the bt100.2 on the video only has two will this change the compression?
Also those reed valves look amazing, engine size might be a little too hunky for a pleasant ride and a two piece jug might have compression loss if gaskets are not seated properly. All in all looks amazing hope it performs wonderfully yet I do have some concerning questions especially heat transfer to carburetor and piston performance with one less piston ring
looks pretty quality
Those transfer ports look like they’re barely angled. Almost like the BT 80 electric start motors and the 110cc motors.
Yea I want one.
I thought u had to have a windowed piston with a reed valve? Piston not windowed so has does that work?
So is that iron sleeve replaceable?
Does the head fin top fit on the Pantom 85?
I have a question, i have a bt100 v1 and as far as i know, the only mods/upgrade i can do to my engine is to change the block/cylinder head to make it v2. I didn't see any video on YT modifying this engine or even any of the shelf parts that's plug and play...
So theres the question, what other mods can i do to the engine? Thanks...
I'm going to buy the phantom 85. I got some questions on what would be the best kit to get I'm looking for 45 to 50 mph and Reliability.
How do you know it wasnst locktited and torqued down
btw why they don't wan't make the magneto little bit bigger and heavy and aslofo flywheel wheight get heavy to, cause they importarn for get inertia movement from that magnetto to help crankshaft rotate easily???
That's a lot of "nice and clean" for a brand new engine lol
What is the white wire for
The only thing that sucked right off the bat was there's no 12 mm piston pin clip
Can I get a good Recommendation on 2 cycle oil I'm buying a bike in the next couple of weeks and I'm trying to find the best oil to use for it. Thank you
Opti2
Is it better than the LD100?
You should see if that top end will fit the fisrt gen bt100
It does!
Bro what happened to Zeda motorsports??? Was it a scam after all??
Lol Zeda is so 2019
BUT DOES IT HAVE A WINDOWED PISTON FOR THE REED VALVE YET?!
No window in the piston seems off
The engine look nice but i dont like the reed valve side way
New vids?have you ran it yet?
hopefully they aren't to big for certain frames
You’ll be damn sure it is, that looks pretty beefy
True the iron sleeve will last MUCH longer than an aluminum one
It’s so fn thick. Bored out wouldn’t be something I’m opposed to seeing
I’m looking for a throttle for my motor bike I see that we both live in the same city
So what happened with thia engine?
,,how much the price
Hey Alex😊❤
We're is the ride video
Big fins for cooling is good but it is also bad. a big engine does NOT fit in most bicycle frames.
Thats! 100 CC Low price 🚴 engine Look's nice. If have know how , parts everything nice meby about 12- 15 HP.
No squish? Way?
does this cylinder fit the old bt100?
yeah , bike berry has a video on it
it's better than v1 but too much $$ and now fits in wayy less bikes. what's it weigh, is it a pig?
Где купить такой мотор пору штук бы взял
I'm sold/
👍💯🐟👋👋👋👋👋
Let’s race!
I do not see any technology improvement to justify the price. It's only look better.
You my sir are blind in every way possible
@@z28kid71 5 other's so far agree with my post comments. And we are the potential buyer's.
@@z28kid71 Just a different cylinder bro. Go ahead and buy that turd then.
Gravity does not play a part on reeds when it "sideways." However gravity would play a part on the bottom reed if it was oriented up and down.
these drive gears should be 13 teeth not 10.
Oh' i donth' wahnt have the! Big moulf bat i forget too' thold be'fore Open the original engine doo' First Name: Druck Probe. If everything Name: dicht 85- 95 % soo' No Name: dichtflächen Fehler. Jes after meby poriting.
Another pos for $350. Carb and exhaust are junk. Come on stop trying trying to fool the new guy. So you can put money in your pocket!
Let's play along and say this will make 5hp. That's enough to go 60km/h (37mph). Downhill 70-80km/h. If you're going that fast on bicycle tyres & brakes (even hydraulic discs) you are a hazard to yourself and others. These things look cool to kids & convicted drunk drivers but more than a few people get killed on them.
@@vk2aafhamradioyou can get Michelin E bike tires rated for 90kph ,even track pedal bikes go 50kph+
@vk2aafhamradio Well just take the brakes off then!😂 'Most everybody's got shoes👞! 😜
Wow what a horrible job, v1 bt was better, this thing is overpriced junk
I can't believe he doesn't have one thing bad to say about.🙄😒 He's all over Tony from dingleberries nutz.
excited? For another super cheap jank ass 2 stroke? nah, man. it's 4 strokes or nothin. I use these motorized bikes to make money. When they aren't broken on my porch. Which is 85% of the time. I'm done with 2 strokes.
For a newbie (myself) what engine would you recommend?
Note. I'm considering for use as a paramotor? Also your recommendations on most reliable 2 stroke you have been exposed to? Expansion chambers and modifications?
My thinning is that if this is your bread and butter you are going to have some experience about various different engine types and modifications?
I do acknowledge your dislike for 2 strokes also, but as a paramotor application running mostly as a stationary motor most of the time? I'm considering power to weight and hope you can look past your exposure to these motors in a motorised bike application?
@@jameshatton4405 bike motors have reduction gearing to drive a bicycle wheel, not a propeller. Even if you could make it work, you definitely don't want a low quality, low reliability bike motor to go flying with, at any price.
@@vk2aafhamradio I'm new to this, and planning to do my first motorized bicycle build soon. Is there such thing as a bicycle motor that's NOT low quality? If so, 🙏please, do tell, and point me in the right direction?