For folks who have never done this before: he’s removing air filter box etc just to access where the fuel line connects to fuel rail. If in your engine layout you can access that point without air filter box in the way, you can leave the air box alone. 😅 Great video!
Well done, as a professional automotive technician I really believe that all of this is gonna work, especially for Iraqis fuel which is extremely bad fuel
@@AliMECH what took auto mfg sk long for a access door to fuel pump.Old days had to drop tank.but id use a grinder and cut my own access door and patch with metal and rivet.
Veslee's carb cleaner has instructions for fuel-injection systems where you can spray half the can into half a fuel tank. No idea how effective it'll be but hopefully it helps with pistons too
i can tell you that the cleaner through the fuel tank may not work. in my case it didnt work. i have put 3 different sets of injectors on an old 1986 skyline and all jammed up doing it that way. i just found this man's videos. this is how i'll be fixing my problems without a doubt.
@@vsvnrg3263 One can always disassemble them and use the carb cleaner directly into the injector. Or, from months of extensive video consumption, just use premium diesel/gasoline from reputable companies once in a while. Cuz those things works wonders for the fueling-injection system. I've stopped using regular diesel and went with V-Power only. That's for sure. Or you can go with halfsies (1/2 Premium; 1/2 Regular), for a more economic approach. Just don't mix them from different brands.
Pretty good video, but just so it never gets to where u have to do this, I would just suggest getting high quality fuel in the car with injector cleaners added after every oil change.
2:35, yeah, I didn't like taking the gasket of the fuel tank off. What if you run a pipe from the engine fuel line and direct it to a bucket, so granted you will waste some fuel but it is way better than taking the gasket out of the fuel tank. Then you can continue the other process as normal, maybe because the engine cannot maintain pressure, it may not allow you to do so? Is there any other way? Tapping into the harness somewhere else? Disabling a relay while keeping the fuse in?
Great video, and very clear process! Do you know if I can disconnect only the fuel pump fuse, not the harness, and still do this on a 2006 Lexus IS250?
@@baronde7063 No, this method not for diesel engines, i recommend removing them and clean them out of the engine, i have videos about that, i will do some tests in the future videos to find a way for diesel engines as well
Hello..Anthony Martin Emergency Mobile Mechanic...Great tip...Buy Refirbished set fuel injectors..Mileage on fuel injectors plus ethanol percentages with fuel always factor....Star Tron Enzyme Fuel Treatment the best.....Take Care...
Hi AliMMECH I woul like to do this procedure on my Yaris 1.0 gasoline of 2005. Can any of the chemical products inside the carbon cleaner can create a problem to my engine in the future? Thanks for your time!
Thank you so much for the great video. I made the mistake of dumping fuel injector cleaner in the fuel tank which clogged one of the injectors..now I am getting CEL saying cylinder 3 is misfiring. Car stuttering at idle and happens only after engine warms up. All points to fuel injector. Used your method and emptied full can (about 350ml). It reduced the stuttering. Will there be any issue if i do it one or more cans? Appreciate any help.
Hi, you are really ingenious congratulations. Question: can this system to clean the injectors without disassembling them be used for a diesel? If you made a video for this system, can you give me the Link. Excuse my English but it is translated by Google, also because I follow you from Italy. Thanks and congratulations again.
I have a Rav4 with the same 2ar-fe engine but it doesn’t have easy access to the fuel pump like your Camry. Do you think I could follow this same procedure but route the fuel line to an empty jerry can so the fuel injectors run just on the cleaner? Or do you think that would cause problems and the fuel pump has to be disconnected?
Awesome, the earliest way to clean the injector.that I was looking for. However, can we do your way of cleaning it for a Chevy avalanche z71 2001 pick up truck? Thanks in advance for your response.
Yea, I guess you can, if one can didn't create enough pressure, you need two cans, make a diy Y connector to connect 2 cans to the fuel rail, if one can didn't start the car
@@AliMECH Thank you so much for a prompt reply and advice. I am not a mechanic and no experience at all but love to watch your video which is simple and details make me easy to understand. Thank you again.
Aliment, how do I pop the air cleaner box from that clip on the right hand side , any suggestions would be appreciated, my technical process in fixing cars is very limited. Thanks for your UA-cam channel. Larry
AliMech! 😊 Question: have you considered doing a video on “how effective” (or not effective) those “pour into the gas tank” types of fuel injector cleaners are? I’ve always wondered if those cleaners actually did anything.
Can I perform this fuel injectors cleaning a second time if the first time didn’t fix the misfire p0302? I already replaced the spark plugs and coils and the engine code is still there…
Thank brother for this video I did everything as you explain but I got engine check light i cleared by OBD but it’s coming again can you please tell me what I can do to delete the light thank you
Look like you didn't watch the whole video, I took it out and the car wont start, fuel pump fuse in Camry not only responsible for the fuel pump but also powering up the injectors, watch the whole video
Does the carb cleaner not affect the cylinder walls by removing the oil and possibly messing something up with the pistons cleaning the injectors this way ?
Hello Mr Ali Can you please help me for the problem i have confronted with . This is the story as below . I have 2006 scion , the car had a little hesitation, i clean throttle body by removing it replace the the screen seal , replace plugs , replace vavle cover gasket it was leaking oil around the plugs , then started fine , after i saw your video i did what ever you show how to clean the injector , but nothing was coming out ,i bought the pulse maker + cleaner , nothing was coming out , with no filter in the injector , i order filter , when i put all the injector on , car runs 1 minute , cuts off , engine light comes on , i check the cods , keep saying hesitation cyl# 4 , i install new Denso original ( 240 $ ) nothing changed .I love my little car it was working good , now i have order 4 igni coil , anyhow what you think it might went wrong . the battery was disconnected when i replace the injectors . i am going crazy . i will get the coils by friday jully 29 .today is jully 26
Ali can you help. I have R20A Honda engine. Fuel line is easy to access. Connected carb cleaner and rubber vacuum hose with jubilee clips on. Disconnected fuel pump fuse 9 and turned engine. After several attempts engine would not fire whilst spraying carb cleaner can. . Does fuse removal disconnect injector operation also? Any reasons why it won't start? With Fuse back in and fuel line reconnected and it starts first time. 🤷♂️
its ok, the can pressure didnt provide enough pressure to run the engine, even if it didn't run, carb cleaner still will get in the injectors and clean them, try with different can
@@AliMECH I am going to check my coils next to identity slight misfire at low speed. So far I have tried your valve cleaning, MAF and PCV valve cleaning. I may try heat shrink over the coils as they are now 97000 miles
Starter for camry was changed and worked for 2 day. The third the car started and the rpm moved erratically and the car cut off and would not restart. What should i do? Thx
Yea you can do that, but I wanted to show that the fuel pump wire harnesses disconnected with continuous shot, because some people already don't believe that
@@AliMECH those people are idiots, and they probably don’t work on their own cars or understand how they work -REALLY work. Or they’re from Toyota and are trying to protect their structure by spreading disinformation.
@@AliMECH Bro i did it :). My car was running about 20 sec on car cleaner can. The can wasnt full. After that i was drive my car 5 miles . I feel my car running better. Thanks bro
If you watch the video till the end, I showed, when I take the fuel pump fuse out, it cuts power even from ignition coils, so that's y I took the wire harnesses out,
Man, Very Good!!! Another one of your great videos!
Thanks man, appreciated 🙏🏻
@@AliMECH i am a philippines national watching from Saudi Arabia, your the best technician I have ever seen.
Thanks Rool, appreciate that 🙏🏻🙏🏻
@@AliMECH Mr. Ali Mech can you make also tutorial for a diesel engine cleaning injectors system. Thanks in advance rool...
Thanks, I will 🤜🤛
For folks who have never done this before: he’s removing air filter box etc just to access where the fuel line connects to fuel rail. If in your engine layout you can access that point without air filter box in the way, you can leave the air box alone. 😅
Great video!
Thank you! You just save me A LOT of time and money to complete a simple process.
I'm glad that my video was helpful ✌🙏🏻
Great video! Thank you for the detailed explanation on fuses. Can’t wait until I perform this on my car.
Thanks, good luck 🙏🏻✌
It was very helpfull and i am so happy that we have a high level car repairing videos as yours
Good luck
Thanks bro, that means alot 🙏🏻🙏🏻
One of the best videos I ever seen .your good. All the from Jamaica. Blessed love bro
I appreciate that
It does work! I just did it with my 2006 nissan frontier 4.0 was shaking when coming to a red light or full stop. Now my problem is gone.
Thats Awesome, great job
انشاالله
YOU get over 2 millions 👍👏🙌🙏👌🙌
Thanksss
Well done, as a professional automotive technician I really believe that all of this is gonna work, especially for Iraqis fuel which is extremely bad fuel
Yea man, thats the easiest way
Should block the return line so you don't just blow cleaner into the tank
It wont get back to fuel tank, bc carb cleaner can wont be able to provide that much pressure to pass return line valve
Probably removing the fuel pump fuse is much easier
Here is what he said 7:00
Not on Toyota engines
@@dragan3290 what does it mean??
The fuse for fuel pump protects the entire efi circuit. Removing it would disable the injectors.
I agree and understand on the fuse. But maybe try doing the fuel pump relay instead. I did it with no problems on my Jeep, but each car is different.
bro another mission impossible one, respect
Thanks bro 🙏🏻
I believe you because I followed exactly your instructions, the engine is much quieter after cleaning the injectors
That's awesome, thanks for your feedback
@@AliMECH what took auto mfg sk long for a access door to fuel pump.Old days had to drop tank.but id use a grinder and cut my own access door and patch with metal and rivet.
Veslee's carb cleaner has instructions for fuel-injection systems where you can spray half the can into half a fuel tank. No idea how effective it'll be but hopefully it helps with pistons too
i can tell you that the cleaner through the fuel tank may not work. in my case it didnt work. i have put 3 different sets of injectors on an old 1986 skyline and all jammed up doing it that way. i just found this man's videos. this is how i'll be fixing my problems without a doubt.
@@vsvnrg3263 One can always disassemble them and use the carb cleaner directly into the injector. Or, from months of extensive video consumption, just use premium diesel/gasoline from reputable companies once in a while. Cuz those things works wonders for the fueling-injection system.
I've stopped using regular diesel and went with V-Power only. That's for sure. Or you can go with halfsies (1/2 Premium; 1/2 Regular), for a more economic approach. Just don't mix them from different brands.
@@vsvnrg3263 so sure that this will fix your problem before you even try it..SMH
Great video brother!! God bless you!!
Thanks! You too!
this is one of the best video .ever see on utube👍👍👍👍
Appreciate that
Pretty good video, but just so it never gets to where u have to do this, I would just suggest getting high quality fuel in the car with injector cleaners added after every oil change.
Wow..cool and smart I watch some of your Toyota videos and I drive a Honda Accord v6 2016?
Glad you like them!
Works perfectly. Genius!
thanks for watching
This is where i draw the line in my engine skill 🫣
Well done. DiY part of a work might be tricky and quite difficult.
Great work with smart way... I like it... I will try it on my Suzuki-kei car.
Awesome, thanks
@@AliMECH do you have WhatsApp no, so i can send you images of pipes for confirmation
No, I dont use it
2:35, yeah, I didn't like taking the gasket of the fuel tank off.
What if you run a pipe from the engine fuel line and direct it to a bucket, so granted you will waste some fuel but it is way better than taking the gasket out of the fuel tank.
Then you can continue the other process as normal, maybe because the engine cannot maintain pressure, it may not allow you to do so?
Is there any other way? Tapping into the harness somewhere else? Disabling a relay while keeping the fuse in?
Verry helpfull
Thank's freind 👍👏👏👏
Thanks for watching
Thanks Ali for sharing this infomative car tips.
My pleasure, thanks for watching
Great video and expanation!
Glad you liked it!
Great video, and very clear process! Do you know if I can disconnect only the fuel pump fuse, not the harness, and still do this on a 2006 Lexus IS250?
Very nice video 👌
Thanks for watching
Oh, a washer you used to make the adapter. What type of glue did you use?
i love the video..i know it works..i already tried your method..looking forward for videos mate..
Thanks man, more coming
Hallo Ali l have a jaguar x-type 2005 diesel can l fo it same like you .(dikarim wek te çèbikim.)gelek Spaß
@@baronde7063 No, this method not for diesel engines, i recommend removing them and clean them out of the engine, i have videos about that, i will do some tests in the future videos to find a way for diesel engines as well
Hello..Anthony Martin Emergency Mobile Mechanic...Great tip...Buy Refirbished set fuel injectors..Mileage on fuel injectors plus ethanol percentages with fuel always factor....Star Tron Enzyme Fuel Treatment the best.....Take Care...
Awesome!! will this method work on my 1985 Toyota 4runner with the 22re engine?
Thanks, yes sure if it's gasoline
Hi AliMMECH I woul like to do this procedure on my Yaris 1.0 gasoline of 2005.
Can any of the chemical products inside the carbon cleaner can create a problem to my engine in the future?
Thanks for your time!
*Like !!!* saludos desde Sonora México
gracias por mirar 🙏🏻🙏🏻
Does it clean the o2 sensors? Is their any concern that it could damage anything? Otherwise this is amazing
Thank you so much for the great video. I made the mistake of dumping fuel injector cleaner in the fuel tank which clogged one of the injectors..now I am getting CEL saying cylinder 3 is misfiring. Car stuttering at idle and happens only after engine warms up. All points to fuel injector. Used your method and emptied full can (about 350ml). It reduced the stuttering. Will there be any issue if i do it one or more cans? Appreciate any help.
Good job man 🌹🌹🌹
Nice I was planning to buy non dismentale fuel injector cleaning device but I find this way much cheaper and easier 👍👍👍🌹🌹🌹
You welcome bro, thanks for turning in, yes this is the most effective and cheap way
@@AliMECH 👍👍👍
tried it?
Awesome!! How would yo do it on a GDI engine (2014 elantra gt in my case)?
Just remove fuel pump fuse and connect the carb cleaner to the fuel line if you don't need to remove the injectors
Do you have any videos on sorting out a blow by on a diesel SUV
Do you think that some cars might run by removing the fuel pump fuse or do they all shut off the injectors? Thank you
Hi thanks for sharing this will thos work on a toyota prius 2007 it has a pcv how do I do it for that car?
How to locate fuel pump relay on 2013 Corolla? The cover diagram is not clear.
Look at your cars manual book, fuse page section
I have a 2012 Honda Civic. Would it be better to remove the fuel relay fuse or just disconnect the fuel pump?
Hi, you are really ingenious congratulations. Question: can this system to clean the injectors without disassembling them be used for a diesel? If you made a video for this system, can you give me the Link. Excuse my English but it is translated by Google, also because I follow you from Italy.
Thanks and congratulations again.
No problem I understand you well, no, this method only for gasoline engines
This video is great , but wt if car ckeaner added direct inside the fuel tank ???
Thanks, Not a good idea, sometimes it will stops fuel pump
Thanks ...
Please, do this same video for Toyota Corolla 2013. Thanks
her bazhi dast xosh.I love it.
I have a Rav4 with the same 2ar-fe engine but it doesn’t have easy access to the fuel pump like your Camry. Do you think I could follow this same procedure but route the fuel line to an empty jerry can so the fuel injectors run just on the cleaner? Or do you think that would cause problems and the fuel pump has to be disconnected?
Hi, I have the same RAV4, how did you do it? I'm planning on doing this, maybe just removing the fuel pump fuse?
Great video!
Thanks
Awesome, the earliest way to clean the injector.that I was looking for. However, can we do your way of cleaning it for a Chevy avalanche z71 2001 pick up truck? Thanks in advance for your response.
Yea, I guess you can, if one can didn't create enough pressure, you need two cans, make a diy Y connector to connect 2 cans to the fuel rail, if one can didn't start the car
@@AliMECH Thank you so much for a prompt reply and advice. I am not a mechanic and no experience at all but love to watch your video which is simple and details make me easy to understand. Thank you again.
Thanks for watching 🙏🏻 glad I can help
Aliment, how do I pop the air cleaner box from that clip on the right hand side , any suggestions would be appreciated, my technical process in fixing cars is very limited. Thanks for your UA-cam channel. Larry
AliMech! 😊 Question: have you considered doing a video on “how effective” (or not effective) those “pour into the gas tank” types of fuel injector cleaners are?
I’ve always wondered if those cleaners actually did anything.
I can tell ya the expensive ones work but not cost effective as ya have to use can every other fillup
Can I perform this fuel injectors cleaning a second time if the first time didn’t fix the misfire p0302? I already replaced the spark plugs and coils and the engine code is still there…
Or you can take it out and clean them out of the engine, like I did here
ua-cam.com/video/aDvtzg-ThZs/v-deo.html
Hi Ali will this carb cleanerclear debris from the injector filters
No, I used to clean the filters when I didn't replace them
Thank brother for this video I did everything as you explain but I got engine check light i cleared by OBD but it’s coming again can you please tell me what I can do to delete the light
thank you
can you do this type of service in 2018 Toy Camry SE?
Man that’s awesome. ! Will it work on the 2014 Toyota Camry? And carb cleaner who would of known . Any type of carb cleaner? Thanks man
Yea man, it will work on 2014 too, yes any carb cleaner
I want to do it this but I know carb cleaner to be very aggressive. will it not eat away at the glue as I feed it into my engine?
Hello is this for diesel cars or only petrol.if is for diesel what is the best thing to purit in the injector
Does this same process work for TBI injection
Very good idea
Thanks
@@AliMECH you're the best mechanic ... I'm a philippines national watching from Jeddah ksa.
Thanks for your feedback 🙏🏻🙏🏻
Great video
Thanks for the visit
Look like you didn't watch the whole video, I took it out and the car wont start, fuel pump fuse in Camry not only responsible for the fuel pump but also powering up the injectors, watch the whole video
This is more effective and fast that driving 10k poor ideling car just for cleaning injectors
Does the carb cleaner not affect the cylinder walls by removing the oil and possibly messing something up with the pistons cleaning the injectors this way ?
I mean would gas does the same?
Hello , nice video! Does this work with diesel cars?
Thanks, No
Great video! What size black hose did you use? I'm doing this on a 1997 Toyota Camry.
Thanks, I used 8mm hose
Exellent!
Thanks
where in the world you got that long straw for spray can?
It came with seafoam can
Hi. Will this method work on a corolla with a port fuel injection system?
Hi. Can I do this on my ecotec V6 holden Commodore 2002 model? And do I pull fuel injection fuses and relay?
Can you clean knock sensor without removing them in a 2000 Lexus es300
knock sensors don't need to be cleaned, they're basically a very tuned microphone. When they fail, you have to replace them.
Hello Mr Ali
Can you please help me for the problem i have confronted with .
This is the story as below .
I have 2006 scion , the car had a little hesitation, i clean throttle body by removing it replace the the screen seal , replace plugs , replace vavle cover gasket it was leaking oil around the plugs , then started fine , after i saw your video i did what ever you show how to clean the injector , but nothing was coming out ,i bought the pulse maker + cleaner , nothing was coming out , with no filter in the injector , i order filter , when i put all the injector on , car runs 1 minute , cuts off , engine light comes on , i check the cods , keep saying hesitation cyl# 4 , i install new Denso original ( 240 $ ) nothing changed .I love my little car it was working good , now i have order 4 igni coil , anyhow what you think it might went wrong . the battery was disconnected when i replace the injectors . i am going crazy . i will get the coils by friday jully 29 .today is jully 26
good video
Thanks for watching
hello thanks for this video i have a question what’s the name of the orange part steering i want to buy it thanks
If you mean the paddle shifters, I designed them and 3d printed
@@AliMECH yes paddle shift thanks ❤️🔥
I made them long time ago ua-cam.com/video/LrGQQyDTB_M/v-deo.html
@@AliMECH that’s cool but haven’t this machine i want to order this paddle shift by alixpress but i don’t know names this product thanks for you ❤️🔥
Awesome man,yes you can find them on aliexpress
That method will work for diesel engine?
excellent. thank you
You welcome 🙏🏻
Any video for Tsi 1.4 ? Thanks
Not really for now
@@AliMECH thanks
Anytime
Id run at least 2 cans through this ! LOL😆
Hi guy could u show video how to clean today turbo charger fuel injector car ? More people would await to see.
Can this work on a Kia Forte 2017 model??? Help me.
The engine light won't be on cuz I need my fuel injectors cleaned and I also have a 2017 camry
The carb cleaner could eat away at the o rings flooding the injectors under pressure for too long then you got air leak problems
what brand is your blue tool set??
Ali can you help. I have R20A Honda engine. Fuel line is easy to access. Connected carb cleaner and rubber vacuum hose with jubilee clips on. Disconnected fuel pump fuse 9 and turned engine. After several attempts engine would not fire whilst spraying carb cleaner can. . Does fuse removal disconnect injector operation also? Any reasons why it won't start? With Fuse back in and fuel line reconnected and it starts first time. 🤷♂️
its ok, the can pressure didnt provide enough pressure to run the engine, even if it didn't run, carb cleaner still will get in the injectors and clean them, try with different can
@@AliMECH I am going to check my coils next to identity slight misfire at low speed. So far I have tried your valve cleaning, MAF and PCV valve cleaning. I may try heat shrink over the coils as they are now 97000 miles
@alimech hey bro do you have any video doing the same fuel injector cleaning process but in a Acura MDX or any Honda engine
No i dont have, but the prosses will be the same, but i will do that if i find one
@alimech thanks bro for the response. Another question what’s the brand of carb cleaner you used in the video ?
@@hanselldisla4643 Most of times i use ABRO, but all work the same
Wouldn’t BG44k be a lot easier to do? Good job 👏 though!
How the engine running??? as u switched off the fuel pump is carb cleaner is flammable like fuel??
It burns just like fuel
Thanks bro..
Can i just plug the line with something instead of unplug the connector at the pump?
No, the pressure is high, if you plug it, it will damage fuel pump or blow a fuel line
@@AliMECH im just gonna run the line to a gas container then. The connector on my car fairly hard to reach
It is possible to remove the fuel pump fuse as well
Yes, but not with camry, I tried to remove the fues, but the engine didn't start, I think it power some other electric too
@@AliMECH yes it use a fuel pump control module
Do you need to take any fuses, or relays???
👉7:00
Does it also clean o2 sensors?
Starter for camry was changed and worked for 2 day. The third the car started and the rpm moved erratically and the car cut off and would not restart. What should i do? Thx
I want to clean my toyota tazz fuel injectors
Can this be done on Mercedes-Benz W203 2004 c240?
Yes you can
Is there not a fuel pump relay to pull?the fuel pump is probably the only component connected to it, if there is
Yea you can do that, but I wanted to show that the fuel pump wire harnesses disconnected with continuous shot, because some people already don't believe that
@@AliMECH those people are idiots, and they probably don’t work on their own cars or understand how they work -REALLY work. Or they’re from Toyota and are trying to protect their structure by spreading disinformation.
Do your car have return flue line? I have on my mk4 vw, on fuel rail i get feed fuel line and also return flue line. Iam concern about that?!
Mine doesn't have return line, even if you have return line, carb cleaner can wont be able to open it and get back to fuel tank
@@AliMECH Bro i did it :). My car was running about 20 sec on car cleaner can. The can wasnt full. After that i was drive my car 5 miles . I feel my car running better. Thanks bro
That's awesome , thanks for your feedback
Take out the fuel pump fuse in the fuse box do the job?
If you watch the video till the end, I showed, when I take the fuel pump fuse out, it cuts power even from ignition coils, so that's y I took the wire harnesses out,
@@AliMECH 🤣 when you show the tools what need i end waching, thanks the response 👍
@@PoloHungary lol yea, looked easy
Isn't it better to use a fuel injector cleaner additive to put in the fuel tank instead
Does it work on diesel engine
injectors?
No
How do I depressurize the fuel line so I can disconnect it without the fuel going everywhere?
Remove fuel pump wire harness or fues and try to start the engine, it will depressurize the line
How can we securely disconnect the fuel line and reconnect this is a pressurized system so pls HELP
Can you made the hose adapter and sell it on eBay so people can buy and do it at home .
That's a good idea, its easy to make
@@AliMECH Some people just don’t have the tool and skill to make that hose adapter, just try to do it and sell it .
Awesome man, thanks
If you can't make this simple adapter then you shouldn't mess around under the hood at all. You'll hurt yourself or burn down the car )