Mirror Sequential Turn Signal DRL Install on a Subaru STI
Вставка
- Опубліковано 2 жов 2024
- Blinkers: amzn.to/3SlaIQT
Product Links!
Instagram: @chrisvuono
Obsessed Garage: bit.ly/2LtofVq
Car Wash Stuff:
Jescar Powerlock: amzn.to/2Pwg2Tx
Collinite 845: amzn.to/2ooGN18
Adams Wheel Cleaner: amzn.to/2nMxjwq
Adams Rubber and Tire Cleaner: amzn.to/2ozJhdp
Adams Car Wash Soap: amzn.to/2pkzqIi
Adams Window Cleaner: amzn.to/2MLwlZE
Adams Interior Cleaner: amzn.to/2MieCtZ
Adams VRT: amzn.to/3PJ9ZaH
Adams Tire Applicator: amzn.to/2piasJz
Koch Chemie GSF: amzn.to/3vAyi1r
P&S Beadmaker: amzn.to/2VHLFuJ
P&S Interior Cleaner: amzn.to/2WLpgOH
P&S Brake Buster (wheel cleaner): amzn.to/3mlAqDV
Sonax Alcantara Cleaner: amzn.to/2VDrkaT
EZ Detail Brush: amzn.to/2Bedq4t
Tuff Shine Brush: amzn.to/2Mh3VYz
Lug Nut/Brake Brush: amzn.to/2MLx0u6
Adams Buckets: amzn.to/35C42Wo
MTM M407 PW Gun: amzn.to/35CXZkv
MTM PF22 Foam Canon: amzn.to/3JegyyV
Clear Spray Bottles: amzn.to/3d1y34L
Maxshine M21 Polisher: amzn.to/3BnV0Pb
Polishing Pads: amzn.to/2Y4d2kj
Dramm Hose Valve: amzn.to/2VbqnGO
Hose Quick Disconnects: amzn.to/3hQFnn8
Gtechniq CSl and Exo: amzn.to/2QdfCkp
Applicators pads: amzn.to/3bPJoHX
Applicator: amzn.to/3bXhr0L
Car Stuff:
Bosch icon 26a Wiper: amzn.to/3bGn2pR
Bosch icon 16a Wiper: amzn.to/2OSuuEf
Perrin Reverse Lockout: amzn.to/2wNuqiZ
Perrin Radiator Shroud: amzn.to/2TkLC75
Perrin Boost Control Cover: amzn.to/2T27vcz
Perrin Belt Cover: amzn.to/3adXVsX
Perrin Strut Bar: amzn.to/2Vun5PB
Perrin Battery Tie Down: amzn.to/32ulc7h
Perrin Brake Master Cylinder Reservoir Cover: amzn.to/2I09HLd
Kartboy Short Shifter: amzn.to/3biabPc
Kicker speakers: amzn.to/2ys26UI
Kicker tweeters: amzn.to/2WQ6WEu
Kicker subwoofer: amzn.to/2A2KGOI
Idoing headunit: s.click.aliexp...
Carlinkit CarPlay (wireless carplay): s.click.aliexp...
Turbosmart Kompact bpv: ebay.us/13Dys1
F1 Fog Light: amzn.to/3hewSC8
2015-2017 Front lip: ebay.to/2Vk2BYO
2018-2020 Front lip: ebay.to/37mHeeZ
Side Skirts: ebay.to/3qktHwY
Rear Spats: ebay.to/3odfCQh
Carbon creations diffuser: ebay.us/xWXwYS
Carbon spats: ebay.us/VKyo0O
Carbon Fiber Front Lip: ebay.us/Mkbayl
Carbon Fiber Side Skirts: ebay.us/xXp6s2
Uniden R7: amzn.to/325E9yg
Uniden DFR7 Radar: amzn.to/2UDCz3a
Mirror Mount and Mirror Tap: amzn.to/2UFT9iQ
Garage Stuff:
Husky Work Bench: amzn.to/2PwxJSp
Cabinets (black): amzn.to/3cfGfir
What I use to dry my car: amzn.to/2uzSVj0
LED Lighting: amzn.to/2Te9HfK
Pressure Washer: amzn.to/346sdOe
Edifier R1850DB Speakers: amzn.to/3cOD9RI
Polk PSW10 Sub: amzn.to/2XfiXDT
Wera Screwdriver: amzn.to/2YFw5mT
LED Hood Light: amzn.to/3z40afZ
Camera Gear:
Sony ZV1: amzn.to/3Mz2B0w
Deity Mic: amzn.to/3CrT1ri
Cage: amzn.to/35EPSso
Wide Angle Lens: amzn.to/3CtKKn4
Thanks for the video. Just got mine done and really like them. I also did the JDM bezels w/aftermarket DRLs so these match up well. Have no issue with the wire tap and I appreciate your delineating that for us. Also no need to remove the mirror glass. An 11" zip tie was easily inserted through the grommet, conduit and housing and then with the wire taped to it, pulled it back thru. For an oem look I covered the white wire with 1/8" flex conduit as well. Thanks again.
This video is awesome! Thank you so much. My auto windows also went out. But I read through the comments and was able to reset it by putting the window down and hold down the button. Thank you so much
I actually have a full video on this process ua-cam.com/video/hXEz1NSifpU/v-deo.html
Blue/yellow wire for driver’s side and Green/black wire for passenger side
Very cool! And love the tip on rattles 👍🏻😎
this video is very helpful i been wanting to do this on my 2016 wrx for two years now i hope my colors wires are the same as your sti lol
They should be! Glad to have helped.
They were the same for my 2012 Impreza.
Omg!!! Thank god for you sir!! Ive had these on my car and hooked up as indicators only for the past year and hadnt found a clear video showing which wire to tap into .I knew the door panel had to taken off and the wire run through down the mirror but what wires tapped into for power never shown so thank you! I will do this twomorw! Legend!
Glad to have helped! I too had trouble finding a clear video or direction on how to wire them up. Decided to figure it out for myself and make the video for people like me and you. Let me know if you have any questions.
Watched from start to end. Amazing video bud, you just answered a lot of questions. Hopefully I can get it done next month once I get my vacations approved.
Glad I could help! Always like hearing these comments the best. That is what I make the videos for. Thanks for the support!
The lights work great! Thanks for the tutorial. However, my driver side window doesn’t work with auto, matter in fact it doesn’t roll all the way down. It only rolls half way then fully stops. Any help here?
ua-cam.com/video/hXEz1NSifpU/v-deo.htmlsi=nL0GogrLr6keJRf0
Ordered mine on amazon and the driver side doesn't come on.
I have a 19 WRX base, is there a lead wire/plug in the mirror from the factory to plug the turn signal into? Or did the turn signal come with a wire/plug to run?
base and premium wrx's did not come with the turn signals in the mirrors. You will need to purchase the wire harness kit to get them to work properly. I do not believe it is already ran into the mirror.
@@Scoobyfreak86 I figured as much. Guess I can always take off the mirror cap and look to be sure. Thanks!
Hello! Great vid. How did you get the mirror plate off? I’m struggling to unclip it...
The best way to do it is push the mirror all the way up. Then you can get your fingers underneath and pull up and out.
Looks clean man I like the idea of them being DRLs. Definitely a good addition to the car
What was the part you used to tap wire into door panel connecter. You showed it at 4:11 time
amzn.to/3zWjPmD
Great video! Thanks for showing all the steps and the tips!
What wire on the passenger side?
Edit: The passenger side on a 2018 WRX is the green/black wire on the larger of the two harnesses. It's two wires over from the black ground wire. The driver side is the same wire as shown in this video!
Thank you for this video. you saved a bunch of people. I have a question too, since you run 265s for your tyres, will it hurt the diff if you run 285s?
No need to run 285 on these cars with relatively stock power. Too much tire. 265 is the biggest I would go.
Scoobyfreak86 with a widebody then it would be more so necessary instead?
Car should’ve come like this from factory vs led + diffuser. This mod will come after car is protuned.
Awesome video, and thank you for the step-by-step instruction. I have a 2017 WRX premium, and It didn't originally have the turn signal option. I bought the turn signals from your link and purchased all the other necessary parts but I don't have the wire harness the turn signal plugs into. Any suggestions on where I can find it?
You can pick them up from Subaru or buy OEM STI mirrors.
Were you able to get this working and have the part number for the harness?
@@xil3ntkha0s I wasn’t able to get everything working b/c I didn’t have the harness. In retro spec if I could have examined someone’s harness I could have made a simple one. I ended up buying the package from subi speed and used the turn signals from the Amazon link. I hope this make sense and was helpful.
@@kdvibez7781 thanks bro you a real one ✌️
How to install a switch to turn them on and off when ever you please?
You would need to wire it independently than tapping into wires.
Are these gonna work on 2018 forester base model too?do they have they same wirings?
Thanks for the video it help me a lot keep up the good work I appreciate it bud.
I have the white wire also have a black wire where does the black wire go?
Wired mine up a few days ago, ran the DRL wire to an add a fuse and what a pain in the butt! Getting the wire through the door grommets sucked but I didn't want to tap into the wires. Great detailed video tho!! I think they make the car look amazing especially at night.
What color do I tap in on the passenger side? I don’t see the same colored wires there
Where did you purchase the full carbon fiiber mirror replacement all I can ever find is the carbon fiber shells
www.subispeed.com/part/15wrxmir-cfa-carbon-reproductions-full-replacement-mirror-cover-with-turn-signal-cutout-15-wrx-sti#.X1ZcjCVq0lQ
Thank you! love your videos.
I have installed this on my 21 STI limited. The passenger side light stays on even after I locked the doors. Any idea why it's happening?
Hm wondering if you tapped into a wrong wire.
Where did buy the carbonfiber side mirror??
They are from carbon reproduction.
Hi,
I'm from Australia and my car is obviously a right hand drive. On my passenger side, I don't have a green / black wire on my harness ? Would you be able to help me ? I can show you some photos of my harness, but can't upload any on here.
Thanks
Hi Jeremy. Unfortunately, I am not familiar with the colors on a non us spec car. My guess it’s the driver side colors I mentioned as they are just swapped over.
What’s the wire to tap in on the passenger door? There’s no yellow and green
@ 2:59 pause! Is that a small dent on the upper half of the door?
No sir. Just a reflection.
@@Scoobyfreak86 Look carefully at 23:57 it's a small indentation on your door.
Thanks for the color code! It’s still the same on the 2021 👍
Just completed the install... and it looks nice. On problem though - when it come to the push to start, when you press the start once, only the driver side drl come on, when you press twice, bith of them come on... not sure if it's only me🤔
Hmm that is strange. Did you connect it to the correct wire? As long as they both turn on when the car is on then that’s fine. But both should come on either way.
@@Scoobyfreak86yeah, correct wires all the way. Part of me prefers that they come on when I put the car into accessory mode
@@Scoobyfreak86 i think I know what the issue is, on the driver side, the wire we are tapping into is the power to the mirrors folding and unfolding, which gets power when you hit the switch once.
A different wire should be used in my opinion, which I would need to investigate
@@-ink.-3948 did you find out white wire to tap?
@@josephhernandez4757 bought a multimeter about a week ago... will be testing soon and give some feedback 🙂
@Scoobyfreak, Hey Brother, hopefully everything is good. I had finally some free time to install the sequential turn signal lights. But I ran into an issue with the wiring. I tapped that yellow with blue wire and the DRL function turned on, but all my other accessories ( Power lock/window) stopped working. Is there any other wire I can tap without loosing the accessories or getting into the fuse box? Thanks!
Did you plug everything back in? If so, check all the wires Incase you split a wire. You may need to reset your auto windows since they were unplugged. I just posted a video on how to do this as well.
How have these lights held up? Any fading or burned out LEDs? Just curious if you would do it again. Thanks brother.
Still working and looking as good as new!
hey just did mines it was workin fine now when i put the key to off position to like just listen to the radio the driver side mirror stays on how wierd is this
They should both turn off once the key comes out. If the window switch lights are on, the mirror lights will be on.
Scoobyfreak86 yea it was workin good once the key comes out yea they turn off and and once the key is to on positive before you start the car the light are on but when you turn it off and like listening to the radio the passenger turns off and the driver stays on
@@wil_wrx did you figure it out? I'm having the same issue but opposite man. Mines the passenger door light wont turn off.
@@SuperNoe132 Having the same issue. Did you find a solution?
@@Anthony-kx5ls yes bro I did. It turns out I was trying to splice the wrong cable lmfao. Take a look at the color of the cable you wanna splice really closely. Two cables look almost the same color. I forget the color but I know he mentions it in the vid. It didn't help I was working on it at night. I gave up and the next morning I gave it another go in daylight and found out the cable I was trying to splice was the wrong color. It had power even when the car was off. I spliced the other cable which looked very similar color and it worked. When I turn off my car the lights turn off in the mirror signals
Thank you for this video. I did not want to run the wire to the fuse box.
Great content..next install jdm puddle lights pls? Didnt understand subispeed installs from passenger side to driver side..hopefully u can clear that up
I think I’m done with the mirror mods haha. But who knows!
Thanks and great content.. what is the green/black wire on the passenger side and the yellow/blue wire on the driver's side power that you tap into? Thanks again
It is the power to the window switch lights.
question my driver’s side DRL comes on when i turn key once then i turn it on battery mode the passenger drl comes on??
Check the wiring and make sure you tapped into the correct power source
@@Scoobyfreak86 yes tapped into the yellow/blue wire for driver’s side
I have a 18 WRX, followed your whole
Video for the drivers side but my passenger side doesn’t have a green wire with a black line, I’ve got a red wire with black line, is that the one to tap into?
Hm that is strange. Subaru is known for changing up plugs/wires all the time. I’m not entirely sure, but I would give it a try. If you have a wire tester handy, that will help narrow down which one you need. I would give the red/black one a shot and see what happens.
@@Scoobyfreak86 Update, I had to unravel the electrical tape to find the proper wire, everything worked out. Thank you for your video helped SO much!! Only having one issue now, my passenger window won’t go down from the drivers side but works from the passenger side
Watch this video and you’ll be set ua-cam.com/video/hXEz1NSifpU/v-deo.html
@@Scoobyfreak86 My god I actually love you! I was so scared I would have to take the door panel off and figure out what’s wrong!! Thank you soo soo muchh!!!! Merry Christmas and Happy New Year!🎄🎊
Installed mine on my sti today thanks to your video and showing where to tap into , I wasn’t going to do it myself until I watched thanks .
Glad to have helped!
Hey scoobyfreak! So I had my mechanic do the wire tapping (I didn’t trust myself) and now my passenger side window rolls down, but when I go to roll it up, it rolls up like an inch at a time. Also, my driver side master switch for the passenger window isn’t working at all. Do you know of anyone who might have had this issue?
I’ve tried the window reset but that doesn’t work. I’ve also disconnected the battery, reconnected and tried the reset again. Unfortunately, they didn’t work either. Any suggestions?
Are you sure you are re-calibrating correctly? Follow my tutorial. The windows have to be re-calibrated.
ua-cam.com/video/hXEz1NSifpU/v-deo.html
Scoobyfreak86 I have tried every method, including your tutorial, for the reset. I’m wondering if it’s a CAN bus problem, or maybe my mechanic tapped the wrong wire.
I’m having the same issue plus one bigger issue.. the door not opening from the inside
Did you figure this out??
Love the video, hey what type of rims are those on the subi?
Thank you! The wheels in this video are Enkei RS05rr's
Nice video, if I dont want to run DRL, but night time running light, are there any wire I can tap with?
You’ll have to find a wire that only turns on with the headlights.
@@Scoobyfreak86 do you have any idea which wire is available inside the door panel?
are these all white or do they have a hint of blue like my morimoto c lights?
They are pure white
What wheels do you want to get?
I needed this. Thank you
Are the wire colors the same in the door panel in a WRX?
I haven’t looked in the wrx, but it should be similar.
@@Scoobyfreak86 Alright I'll check it out. I'm thinking about installing the DRL function this weekend.
Hey man any chance I could add you on Facebook?
I don’t use Facebook
Bro I have a question the day light on the mirror stay on in the night.?
Yes it’s always on anytime the car is on
Thank you so much I’m install it and look very nice in the night.
Is it legal to run them at night ?
What if you only want the led when the engine starts up?
Or better much what if you only want the led feature only when you turn on the headlights?
What if you don't want the led lights on when the car is idle?
You’ll have to tap into another wire that supplies power only when the headlights are on.
what coilover and u running
ua-cam.com/video/GyE1nGM7ZgY/v-deo.html
Where did you purchase the lights
amzn.to/38eyZCn
Thank you
Did you lose your automatic up for your driver window?
You need to reset it. Put the window all the way down and hold the button down. You will hear a small click. Once that happens, your auto windows will be recalibrated.
Awesome thank you
Your video really helped alot. I appreciate all the time you took to make it easy for the rest of us.
I’m glad to have helped. This is the main reason I make them!
Thank you, did this mod with you as my guide.
Glad I could help!