The Spydernox Minichamp Plus
Вставка
- Опубліковано 25 сер 2024
- A hybrid combination of a Victorinox Minichamp, a Wenger Pocket Tool Chest, and a Spyderco Honeybee.
You can find more of my work on instagram here:
/ fit2survive_
Or on my website:
www.f2scustoms.com
Check out my friend, Marco, who inspired many of my mods here:
/ edcwolfs
Here is a list of items used in this video that can be found on Amazon.
Victorinox Minichamp: amzn.to/2LCjvkf
Spyderco Honeybee: amzn.to/2NiFw86
G10 liners: amzn.to/3isZCrI
Brass Rods for reassembly: amzn.to/38Yh704
Ferric Chloride (for acid etching): amzn.to/39MbMYH
Thin Blue Line gun cleaning mat amzn.to/3oZJ1hI
That is truly an amazing tool you produced there, you're creativeness and skills are next level!
Thank you! I appreciate it!
Love how you did your intro. Nice work on the knife and the editing.
Thanks Ben! Video editing is not my favorite thing to do. 😝
Some great ideas, thanks to your friends that gave you some help with the ideas. Great job.
I have no idea what you should do next but am excited to see what it will be.
Keep up the great work.
Thank you! I appreciate that.
Spydernox! Brilliant!
Thank you!
Just gorgeous..every of your project has it's own characteristics 💪👏
Thanks. 👍🏻👍🏻
great mod man! Looks awesome. The pen detail is great. For the next one I would like to see: Spyderco blade, microSD from wenger, Philips combo, Scissors and file with SD. (I thing the micro SD is a good enough nail cleaner). Great videos, keep them coming!
Thank you! Glad you liked it.
Thanks for your input for the next mod.
next level tinkering
:D Thanks!
Wow bud that is awesome work!! Tx tool crib sent me
Thank you! That was very nice of Ben!
That's truly an amazing looking multi tool. You gotta have some great tinkering and patience to do this stuff lol.
Thanks a bunch. It does take quite a bit of patience. 😅👍🏻
You are an artist. So cool...
Thank you!
My ideal SAK would be the Alox Classic SD but in 93mm. So Alox scales with knife blade, scissors and nail file. That's all I need on an every day tool.
That'd be pretty cool. 👍🏻
I say without any doubt that you're videos are the best! Beautiful knife and amazing job!
Wow! Very nice of you! Thank you so much!
I just love the way you make the Swiss Army knife look so nice 😊
Thank you!
Excelent performance, really all you work Is brillant. Congratulation. Since Buenos Aires . Regards.
Thank you! I appreciate it.
Well done. Im new here, Im really into victorinoxs (the really small ones though I carry a swisschamp in my backpack) and I really love what you do with it.
Im in a point in my life that I dont have any patience for new projects (Im deep into my cars) so I cant see myself drilling a spiderco and the sak itself and having those pins and hammer them ohhh seems too much work now so its fun watching it at least :) keep it up!
Thank you! Glad that you are enjoying my work! 👍🏻👍🏻👍🏻
Probably too late, but I would love to see you put a deep blue shipwreck patina on those copper scales.
I actually have a set of copper scales like these with a blue patina.
The hook blade you’ve referenced in a couple of your vids is actually an orange peeler and the hook that goes in the middle of the handle when open is a parcel hook, just an fyi excellent work on the customs
You are correct. 👍🏻 I should probably start calling it that.
Thanks for sharing, really appreciate seeing how these mods are done,
You are welcome. Glad you enjoyed it.
Very cool mod
Thank you.
Wow awesome!!!! Such incredible skills!
Thank you!
Awsome. I love seeing my ideas come to life
Thanks bro!
Man, absolutely ingenious. I would love to buy one, but it probably takes a couple of decades to make one, and it's probably illegal to sell modded combo tools from spyderco and victorinox lol.
Thank you! This one is actually for sale. It does take quite a while to make it, simply because there's several knives to disassemble, modify, and reassemble.
It's not illegal to sell them, the only thing is the warranties will all be voided. 😂 I have sent custom Swiss Army Knives to Poland, the Philippines, and the US without any trouble.
That looks sick
Thanks!
Why do you not have more subscribers!! This is art! This is genius! Love it. Someday I'll also a custom crazy one.
Good job there mate, awesome awesome work. I'm also gonna tell TX Tool Crib to check out your channel. Kudos
Edit
Oh just saw you the one who made his custom😅
Not sure... 😋 Working on getting more subscribers. Thanks for the support! That's funny about TX Tool Crib. 😝
Great work, would you please load a video on how you made the saw?
Thanks. Yes, I will record that and upload it.
More beautiful than original ,but I think it’s wicker in general. Etching and stone wash plus brass and g10 instead of steel makes it less durable.
Thank you!
The acid etching creates a light crystalic layer on the surface of the steel which does not compromise the strength of the steel. This acid etched finish could be polished back off without much effort.
The original liners are not steel but aluminum. So the G10 liners will actually be more durable and will have more longevity than the original aluminum liners.
And the titanium scales will last ages longer than the original plastic scales. 😉
Awesome! Take the victorinox nail clipp and customize it. Do two customized ones. One with a spiderco blade or try to add a böker plus mini tech tool and then one where you add a nail clipp to a bigger bladed victorinox like cybertool.
I am working on adding a nail clipper to the Minichamp, but the metal on the clippers is insanely hard. I can't drill through it. 🤣
@@FittoSurvive can't wait to see it! Hope you can get hold of a laser cutter or water jet to get through the material.
@@CoolaOK That's a interesting idea, I may try that.
Wow, I have no words
Thank you!
Good job man, nice knife, you have easy more patience than me.
Thank you! 😅 It does require a lot of patience...
thats so cool!
Thank you!
Very impressive. Look forward to more videos
Thank you!
Very cool
Thank you!
Wow!
Thank you!
Awesome mod !
Thank you!
แผ่นสีน้ำเงินมีชื่อว่าอะไรครับ
Looks great 👌🏻
Thank you!
Beautifull knife amazing job
Thank you
Wow love it!
Awesome! Glad you enjoyed it.
I can’t seem to find the wenger type sak you mentioned using anywhere online or any knife with that type of mini screw driver. Do you have any more details about it or where to find it? I would love to try and make a knife like this one. Yours looks very nice.
Here's one on Ebay. They are discontinued, so you have to search for used ones.
www.ebay.com/itm/145190558113?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=vfFX-uV_Riq&sssrc=4429486&ssuid=Ssu4KOABQoi&var=&widget_ver=artemis&media=COPY
Badass
Who makes those scales. Im having a lot of trouble finding custom 58mm scales that still accomadate the sliding pen
These particular scales were made in China. They can be found on Aliexpress.
It’s amazing!. Love to buy one if it is available.
Thank you!
Check out my website for information on how to order one.
www.f2scustoms.com
@@FittoSurvive I did and sent you an email😁
Very cool 👍
Where can i find this scales?
These scales can be found on Aliexpress or in Etsy sometimes.
Nice video!!! Would a spyderco bug blade fit in an SD? What about using a larger spyderco blade for a cadet??
The Victorinox Minichamp and SD are both 58mm. So the smaller Spyderco Bug is going to look too small even in the SD.
Yes, you can find larger Spyderco blades to fit larger Victorinox knives. I put a Spyderco Byrd in a 91mm Victorinox. I plan to upload that video soon.
@@FittoSurvive Can't wait to see Spyderco blade on 91mm SAK.
@@michkanm I have made a couple. I haven't posted them to UA-cam, but they are on my Instagram account. instagram.com/fit2survive_/
Looks amazing what would something like that cost?
Thank you. This is one of my more expensive builds, it costs $250 that includes FedEx shipping.
Fantastic 👍
Thanks!
I’m trying to make my own spydernox and I can’t seem to get my stainless steel to the same darkness that is shown in the video. I’m using the acid linked in the description but after ten minutes in the bath the steel won’t get any darker than gray. How did you get it so dark?
Try heating up the acid in a hot water bath. I hold it in the acid for 2 minutes, then I clean it with an old toothbrush under running water, and then put it back in the acid for another 2 minutes.
Super!
Thank you!
How much it cost for a custom victorinox that has spyder blade, cybertool screwdriver, scissor and a victorinox basic blade ?
Between $400 - $450 depending on the scales.
Where did you get scales that accommodate the slide out pen? And can you get scales for the midnite MiniChamp and still keep the led light and slide out pen. Great video btw love your custom projects
I found those scales on Aliexpress.
I have not seen titanium scales with with the LED light.
Thanks! Glad to hear that you are enjoying enjoying my work.
With the spyderco honeybee, where the pivot hole is just a bit bigger, will that mess anything up or does it need to have a spacer made to step the hole down?
Yes, you will need to peen in a spacer to downsize the pivot bore to 1.6mm.
Awesome I surely appreciate the help! Love the channel keep ur the awesome work!
@@thedoghouseoutdoors4116 You are welcome!
Love what your doing! I have a question, I have most of the tools to be able to try and modify my own swiss army knives.. I am wondering though, where are you getting the brass pins/ longer rods from? What size is needed for mini and what size is needed to do the 91mm style SAKS? Also, I know there are numerous places selling metal scales, but where are you getting yours from? Etsy?
Also, are you reusing the little brass "donut" nubs that are on the scale ends? Like the part the scales snap into? If not, where can I get those? Another thing, for g10, what size g10 for spacers? Sorry about all the questions, i just want to make a few for myself! 🙏🙏🙏
I included an Amazon link in the description for the brass rods, they fit perfectly. 91mm SAKs need 2.5mm rods and 2.2mm rods. Etsy and Ebay are the best places to buy scales, but if you can wait a month or two Aliexpress also has several options. It is critical to not damage the "donut washers" as they have to be reused or scavenged from another donor SAK. The G10 is 1mm thick.
Hope that helps! 😁
@@FittoSurvive thank you!!! That helps with everything I wondered about! Awesome! Looks like I'm going to order those supplies!!
@@markmaherr You are welcome!
Definitely getting nose bleeds with that coke spoon now
………………I want one so badly
Check out my website www.f2scustoms.com
Would it be possible to contact you and discuss a possible order for later this year?
Hey, I received your email. I will get back to you soon. My current waiting list is about 43 weeks at the moment.
Which wenger did you use mate.
Big fan of your work.
I used the Wenger Pocket Tool Chest. It's a discontinued model and kind of difficult to find.
Do you sell these because I really want one
Check out my website for information on how to order one. www.f2scustoms.com
is it possible to purchase one from you
Yes sir. Check out my website. There you will find information about what I do, and how to order a custom knife.
F2scustoms.com
Wher i can buy 1?????
Message me on Instagram. instagram.com/fit2survive_/
Do you sell any of your art? Because that's what it is! I love it and would love to support it.
Hey! I do sell custom Swiss Army Knives. Check out my website for details.
www.f2scustoms.com
excellent work! What acid do you use to give the tools that black color?
Ferric Chloride amzn.to/3dSKL9G
@@FittoSurvive How long do the pieces leave in the acid?
@@suizas.y.mas.suizas 90 seconds, then I rinsed the parts in water and scrubbed them with a tooth brush. Then I put it back in the acid for another 90 seconds and rinse and scrub them again.
@@suizas.y.mas.suizas Watch this video, here you can see the process better. ua-cam.com/video/jWlb8Ff2Sys/v-deo.html
Do you have an Etsy store?
Hey! I do not. Working on a website but for now you can contact me through my Instagram account (the link is in the description) if you don't have Instagram, I can send you my email address.
I read you sell that wonderful works?
This particular one is already sold. But I do make and sell custom Swiss Army Knives. 👍🏻
I will stay tuned
What acid is etched in?
Ferric chloride
Thank you!
What proportion should be mixed with water and in how many degrees of water?
@@sandorboruga4509 If the Ferric Chloride is dry then you should follow the instructions on the container. The acid I used needed to be added to water 1:5. I warm the acid in hot water bath. No particular temperature.
@@FittoSurvive Thank you very much🙏
Thank you for the video! now I will not rest until I do the same. 😉
Awesome! Let me know how it turns out!
@@FittoSurvive Hello! Can you help me? The blade from Spayderco is thicker than a nail file. How did you solve this problem?🤔
@@CruelD0G I sanded the Spyderco blade down to match the size of the Victorinox tools. I started with a diamond disk grinder, then sanded by hand till it was smooth.
@@FittoSurvive Thanks! I knew there was a catch somewhere 😉
@@CruelD0G You are welcome
I just discovered your channel and its amazing and inspiring. Do you just peen over the brass rods used for pins?
Awesome! Glad that you found my channel.
Yes, I peen the brass pins to shut the knife.
Wow, I would pay $100 or more for this tool
A knife like this actually costs around $320. 😬
dang i want one haha
😝 Check out my website. www.f2scustoms.com
Nice video but consider changing your cutting mat. No need to get political my friend, I'm just trying to watch someone make a knife!
Thank you. Not trying to make a statement or push my opinions. It is just my work mat. 😉
why do you people always use such annoying music--it sucks
LOL I have had a couple of people complain about the music that I chose... 🤣
Very cool
Thank you!